Panasonic W70A vs Hisense A6Q

HDR on the Panasonic W70A unfortunately does not impress. A brightness level of 250–300 nits is simply too low to feel the true magic of cinematic effects in dynamic, bright scenes. Images that should “burst” with light look rather flat, and fine details in bright areas often get lost in the average luminance of the panel. On the positive side, the HDR effect is at least stable. The television does not fall into excessive brightness or lose details during rapid scene changes. Everything is predictable and calm, although unfortunately rather unimpressive. Another issue is the colour gamut coverage. The W70A has not been equipped with an additional layer of quantum dots (often known as QLED), which means the colours appear rather mediocre. There is a lack of depth in reds, saturation in greens, and precision in reproducing subtle shades.

The Hisense A6Q is unfortunately difficult to recommend for watching HDR content. The main issues are low brightness and rather modest coverage of a wide colour gamut. The measured brightness of around 300 nits simply isn't sufficient for HDR materials to look impressive. In practice, the picture often resembles standard SDR instead of true HDR with clear differences in brightness and dynamics. Additionally, the colours in such materials do not appear as they should. The television does not utilise additional filters such as QLED or PFS LED, and the coverage of the DCI-P3 colour space at around 80% means that some colours look rather washed out. Consequently, some scenes in HDR materials lose intensity and spectacle, making it difficult to speak of a full HDR experience.

The Panasonic W70A was tested by us in movie mode, which theoretically should guarantee the most natural image reproduction. Unfortunately, as is often the case with budget TVs, the reality proved far from ideal.

In HD (SDR) content, the white balance was severely disrupted by an excess of red and a noticeable drop in blue tones. The effect? The image had a distinctly warm, almost yellowish glow, which is clearly visible in the comparison photo. In the case of 4K HDR material, the situation reversed. Here, the image became excessively cold and bluish, causing scenes to lose their naturalness and depth. The differences are visible even to the naked eye, especially in the bright areas of the image. The Colour Checker palette test confirmed our observations. Most colour samples did not hit their intended points, "drifting" towards warmer shades in SDR and cooler ones in HDR. As for brightness characteristics, both gamma and the EOTF curve showed significant issues. The image tended to excessively brighten certain areas, disrupting balance and leading to a loss of detail in darker and lighter regions.

In summary – the factory colour reproduction settings in the Panasonic W70A leave much to be desired. The image is far from neutral, and errors in white balance and gamma mean that a solid calibration is needed to extract the TV's full potential.

We conducted the tests in the best available mode, namely Filmmaker, however – as is often the case – this does not mean an ideal image straight out of the box. In the case of Hisense A6Q, this mode clearly "swallowed" too much blue in everyday SDR content. In practice, this led to an image with a yellowed white, particularly noticeable on large, bright surfaces. This is not due to poor assumptions of the Filmmaker mode itself or the vision of filmmakers, but rather the factory settings requiring adjustment.
Furthermore, looking at the saturation characteristics and the gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

Panasonic W70A, despite its limitations, provided us with considerable scope during calibration. Thanks to well-developed tools, we managed to achieve a significantly better white balance in both HD (SDR) and 4K HDR content. The issues with excess red in SDR and overly cool images in HDR have disappeared. The gamma brightness characteristic has also improved, maintaining stability and preventing excessive brightening or loss of detail in darker areas.

So where is the problem? Unfortunately, there are barriers that even professional calibration cannot overcome. Poor coverage of a wide color gamut means that the television cannot fully reproduce colours in HDR material. There is a lack of saturation, and subtle colour transitions still appear somewhat "flattened." Another limitation is brightness management, which results from the applied IPS panel. In the comparative image with the actress's face in colourful clothing, it is clearly visible how some shades are noticeably muted, and colours lose their depth and vibrancy.

Calibration has extracted from the W70A as much as possible. The image is now significantly more natural, and the errors in the factory settings have been effectively corrected. Unfortunately, hardware limitations in the form of poor colour gamut coverage and an average panel mean that even after calibration, we are unable to achieve spectacular effects, especially in HDR content.

