Philips PML8709 vs SONY BRAVIA 3

Looking at the results of the contrast, we expected that the algorithms responsible for the operation of zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is difficult to explain. The average brightness we managed to achieve was only 350 nits, which is definitely too little to fully enjoy the effects of HDR. In practice, the television barely stands out against the backdrop of an average SDR. The situation becomes even more surprising for test scenes, such as the second one from the film Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically imperceptible. Such a level of brightness is completely at odds with contemporary HDR standards and significantly diminishes the experience of watching high-quality content. The only bright spot in this category is the very good coverage of wide colour gamuts – DCI-P3 at 97% and BT.2020 at 83%. This means that the colours are saturated and well-reproduced, which may improve the overall experience of watching HDR materials, if only a little. However, the lack of adequate brightness means that even this cannot save the Philips PML8709 in this category.

Bravia 3 does not hide the fact that it belongs to the group of televisions that are rather modest in terms of brightness. Our measurements showed around 370 nits, which is a value teetering on the edge of where one can still speak of any HDR effect. For some, this is an acceptable level, while for others it is rather typical for SDR content, where spectacular highlights or vivid contrasts are not expected. The impression is that this is not a television for those focused on the highest image quality in demanding cinematic content. However, this does not mean that we cannot find any advantages here. Compared to its predecessor, the X75WL, Bravia 3 has gained an additional PFS filter, which works similarly to solutions known from QLED technology. Thanks to this, the DCI-P3 colour palette has been significantly widened and reaches over 91 percent, which in practice results in more saturated colours and a more pleasing image texture. As a result, even everyday content looks somewhat livelier, and films and series can surprise with vibrant visuals, despite limitations in brightness itself.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural colour reproduction, in reality it resembles store mode more closely. In the white balance, both for HD and 4K content, there is a clear dominance of the blue colour. This causes the image to appear washed out and cold, which is particularly noticeable in the comparative photo below.

The brightness characteristics also leave much to be desired. Both the gamma and EOTF curve show excessive screen brightening. As a result, there is a loss of detail in both the brighter and darker areas of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and lacking in variety.

These significant issues in white balance and brightness characteristics lead to noticeable errors in colour reproduction, which can be easily seen in films as well as in the Colour Checker test. The colours are inaccurate, impacting the overall image quality and visual experience. The factory settings require significant improvement in order to fully enjoy the potential of this television.

Sony Bravia 3 was primarily tested in film mode, which immediately proved to be the best choice among the factory settings. It is not a perfect picture, but compared to the eco mode that the television offers right out of the box, the difference is clear and positive. In film mode, one can notice a certain problem: the image appears too warm, which results from a lack of blue colour in the white balance. Despite this, in SDR content, the final effect can still be considered quite decent and satisfactory for everyday viewing. Much more serious errors occur in HDR materials. The Color Checker analysis showed considerable deviations, and poor brightness management, combined with limited colour gamut coverage, further exposes the shortcomings of the image in this mode. All of this makes HDR on the Bravia 3 appear unconvincing and can spoil the impression left by the quite decent SDR content setting. Fortunately, this is not an insurmountable situation. Various errors can be somewhat mitigated, and some can even be fully corrected through professional calibration. Therefore, we decided to check how the television would perform after such adjustments.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilise. The results? Although we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, this can be described as a fight against windmills. We managed to correct it significantly, resulting in the image now looking much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is visible, although not as intense as before. We achieved a substantial improvement in brightness characteristics – gamma now appears much more stable. The EOTF curve initially looks correct, however, when analysing film content, it is evident that the television struggles to maintain the appropriate characteristics. The algorithms are "battling," trying to adjust brightness, which may stem from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasing to the eye – colours are more natural, and errors in colour reproduction have been minimised. Although it is still not perfect, the Philips PML8709 now performs significantly better than in the factory settings.

