Philips MLED920 / MLED910 vs TCL P7L / P79L

Philips MLED920 in our measurements in static tests even reached around 900 nits, which is really a solid result for a mid-range model. In practice, this translates to a lot of satisfaction during viewing sessions – in scenes rich in bright light, such as the first, third or fifth test slide, the screen managed to generate about 700 nits, which is sufficient to feel the true "HDR effect." However, it cannot be denied that the limited number of dimming zones and the compromises typical of mini-LEDs in more demanding scenes reveal their nature. In sequences with small light sources – like the moon or a scene from the film Sicario 2 – the television clearly prioritises maintaining deeper blacks at the expense of the brightness of these small elements. For most viewers, this is still a reasonable compromise, as the dark background looks significantly better, though it is important to be aware that the details themselves may not impress with their intensity. There is also a certain sense of dissatisfaction regarding the colours. Although the applied PFS filter (the equivalent of quantum dots known from QLEDs) does its job and the colours appear quite vivid, the coverage of the DCI-P3 palette reaches “only” 90%. In everyday viewing, this will be sufficient, but in extremely colourful productions – like the latest Disney animations – one can notice that some tones are not as vibrant as they could be in other setups.

The biggest limitation of the TCL P7L in HDR is simply brightness. The TV does not have much luminance headroom, so strong highlights, the sun or small light sources can't clearly 'pop' out of the picture. As a result, even well-produced HDR material looks fairly restrained and, in terms of dynamics, is closer to good SDR than to what brighter models show. That does not mean the P7L completely fails at HDR. The issue is primarily a lack of backlight power.

Looking at colours, the situation is a little better. The TV covers around 91% of the DCI-P3 gamut and about 68% of the wide BT.2020 colour space, so for this price class the colour range is quite respectable. TCL markets this model as QLED, although the nature of the solution used is closer to backlighting that uses a PFS phosphor than to a classic quantum-dot layer. What matters most to the viewer, however, is the effect: more saturated colours are on offer.

Like every Philips television we tested, we primarily assessed the MLED920 in Filmmaker mode – this is meant to be the "most honest" mode, designed for films and to faithfully convey the intentions of the creators. Indeed, in terms of colour reproduction, it performs the best among all the modes available on the television, but it is not without flaws. The first thing that catches the eye is the white balance. The image has a slight tendency towards purple-pink tones, which gives it a somewhat unnatural character. An even bigger problem, however, turned out to be what we mentioned earlier – image blooming. Just looking at the gamma or EOTF charts reveals that the line significantly deviates from the norm, dropping below a value of 1.8. In practice, this means "bleeding" of the brightest whites, where the image becomes almost milky. Fortunately, most of these issues can be corrected – the MLED920 responds well to calibration, and with a few adjustments, one can significantly improve the viewing experience.

In Film mode the TCL P7L performs quite respectably without major changes to the settings, particularly with ordinary SDR material. White balance is relatively even, though as brightness increases there is a slight rise in red and blue and a touch too little green. This does not, however, produce a strongly visible tint and most colours remain close to their reference points. The Colour Checker confirms this, with a large portion of errors falling below the level that should be particularly noticeable during normal viewing. We have more reservations about the gamma response. In the darkest parts of the image the TV runs it noticeably above the reference value, so some shadow detail can be a little too subdued. The characteristic then calms down and across much of the range it is close to the intended behaviour. As a result SDR generally looks natural, but in dark scenes the P7L can lose some subtlety.

In HDR the factory calibration is less precise. As brightness increases the excess of blue becomes more pronounced, which can make the image look cooler than it should. The number of larger colour deviations also grows, particularly in brighter hues. As for the EOTF curve itself, it is handled fairly conservatively, with the TV showing the image darker than the reference across much of the range. For such an inexpensive model, the factory Film mode settings are not bad.

After calibration, we managed to largely tame the white balance – to the extent that the average viewer will not be able to detect distortions in colours. The characteristic pink-purple haze that previously disrupted the naturalness of the image has also disappeared. The colour palette has been organised, and the colours appear more coherent and neutral. The gamma in SDR content post-calibration looks really good – there is no longer any mention of the previous 'bleeding' effect in bright scenes. The image has become more contrasty and devoid of that milkiness which had previously greatly harmed the viewing experience. In the case of HDR content, the improvement is also noticeable, although here it is still evident that the television is going 'its own way'. The EOTF curve cannot be fully shaped, as Philips simply does not offer the tools to allow precise control over this parameter in its settings. In many films, the television still exposes the image 'in its own way'. Despite these limitations, the calibration has delivered quite a bit of good – most of the colour distortions have been minimised, and the overall balance of the image has significantly improved. However, it must be noted that certain barriers stem from the very design of the hardware and simply cannot be overcome.

