Philips PML8709 vs Philips OLED811

Looking at the results of the contrast, we expected that the algorithms responsible for the operation of zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is difficult to explain. The average brightness we managed to achieve was only 350 nits, which is definitely too little to fully enjoy the effects of HDR. In practice, the television barely stands out against the backdrop of an average SDR. The situation becomes even more surprising for test scenes, such as the second one from the film Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically imperceptible. Such a level of brightness is completely at odds with contemporary HDR standards and significantly diminishes the experience of watching high-quality content. The only bright spot in this category is the very good coverage of wide colour gamuts – DCI-P3 at 97% and BT.2020 at 83%. This means that the colours are saturated and well-reproduced, which may improve the overall experience of watching HDR materials, if only a little. However, the lack of adequate brightness means that even this cannot save the Philips PML8709 in this category.

Philips OLED811 uses a new generation of WOLED EX panels, also found in models such as the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see this clearly in films and series. All kinds of bright flashes have the right intensity, especially when they appear against a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that does not mean you will see that level of brightness in every shot. When the screen is filled with a large amount of white or a wide explosion, brightness falls to around 600 nits. That is still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. You get saturated reds and lush greens, and when watching it’s hard to find major faults in that respect. It looks a little worse with the much wider BT.2020 gamut, whose most saturated shades are already out of reach for this panel. There is also the issue of the white subpixel that the WOLED panel uses to boost brightness. With very bright colours you can see a certain washout: the colour is bright but loses some of its intensity. It is precisely in such situations that QD-OLED panels from Samsung Display have the advantage. However, in most films and series this is not something that will immediately stand out.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural colour reproduction, in reality it resembles store mode more closely. In the white balance, both for HD and 4K content, there is a clear dominance of the blue colour. This causes the image to appear washed out and cold, which is particularly noticeable in the comparative photo below.

The brightness characteristics also leave much to be desired. Both the gamma and EOTF curve show excessive screen brightening. As a result, there is a loss of detail in both the brighter and darker areas of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and lacking in variety.

These significant issues in white balance and brightness characteristics lead to noticeable errors in colour reproduction, which can be easily seen in films as well as in the Colour Checker test. The colours are inaccurate, impacting the overall image quality and visual experience. The factory settings require significant improvement in order to fully enjoy the potential of this television.

Film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain small, both in SDR and HDR, so you can sit down to watch without adjusting the settings first. There are no major inaccuracies that would immediately distract from the film. It falls a little short of perfection, though. The white balance shows a slight lack of red compared with green, so whites and greys can have a faint greenish tint. It is not a strong colour cast, but measurements clearly show it. There are also minor brightness deviations in SDR: some parts of the image are slightly brightened, and the darkest shades are not always reproduced evenly. In HDR the TV sticks much closer to the reference, although in places it gently lifts detail from the shadows. These are generally areas that could be improved. The factory film mode provides a good starting point, and calibration will reveal how much more can be gained from it.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilise. The results? Although we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, this can be described as a fight against windmills. We managed to correct it significantly, resulting in the image now looking much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is visible, although not as intense as before. We achieved a substantial improvement in brightness characteristics – gamma now appears much more stable. The EOTF curve initially looks correct, however, when analysing film content, it is evident that the television struggles to maintain the appropriate characteristics. The algorithms are "battling," trying to adjust brightness, which may stem from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasing to the eye – colours are more natural, and errors in colour reproduction have been minimised. Although it is still not perfect, the Philips PML8709 now performs significantly better than in the factory settings.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to correct the white balance and eliminate the slight tint visible in the factory settings. Errors in the Color Checker measurements for SDR and HDR fell to around 1 to 2, and many samples are even below 1. That's a level at which differences from the reference image are hard to spot with the naked eye. We also improved the gamma, and only in the brightest whites is there a slight brightening remaining. In HDR the EOTF curve also tracks the reference closely, although the TV still tends to gently boost the brightness of small elements, such as stars or on-screen text. This gives the picture a little extra sparkle that shouldn't be there, but otherwise there's little to fault. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, which means that certain tonal transitions may still appear a bit uneven. An additional drawback is that this function also smooths out other details, such as the textures of materials like a shirt, which can affect the sharpness of the image.

When it comes to image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggedness." This effect may appeal to many users, although some may prefer a more pronounced appearance. Fortunately, the television allows for sharpness adjustment, and this enables us to tailor the image to individual preferences.

OLED811 handles lower-quality material reasonably well, though it falls well short of perfection. The "Banding reduction" function helps to smooth tonal transitions and on the low setting gives a fairly good result. It does not remove bands between shades as effectively as similar solutions from some competitors, but at least it does not introduce new artefacts in the process. This is a sensible setting for everyday viewing. There is still some dissatisfaction, however, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' implementations, cope with the effects of heavy compression more effectively even at similarly low settings. Much therefore depends on how a given manufacturer makes use of its capabilities. We have a few more comments about the upscaling to 4K. There is a lot of detail, but the overall image looks rather soft. Edges are heavily smoothed, which robs the picture of a bit of sharpness and clarity. This can be partly corrected with the sharpness slider in the menu, though that will merely accentuate outlines rather than recover detail. On the plus side, there is no overscan; even with an SD signal the TV does not crop the edges of the picture.

The Philips PML8709 is one of the few models with mini-LED technology on the market, offering a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch films. The television is equipped with the "Motion Style" function, which is a motion smoother that allows you to adjust the smoothness of motion according to preferences – from a more "plastic" look to a cinematic aesthetic with clearly visible frames.

In terms of motion handling the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sport, the picture stays clear and moving objects do not leave noticeable smears. The fast response of OLED pixels helps here; this is clear in the UFO test, even on dark backgrounds. There are also motion smoothing controls. For films you can adjust the level of smoothing to suit your taste, ranging from preserving a cinematic character to much smoother motion. A separate blur reduction setting is useful for fast-paced material such as sports broadcasts.

Philips PML8709 is a television aimed more at casual gamers, primarily due to its 60 Hz panel, which may not meet the expectations of the most demanding users. However, for those who appreciate gaming at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help deliver smoother visuals without annoying stutters. Furthermore, in terms of HDR, it includes an HGiG implementation that adjusts HDR effects to the specifics of games, providing a more natural image in properly optimised titles. Unfortunately, it lacks support for Dolby Vision mode, which may be noticeable in games that utilise this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick viewing and modification of the most important gaming-related settings. This is a simple but useful feature, especially for those who often switch configurations between different types of gameplay. Despite some limitations, Philips PML8709 offers a solid set of features for less demanding gamers.

OLED811 has almost everything you could expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach 165 Hz. It also has VRR, which helps prevent screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

Another plus is that HGiG works correctly, so once HDR is set on the console the TV doesn't apply its own changes to image brightness. There's also a Game Bar to check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for gaming, but there is a significant catch, which you can read about below.