Philips PML8709 vs Philips PUS7000

Looking at the results of the contrast, we expected that the algorithms responsible for the operation of zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is difficult to explain. The average brightness we managed to achieve was only 350 nits, which is definitely too little to fully enjoy the effects of HDR. In practice, the television barely stands out against the backdrop of an average SDR. The situation becomes even more surprising for test scenes, such as the second one from the film Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically imperceptible. Such a level of brightness is completely at odds with contemporary HDR standards and significantly diminishes the experience of watching high-quality content. The only bright spot in this category is the very good coverage of wide colour gamuts – DCI-P3 at 97% and BT.2020 at 83%. This means that the colours are saturated and well-reproduced, which may improve the overall experience of watching HDR materials, if only a little. However, the lack of adequate brightness means that even this cannot save the Philips PML8709 in this category.

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural colour reproduction, in reality it resembles store mode more closely. In the white balance, both for HD and 4K content, there is a clear dominance of the blue colour. This causes the image to appear washed out and cold, which is particularly noticeable in the comparative photo below.

The brightness characteristics also leave much to be desired. Both the gamma and EOTF curve show excessive screen brightening. As a result, there is a loss of detail in both the brighter and darker areas of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and lacking in variety.

These significant issues in white balance and brightness characteristics lead to noticeable errors in colour reproduction, which can be easily seen in films as well as in the Colour Checker test. The colours are inaccurate, impacting the overall image quality and visual experience. The factory settings require significant improvement in order to fully enjoy the potential of this television.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilise. The results? Although we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, this can be described as a fight against windmills. We managed to correct it significantly, resulting in the image now looking much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is visible, although not as intense as before. We achieved a substantial improvement in brightness characteristics – gamma now appears much more stable. The EOTF curve initially looks correct, however, when analysing film content, it is evident that the television struggles to maintain the appropriate characteristics. The algorithms are "battling," trying to adjust brightness, which may stem from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasing to the eye – colours are more natural, and errors in colour reproduction have been minimised. Although it is still not perfect, the Philips PML8709 now performs significantly better than in the factory settings.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, which means that certain tonal transitions may still appear a bit uneven. An additional drawback is that this function also smooths out other details, such as the textures of materials like a shirt, which can affect the sharpness of the image.

When it comes to image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggedness." This effect may appeal to many users, although some may prefer a more pronounced appearance. Fortunately, the television allows for sharpness adjustment, and this enables us to tailor the image to individual preferences.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

The Philips PML8709 is one of the few models with mini-LED technology on the market, offering a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch films. The television is equipped with the "Motion Style" function, which is a motion smoother that allows you to adjust the smoothness of motion according to preferences – from a more "plastic" look to a cinematic aesthetic with clearly visible frames.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

Philips PML8709 is a television aimed more at casual gamers, primarily due to its 60 Hz panel, which may not meet the expectations of the most demanding users. However, for those who appreciate gaming at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help deliver smoother visuals without annoying stutters. Furthermore, in terms of HDR, it includes an HGiG implementation that adjusts HDR effects to the specifics of games, providing a more natural image in properly optimised titles. Unfortunately, it lacks support for Dolby Vision mode, which may be noticeable in games that utilise this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick viewing and modification of the most important gaming-related settings. This is a simple but useful feature, especially for those who often switch configurations between different types of gameplay. Despite some limitations, Philips PML8709 offers a solid set of features for less demanding gamers.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.