After calibration the TCL P7L can deliver a genuinely pleasant picture, especially with conventional SDR material. We managed to even out the white balance very well, and the gamma curve now tracks close to the target value of 2.4. This is also reflected in the colour measurements: most errors have fallen noticeably, and in everyday viewing it is hard to point to any obvious inaccuracies. Films, series, YouTube and ordinary broadcast TV therefore look more natural, without unnecessary warmth or a cool tint. For a model in this price bracket the SDR performance is really very good.

With HDR the situation becomes more complicated. Calibration helped improve the white balance and tidy up some deviations, but here the panel's limitations become increasingly apparent. The P7L has relatively low brightness and cannot maintain adequate luminance for more saturated colours, so some errors remain even after careful tuning. In other words, settings can improve the way the TV interprets the signal, but they cannot overcome its physical limits. That is why calibration makes most sense for this model primarily in SDR.

The manufacturer has equipped this model with several features that improve signal quality, and although we usually approach such "enhancements" with caution, here they prove to be really helpful. The key option is called "distortion reduction" – it works best at a medium level, as on one hand it effectively smooths out unwanted stair-stepping and colour banding, while on the other it does not excessively cut out details, allowing the image to still look natural.

Things are a bit worse with upscaling. Lower quality materials – such as the test video with the model – appeared soft and lacking in sharpness. Indeed, it can be partially corrected with the sharpness slider in the menu, but the effect remains far from what competitors in a similar price range offer. Philips therefore still needs to work on this element, as compared to the successful improvement of tonal transitions, the upscaling simply falls short.

In this respect the TCL P7L performs surprisingly well, especially for such an inexpensive TV. The banding-reduction feature, which in many budget models does little or nothing, actually manages to improve the picture here. It does not remove all banding entirely, but it can noticeably reduce posterisation and make more challenging gradients look more natural. At this price point that’s a genuinely pleasant surprise. Upscaling itself also performs well. Lower-resolution material is scaled correctly, without over-sharpening or adding artificial outlines around objects. Of course the P7L won’t turn a very poor source into a 4K-quality image, but for regular TV the result is simply solid. For a model in this class there is little to criticise.

The Philips MLED920 features a 144 Hz panel, which immediately suggests that we shouldn't complain about motion smoothness. And indeed – the motion blur is relatively low for a VA panel, and although slight issues can sometimes be noticed on darker backgrounds, they are not something that would stand out to most people during regular viewing.

Another significant advantage is the presence of a motion smoother called “Motion Style.” It allows you to adjust the sensation of smoothness to your own preferences – if someone prefers a more “theatrical,” almost television-like image, they can increase the sliders, whereas if they prefer to maintain the natural “jumps” of cinematic frames, it’s enough to set lower values. This way, everyone can find their golden mean.

The TCL P7L uses a panel with a native 60 Hz refresh rate at 4K resolution, and that's how it should be regarded in everyday use. When watching films the TV mainly offers frame interpolation, so it can smooth motion and reduce the characteristic judder, but it does not deliver the fluidity typical of true 120 Hz panels.

For gamers, the Philips MLED920 is truly a complete tool. The manufacturer has taken care of everything that is considered standard in televisions designed for consoles and PCs today. It features ALLM, so the console automatically switches the screen to game mode, alongside VRR and a refresh rate of 144 Hz, which guarantees smooth gameplay even in fast-paced titles. All key HDR formats are supported – including HGiG and Dolby Vision Gaming for Xbox – which means that regardless of what you are playing and on which console, the television will be able to extract the maximum potential from the image. The Game Bar also proves useful in daily gaming – a relatively simple implementation by Philips, but a functional panel where you can quickly check image parameters, enable VRR or adjust settings without leaving the game. It may not be as comprehensive as the competition, but it performs its task flawlessly. And finally, something that sets Philips apart from the competition – Ambilight. The three-sided LED backlighting can create a huge impression in games, especially in the evening. It's also a way to slightly 'extend' the screen and enhance the feeling of immersion. And as colourful LEDs have recently become almost a mandatory element of a gamer’s room, the MLED920 fits into this trend perfectly.

For such an inexpensive TV, the P7L has quite a lot to offer gamers. It has ALLM, VRR, Dolby Vision for gaming, and TCL also includes its Game Bar, which lets you quickly check the key information or change some settings without leaving the game. Not everything is perfect, though, because HGiG doesn’t work here as it should, but at this price point it’s hard to complain about the feature set. The most interesting part starts when you give up 4K. At that resolution the TV runs at up to 60 Hz, but at 1440p and 1080p it can display at 120 Hz. And that’s not just a line in the specs. In fast-paced games that support that frame rate you can really notice the improvement in smoothness, so if you value smoother motion more than maximum image detail, that mode can make a lot of sense. Of course, that doesn’t turn the P7L into a proper 120 Hz TV. Even so, those extra modes are exactly what make the P7L perform very well for gaming.