The colours after calibration in the Hisense A6Q should be assessed in two ways, as everything depends on the type of content. In the case of SDR material, the effect is truly very good. In everyday programmes, series, and films, it is difficult to spot any serious problems with colours. The yellow tint has been effectively removed, and the television no longer brightens the entire image. As a result, the ColorChecker test showed errors below Delta 2 values, which are already outstanding results, allowing us to speak of very high image quality in standard content. Unfortunately, the situation looks significantly worse in the case of HDR material. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means the television still generates quite significant colour errors. Certain colours simply cannot be displayed by the screen, making them appear less saturated than they should be. It's a shame because even a simple PFS or QLED filter would significantly improve the final effect. The conclusion is therefore simple – the A6Q is really very well suited for SDR content after calibration, while watching HDR content on it should still be approached with caution.

We checked how the Panasonic W70A performs when improving content of lower quality than 4K, and it must be said that in this regard, the television does quite respectably. The "Zeroing Counter" function is responsible for smoothing tonal transitions. The optimal setting turned out to be the Average option, which effectively smooths out issues with colour gradation while not ruining the film grain. This is the setting we recommend for most users, as it provides a balance between enhancing the smoothness of transitions and maintaining the naturalness of the image.

When it comes to image scaling, the Panasonic W70A performed really well. The test panel with a model was positively received – the details on her clothing were well reproduced, and the contours of her face retained clarity. In the background, we noticed slight "jaggies" on thin branches, but these are details that only a very keen eye would catch. However, it is worth noting a certain drawback of this model – the television tends to overscan, or slightly cropping the edges of the image. This is not a very intense phenomenon and will be practically unnoticeable for most users, but if we care about a perfect fit of the frame, it is worth keeping this in mind.

Upscaling on the Hisense A6Q works quite decently for a television in this price range. Materials of lower resolution are correctly "upscaled" to a higher one, and the image remains clear without artificial edge enhancement or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly worse. In practice, it is difficult to speak of any advanced artifact smoothing or problematic tonal transition masking. In heavily compressed films – especially those from YouTube – the television practically struggles with reducing compression blocks and unwanted banding, making the imperfections in the material clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the quality of the source.

The Panasonic W70A is equipped with a 60 Hz panel, which immediately suggests that the television is best suited for watching films, series, or everyday TV content. In more dynamic scenes, such as sports broadcasts or games, the limitations of the panel become more noticeable. However, it is worth noting the presence of a motion smoother called "Effect", which offers three degrees of adjustment - low, medium, and high.

Each of the settings allows you to adjust the smoothness of motion to your own preferences, minimising motion blur and improving clarity in dynamic shots. In practice, the Medium setting seems to be the most versatile – it offers better fluidity without excessive "soap opera effect", which can look artificial in feature films. The High setting may work well for sports broadcasts, but in films, it can disrupt the natural character of motion.

The motion fluidity of the Hisense A6Q is… well — quite mediocre. It’s a television with a native refresh rate of 60 Hz in 4K, which means that the motion of objects on the screen doesn’t always look perfectly smooth. In dynamic scenes in movies or sports, it’s clear that this isn’t the strongest feature of this model. The situation improves significantly with 1080p content when connecting a console or computer, as the A6Q can operate even at 120 Hz then. This is a big plus, especially for gamers. Nevertheless, the clarity of motion still leaves much to be desired; blurring is noticeable, and the response time of the panel indicates that it is not one of this television’s strong points.

The Panasonic W70A is a television that is more suited to occasional gamers than to avid players. The 60 Hz panel does not allow for the full potential of next-generation consoles to be realised, especially in dynamic titles. The lack of HDMI 2.1 somewhat limits its capabilities, but fortunately, it features functions such as ALLM, which automatically switches to game mode, and VRR, which helps minimise screen tearing. It is worth noting the support for Dolby Vision in games and HGiG, which makes HDR more predictable and looks solid. It is just a shame that there is no Game Bar. This feature has become standard in many televisions and provides quick access to the most important settings for gamers. The W70A performs adequately for gaming, but it has its limitations. It will work well for calmer titles, but more demanding gamers may feel a lack of fulfilment.

For such an inexpensive television, the Hisense A6Q can truly surprise with what it offers to gamers. It operates in 4K only at 60 Hz, but when a game switches to performance mode and drops to 1080p, the panel can work even at 120 Hz. This is a significant advantage in this price range, as most titles on consoles don't achieve stable 4K at 120 frames per second anyway. In practice, we are realistically playing at 1080p, and here the A6Q provides very enjoyable gaming experiences. On top of that, there are several features usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so there's no need to dig through the entire menu. For such an affordable piece of equipment, it's a really solid set for gamers — perhaps not for the most demanding, but certainly spot on for occasional gaming.