Panasonic W70A vs Samsung The Frame 2025 (LS03F)

HDR on the Panasonic W70A unfortunately does not impress. A brightness level of 250–300 nits is simply too low to feel the true magic of cinematic effects in dynamic, bright scenes. Images that should “burst” with light look rather flat, and fine details in bright areas often get lost in the average luminance of the panel. On the positive side, the HDR effect is at least stable. The television does not fall into excessive brightness or lose details during rapid scene changes. Everything is predictable and calm, although unfortunately rather unimpressive. Another issue is the colour gamut coverage. The W70A has not been equipped with an additional layer of quantum dots (often known as QLED), which means the colours appear rather mediocre. There is a lack of depth in reds, saturation in greens, and precision in reproducing subtle shades.

The Frame LS03F is a television that can surprise with its brightness. The maximum luminance reaches around 650 nits, which already looks impressive on paper. But as we know, laboratory tests are one thing, and real film scenes are quite another. When watching HDR materials in natural conditions, The Frame 2025 maintains very good results. In most film scenes, the peak brightness remained at around 550–650 nits. This is a sufficient value to feel the difference between standard picture quality and that of HDR – bright highlights, reflections on water, or moonlight are presented clearly and spectacularly.

It is also worth remembering that the LS03F is a QLED television, which translates into solid colour saturation. The coverage of the DCI-P3 colour space reaches about 92%, allowing for vibrant, intense colours in HDR content. This is not the level of top premium models, but for a lifestyle screen, the result truly deserves recognition.

The Panasonic W70A was tested by us in movie mode, which theoretically should guarantee the most natural image reproduction. Unfortunately, as is often the case with budget TVs, the reality proved far from ideal.

In HD (SDR) content, the white balance was severely disrupted by an excess of red and a noticeable drop in blue tones. The effect? The image had a distinctly warm, almost yellowish glow, which is clearly visible in the comparison photo. In the case of 4K HDR material, the situation reversed. Here, the image became excessively cold and bluish, causing scenes to lose their naturalness and depth. The differences are visible even to the naked eye, especially in the bright areas of the image. The Colour Checker palette test confirmed our observations. Most colour samples did not hit their intended points, "drifting" towards warmer shades in SDR and cooler ones in HDR. As for brightness characteristics, both gamma and the EOTF curve showed significant issues. The image tended to excessively brighten certain areas, disrupting balance and leading to a loss of detail in darker and lighter regions.

In summary – the factory colour reproduction settings in the Panasonic W70A leave much to be desired. The image is far from neutral, and errors in white balance and gamma mean that a solid calibration is needed to extract the TV's full potential.

When it comes to image quality straight out of the box, even in Filmmaker mode, which is supposed to be the closest to reference, there were issues. We noticed clear deviations in white balance in both HD and 4K HDR content. The image was heavily skewed towards red and blue, giving the screen a characteristic pinkish tint. This effect was most noticeable in bright scenes – for example, in shots with a lot of white, where neutral light should naturally dominate. At such moments, the screen clearly took on pink tones, which is also visible in the attached comparison photo. As for the brightness characteristics – it wasn’t as bad as one might expect with such colour inaccuracies. The analysis of the gamma curve and EOTF showed a slight brightening of the image compared to the reference, but not enough to drastically ruin the viewing experience.

Panasonic W70A, despite its limitations, provided us with considerable scope during calibration. Thanks to well-developed tools, we managed to achieve a significantly better white balance in both HD (SDR) and 4K HDR content. The issues with excess red in SDR and overly cool images in HDR have disappeared. The gamma brightness characteristic has also improved, maintaining stability and preventing excessive brightening or loss of detail in darker areas.

So where is the problem? Unfortunately, there are barriers that even professional calibration cannot overcome. Poor coverage of a wide color gamut means that the television cannot fully reproduce colours in HDR material. There is a lack of saturation, and subtle colour transitions still appear somewhat "flattened." Another limitation is brightness management, which results from the applied IPS panel. In the comparative image with the actress's face in colourful clothing, it is clearly visible how some shades are noticeably muted, and colours lose their depth and vibrancy.

Calibration has extracted from the W70A as much as possible. The image is now significantly more natural, and the errors in the factory settings have been effectively corrected. Unfortunately, hardware limitations in the form of poor colour gamut coverage and an average panel mean that even after calibration, we are unable to achieve spectacular effects, especially in HDR content.

After calibration, the movie mode has gained a completely new quality. The issue of the pink tint, which had been clearly visible before, especially in bright scenes, has been effectively eliminated. Colours now look much more natural, and the white balance no longer dominates the rest of the image. It is no longer the same exaggerated "box picture" – everything now has coherence and a cinematic character. Additionally, the tendency of the television to slightly brighten scenes, previously visible in the EOTF curve analysis, has been partially corrected. Of course, this is within the limits of what the design allows without local dimming – one cannot speak of perfect brightness management here. Nevertheless, the final effect was definitely closer to what one might expect from a mode called Filmmaker.

We checked how the Panasonic W70A performs when improving content of lower quality than 4K, and it must be said that in this regard, the television does quite respectably. The "Zeroing Counter" function is responsible for smoothing tonal transitions. The optimal setting turned out to be the Average option, which effectively smooths out issues with colour gradation while not ruining the film grain. This is the setting we recommend for most users, as it provides a balance between enhancing the smoothness of transitions and maintaining the naturalness of the image.

