LG UT8100 (IPS) vs XIAOMI S Mini 2026 (85"-98") 144Hz

Unfortunately, the LG UT8100 television does not meet expectations in the HDR effect category. With a peak brightness of only 300 nits on the luminance chart, it is well below the required value to fully enjoy the HDR effects. In practice, the image resembles SDR quality more than true HDR, which is particularly evident in demanding high-contrast scenes. The coverage of the DCI-P3 colour palette is only 82%, further limiting the ability to present vibrant and rich colours. Instead of impressive visual experiences, we receive a muted and lacklustre image. For those looking for a television to fully utilise HDR content, the LG UT8100 model proves to be quite disappointing.

The larger versions of the Xiaomi S Mini 2026 offer very similar HDR capabilities. Peak brightness reaches around 1000 nits, which for a TV in this price bracket is a very solid result. This is most apparent in bright scenes, where large, strongly lit parts of the picture can look truly impressive. The TV has enough brightness headroom that HDR does not amount to merely a slightly brighter image. Very small points of light appearing on an almost completely black background fare worse. In such cases the local dimming system significantly limits their brightness so as not to illuminate neighbouring parts of the picture and to preserve deep blacks. As a result, small highlights or single lamps do not have the same intensity as in much more expensive models. This, however, is typical behaviour for Mini LED TVs and hard to treat as something unique to Xiaomi.

HDR colours

The issue of colours is similarly close. Although the manufacturer uses the term QLED, the expansion of the colour gamut here is achieved by a PFS phosphor. In our measurements the TV covered around 94% of the DCI-P3 colour space and about 74% of the much more demanding BT.2020. In practice this delivers well-saturated colours in most HDR material and it is hard to point to any obvious shortcomings. Limitations appear mainly with the most saturated shades of green, which the TV is no longer able to reproduce in full.

The Filmmaker Mode in LG UT8100, although theoretically the best for watching films, has significant flaws. The biggest problem is the white balance – drops in blue colour cause a noticeable yellowing of the image, evident in both HD and 4K content. These errors are confirmed by the measurement results in the Colour Checker test, which indicate significant deviations in colour reproduction.

Regarding brightness characteristics, both HD and 4K content feature a substantial tonal boost. The gamma curve in both cases remains significantly below the reference value of 2.4, leading to excessive brightening of darker elements of the image. A similar issue is noticeable in the EOTF curve – for 4K content, the television struggles with properly managing brightness, which results in problems with screen brightness. This means that the factory settings of this model require significant adjustments to achieve better image quality.

In the larger versions of the Xiaomi S Mini 2026 Film mode performs best, although the factory settings here are not without faults. In SDR the white balance was noticeably warm due to an excess of red. In HDR it was the opposite: there was too much blue and not enough red, which made the image cooler. Moreover, both the gamma response in SDR and the EOTF curve in HDR were slightly above the reference values. In practice this produced a slightly brighter image, particularly in the mid-tones. It was not a major fault, but with more demanding material you could notice that the image was not reproduced entirely as the creators intended.

After calibrating the Filmmaker Mode, the gamma has been aligned to practically ideal, reference values, which has significantly improved the overall tonal characteristics of HD content. 4K HDR content also looks better, although certain issues are still visible at the extreme ends of the graph, where the curve deviates from perfection. The EOTF curve performs worse, as the television has difficulty maintaining appropriate brightness values. As a result, the image in some scenes may be overly bright or slightly dimmed, which is due to the very design of the device. Nevertheless, the calibration has brought considerable improvement, especially for HD content, where tonal balance and colour reproduction are now at a much higher level.

After calibration we mainly managed to even out the white balance, so colours look much more natural in both SDR and HDR. We also improved the gamma response, so the SDR picture is no longer unnecessarily brightened and holds closer to the reference values. The only major issue remaining is in HDR. Xiaomi still manages brightness a little too aggressively and renders some scenes brighter than it should. It looks better on larger sizes than on the 55–75 inch models, but the EOTF curve still runs slightly above the reference. In practice HDR is therefore slightly brightened, even though colour reproduction after calibration is already very good.

The fluidity of tonal transitions is also correct, although the effect depends on the settings. The update has improved the performance of the smooth gradation function, smoothing transitions better than before, but it has introduced minor issues with detail loss, e.g. on textures.

The image scaling on LG UT8100 performs very well. The image looks decent, without significant issues with edge aliasing. Details are preserved at a satisfactory level, which makes lower resolution materials look truly solid on this television. This allows users to enjoy watching older content without noticeable flaws in quality.

The larger Xiaomi S Mini 2026 variants also use the MT5896 processor and perform similarly in terms of digital image processing. Upscaling is not one of this model's strengths. Low-resolution content is upscaled to 4K in a fairly basic way, and there is not as effective retrieval of fine detail as in more refined televisions. The 85 and 98 inch versions do include a feature intended to reduce posterisation, but its effectiveness is very limited. After switching it on it is hard to notice any real improvement, so the TV still does little to address visible banding between colours.

LG UT8100, equipped with a 60 Hz panel, is particularly suited for those watching films. The television offers the TruMotion system with de-judder effect adjustment, allowing you to customise the smoothness of the image – from more choppy to exceptionally smooth, resembling a soap opera effect, depending on the user's preferences.

The biggest difference between the various sizes of the Xiaomi S Mini 2026 concerns the panel's refresh rate. The 55 to 75-inch variants use a 60 Hz panel, which in practice results in noticeably less smooth motion than the larger versions. This is most apparent when watching sport, fast-paced scenes or gaming, where the picture is not as smooth and sharp in motion.

LG UT8100 offers basic features for gamers, such as ALLM and Game Bar, which makes access to settings easier. The television also supports HGiG, which improves image quality in HDR games. Unfortunately, the lack of support for Dolby Vision and VRR limits the capabilities of the device, as does the 60 Hz panel, which excludes support for 120 Hz resolution. This model is more suitable for less demanding gaming applications.

Unfortunately, the smaller versions of the Xiaomi S Mini 2026 have a significant limitation for gamers: a 60 Hz panel. In 4K we are therefore limited to 60 fps and cannot fully take advantage of the PS5 or Xbox Series X. It is possible to run 120 Hz, but only after dropping the resolution to 1080p or 1440p. Apart from that, it’s all fairly sensible. The TV supports ALLM and automatically switches to game mode when it detects a console. There is also a Game Bar that lets you quickly check the most important gaming settings. Our biggest reservation concerns HGiG. The HDR calibration screens on the PS5 and Xbox do not match the TV’s actual capabilities. If you set HDR exactly according to them, some of the brightest elements may simply be blown out.