The calibration allowed us to extract significantly more from the Bravia 3 than we could have expected at the beginning. Firstly, it managed to compensate for the deficiency of blue, which had previously caused a noticeable warming of the image. After a slight adjustment to the white balance, most of the errors in the Color Checker measurements for SDR content virtually disappeared. The white tones became more natural, and the brightness management in gamma stabilised to an almost ideal level, not exceeding the threshold of human perception. Thus, it can be confidently stated that in SDR content, after a few adjustments to the settings, the Bravia 3 performs remarkably well. Significantly worse, although still definitely better than before calibration, are HDR contents. The white balance was brought into order, however, the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which immediately stands out. Colour-wise, the effect is also improved, though far from perfect – many errors still exceed the threshold of four or even five delta E units, meaning they remain visible to the human eye. It was already clear earlier that the Bravia 3 is not a television designed to impress with HDR quality. Nevertheless, it is gratifying that in SDR content, after calibration, the image can look truly excellent, and in this category, the television pleasantly surprised us.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, which means that certain tonal transitions may still appear a bit uneven. An additional drawback is that this function also smooths out other details, such as the textures of materials like a shirt, which can affect the sharpness of the image.

When it comes to image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggedness." This effect may appeal to many users, although some may prefer a more pronounced appearance. Fortunately, the television allows for sharpness adjustment, and this enables us to tailor the image to individual preferences.

Bravia 3 brings something more to the Sony TV family than just a shared name. It stands out primarily for its ability to enhance the quality of weaker materials thanks to the processor used. Of course, we won’t find the advanced XR chip known from more expensive models here, but even so, it must be admitted that the image in lower resolutions looked surprisingly good. The scaling worked effectively, and most parts of the screen were free from the typical excessive edge tearing found in budget constructions.

Attention should also be paid to the function that improves the smoothness of tonal transitions. In the high setting, it works really well, effectively masking gradation imperfections without significant detail loss. It does happen, however, that the algorithm overly smooths elements that should remain sharp – for example, faces – but overall, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to those watching lower quality content.

The Philips PML8709 is one of the few models with mini-LED technology on the market, offering a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch films. The television is equipped with the "Motion Style" function, which is a motion smoother that allows you to adjust the smoothness of motion according to preferences – from a more "plastic" look to a cinematic aesthetic with clearly visible frames.

The fluidity of motion has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that may appeal to those more sensitive to the way images are displayed. We are talking about the proprietary motion smoother, Motion Flow, which offers users a considerable range of adjustment options. Thanks to it, one can make the image smoother, even theatrical, or stick to a more cinematic style with the characteristic judder that many simply associate with the filmic atmosphere. These functions work with content at lower frame rates, such as films and series recorded at 24 or 30 frames per second, which are the materials we encounter on a daily basis. It is here that the motion smoother proves to be one of the most important features in everyday use of the television, and this is where the Bravia 3 performs quite well.

Philips PML8709 is a television aimed more at casual gamers, primarily due to its 60 Hz panel, which may not meet the expectations of the most demanding users. However, for those who appreciate gaming at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help deliver smoother visuals without annoying stutters. Furthermore, in terms of HDR, it includes an HGiG implementation that adjusts HDR effects to the specifics of games, providing a more natural image in properly optimised titles. Unfortunately, it lacks support for Dolby Vision mode, which may be noticeable in games that utilise this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick viewing and modification of the most important gaming-related settings. This is a simple but useful feature, especially for those who often switch configurations between different types of gameplay. Despite some limitations, Philips PML8709 offers a solid set of features for less demanding gamers.

Bravia 3 is not equipment for e-sports enthusiasts or fans of night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports closes the topic before it even has a chance to develop. This is a television for casual gamers who will play FIFA or racing games after work, not for someone who measures every frame in a spreadsheet. Nevertheless, Sony has added a few nice extras to ensure it’s not too sparse. ALLM works as it should, automatically switching the television to game mode (low latency). There’s even a simple Game Bar, which is clear. However, the biggest novelty here is the PlayStation Portal app. Thanks to it, you can launch PS5 games wirelessly and view them immediately on the television screen. It sounds great, but just a few minutes is enough to feel significant lag. In our opinion, it’s more of a showcase of capabilities than something that can be used every day. If someone really wants to play, it’s better to connect the console via HDMI cable and forget about wireless issues.