Philips PML8709 vs Haier Q80FUX

Looking at the results of the contrast, we expected that the algorithms responsible for the operation of zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is difficult to explain. The average brightness we managed to achieve was only 350 nits, which is definitely too little to fully enjoy the effects of HDR. In practice, the television barely stands out against the backdrop of an average SDR. The situation becomes even more surprising for test scenes, such as the second one from the film Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically imperceptible. Such a level of brightness is completely at odds with contemporary HDR standards and significantly diminishes the experience of watching high-quality content. The only bright spot in this category is the very good coverage of wide colour gamuts – DCI-P3 at 97% and BT.2020 at 83%. This means that the colours are saturated and well-reproduced, which may improve the overall experience of watching HDR materials, if only a little. However, the lack of adequate brightness means that even this cannot save the Philips PML8709 in this category.

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural colour reproduction, in reality it resembles store mode more closely. In the white balance, both for HD and 4K content, there is a clear dominance of the blue colour. This causes the image to appear washed out and cold, which is particularly noticeable in the comparative photo below.

The brightness characteristics also leave much to be desired. Both the gamma and EOTF curve show excessive screen brightening. As a result, there is a loss of detail in both the brighter and darker areas of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and lacking in variety.

These significant issues in white balance and brightness characteristics lead to noticeable errors in colour reproduction, which can be easily seen in films as well as in the Colour Checker test. The colours are inaccurate, impacting the overall image quality and visual experience. The factory settings require significant improvement in order to fully enjoy the potential of this television.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilise. The results? Although we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, this can be described as a fight against windmills. We managed to correct it significantly, resulting in the image now looking much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is visible, although not as intense as before. We achieved a substantial improvement in brightness characteristics – gamma now appears much more stable. The EOTF curve initially looks correct, however, when analysing film content, it is evident that the television struggles to maintain the appropriate characteristics. The algorithms are "battling," trying to adjust brightness, which may stem from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasing to the eye – colours are more natural, and errors in colour reproduction have been minimised. Although it is still not perfect, the Philips PML8709 now performs significantly better than in the factory settings.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, which means that certain tonal transitions may still appear a bit uneven. An additional drawback is that this function also smooths out other details, such as the textures of materials like a shirt, which can affect the sharpness of the image.

When it comes to image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggedness." This effect may appeal to many users, although some may prefer a more pronounced appearance. Fortunately, the television allows for sharpness adjustment, and this enables us to tailor the image to individual preferences.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

The Philips PML8709 is one of the few models with mini-LED technology on the market, offering a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch films. The television is equipped with the "Motion Style" function, which is a motion smoother that allows you to adjust the smoothness of motion according to preferences – from a more "plastic" look to a cinematic aesthetic with clearly visible frames.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

Philips PML8709 is a television aimed more at casual gamers, primarily due to its 60 Hz panel, which may not meet the expectations of the most demanding users. However, for those who appreciate gaming at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help deliver smoother visuals without annoying stutters. Furthermore, in terms of HDR, it includes an HGiG implementation that adjusts HDR effects to the specifics of games, providing a more natural image in properly optimised titles. Unfortunately, it lacks support for Dolby Vision mode, which may be noticeable in games that utilise this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick viewing and modification of the most important gaming-related settings. This is a simple but useful feature, especially for those who often switch configurations between different types of gameplay. Despite some limitations, Philips PML8709 offers a solid set of features for less demanding gamers.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.