When it comes to image scaling, the Panasonic W70A performed really well. The test panel with a model was positively received – the details on her clothing were well reproduced, and the contours of her face retained clarity. In the background, we noticed slight "jaggies" on thin branches, but these are details that only a very keen eye would catch. However, it is worth noting a certain drawback of this model – the television tends to overscan, or slightly cropping the edges of the image. This is not a very intense phenomenon and will be practically unnoticeable for most users, but if we care about a perfect fit of the frame, it is worth keeping this in mind.

LS03F has been equipped with the NQ4 processor, which is responsible for improving image quality – particularly in lower quality materials. In practice, this works surprisingly well, especially when it comes to older content and recordings with lower resolution. Activating the "noise reduction" function yields noticeable effects. The TV effectively smooths tonal transitions and removes digital noise that can appear in darker areas of the image. Compared to previous generations, there is a clear advancement – previously, this function often smoothed everything too much, including details that it shouldn't remove. In this year's model, smoothing still occurs, but in a much more acceptable manner. Textures of materials, skin, and fabric details are no longer subdued as strongly as before – the image retains more naturalness. However, this does not change the fact that film grain is still removed by the TV, which may not appeal to everyone. On the other hand, it is no longer as aggressive an intervention as in previous models. It is also worth mentioning that the LS03F may struggle with very weak signals – for example, from VHS tape recordings or low-resolution video. In such cases, we noticed slight clipping of the image at the edges – so-called overscan. This can lead to a situation where a small part of the image (e.g., subtitles at the bottom edge) gets cut off.

The Panasonic W70A is equipped with a 60 Hz panel, which immediately suggests that the television is best suited for watching films, series, or everyday TV content. In more dynamic scenes, such as sports broadcasts or games, the limitations of the panel become more noticeable. However, it is worth noting the presence of a motion smoother called "Effect", which offers three degrees of adjustment - low, medium, and high.

Each of the settings allows you to adjust the smoothness of motion to your own preferences, minimising motion blur and improving clarity in dynamic shots. In practice, the Medium setting seems to be the most versatile – it offers better fluidity without excessive "soap opera effect", which can look artificial in feature films. The High setting may work well for sports broadcasts, but in films, it can disrupt the natural character of motion.

The new feature in The Frame for 2025 is a display with a refresh rate of 144 Hz. Yes – in a television that is mainly associated with displaying works of art, you can now not only watch Van Gogh but also comfortably play on a console or follow dynamic sports events. This is a definite step towards greater versatility. In the case of Samsung films, as usual in models with a display rate of 120 Hz and above, it allows you to adjust motion smoothness according to your preferences. You can set a more cinematic reproduction while maintaining frame rate or opt for full motion smoothing. The range of options is broad, allowing you to tailor the effect to your own taste – whether the viewing experience is meant to resemble classic cinema or a show on a modern theatre screen.

*this part of the test refers to the LS03FAU model in sizes 55 and 65 inches, which is equipped with a 144Hz panel, while sizes 43 and 50 inches have 60Hz displays, and thus perform much worse in terms of motion smoothness.

The Panasonic W70A is a television that is more suited to occasional gamers than to avid players. The 60 Hz panel does not allow for the full potential of next-generation consoles to be realised, especially in dynamic titles. The lack of HDMI 2.1 somewhat limits its capabilities, but fortunately, it features functions such as ALLM, which automatically switches to game mode, and VRR, which helps minimise screen tearing. It is worth noting the support for Dolby Vision in games and HGiG, which makes HDR more predictable and looks solid. It is just a shame that there is no Game Bar. This feature has become standard in many televisions and provides quick access to the most important settings for gamers. The W70A performs adequately for gaming, but it has its limitations. It will work well for calmer titles, but more demanding gamers may feel a lack of fulfilment.

As we mentioned earlier – although The Frame is likely to display images and works of art most of the time, Samsung recognised that a Van Gogh enthusiast could just as easily be an avid gamer. And it must be admitted that The Frame 2025 has almost everything needed to become a full-fledged gaming television.

On board, we find support for ALLM (Automatic Low Latency Mode) and Variable Refresh Rate (VRR) thanks to the implementation of one HDMI 2.1 port. The television handles lower resolutions at higher refresh rates effortlessly and features an advanced Game Bar – already known from other Samsung models – which allows for a quick preview and change of the most important gaming-related settings. For this, it earns extra points from us. The proprietary motion smoother Auto Motion Plus Game is also worth mentioning, which – it is worth emphasising – operates without increasing input lag. Samsung remains the only manufacturer that has managed to implement this feature in a practically invisible manner in terms of delays. The effect? Much better fluidity in games, especially those that struggle to maintain a stable 60 frames per second. This solution can realistically improve the gaming experience in more demanding titles – particularly on consoles, which do not always manage full fluidity, especially in AAA games.

As for the downsides – the lack of Dolby Vision is already considered standard in Samsung televisions, so there is not much to particularly criticise here. However, there is a different issue entirely. In the latest version of the Tizen system, the HGiG option has disappeared. Literally – it is not there. This is a significant hindrance when configuring the console for proper HDR content display in games. It is hard to understand why such a decision was made, but one thing is certain – this should be fixed as soon as possible. We are talking about a brand that has set standards for gaming on televisions for years. If HGiG returns – and we hope it will – The Frame LS03F can confidently aspire to be called a genuine gaming television. Not just as a decoration on the wall, but as equipment that truly provides joy in gaming.