LG UT8100 (IPS) vs LG OLED B6

Unfortunately, the LG UT8100 television does not meet expectations in the HDR effect category. With a peak brightness of only 300 nits on the luminance chart, it is well below the required value to fully enjoy the HDR effects. In practice, the image resembles SDR quality more than true HDR, which is particularly evident in demanding high-contrast scenes. The coverage of the DCI-P3 colour palette is only 82%, further limiting the ability to present vibrant and rich colours. Instead of impressive visual experiences, we receive a muted and lacklustre image. For those looking for a television to fully utilise HDR content, the LG UT8100 model proves to be quite disappointing.

The LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year’s B5. That’s down to the new, budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR look fuller in many scenes than on last year’s lower‑end OLEDs. That does not mean the B6 has no limitations. In very bright shots, when a large part of the screen is strongly lit, brightness can fall below 400 nits. This behaviour is typical for OLED TVs, especially in this segment, and that’s where you see the biggest difference compared with more expensive models. Even so, we judge the B6’s results as genuinely solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that films truly feel like a step up from ordinary SDR. Colour gamut Using the OLED SE panel has had a slight impact on wide colour gamut coverage. Compared with last year’s model the results have fallen by a few percentage points. It covers roughly 96% of DCI‑P3 and about 71% of BT.2020. That doesn’t mean the colours on the LG B6 are weak. In most films and series they look lively, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD‑OLED panels. This stems from the WOLED panel structure. Besides red, green and blue subpixels it also uses a white subpixel, which helps to boost brightness. However, this comes at a price. At very high luminance some colour is effectively 'diluted' by the white light, so the saturation of certain colours can be slightly lower. In everyday use this isn’t a major issue, but in the most demanding scenes you can notice it.

The Filmmaker Mode in LG UT8100, although theoretically the best for watching films, has significant flaws. The biggest problem is the white balance – drops in blue colour cause a noticeable yellowing of the image, evident in both HD and 4K content. These errors are confirmed by the measurement results in the Colour Checker test, which indicate significant deviations in colour reproduction.

Regarding brightness characteristics, both HD and 4K content feature a substantial tonal boost. The gamma curve in both cases remains significantly below the reference value of 2.4, leading to excessive brightening of darker elements of the image. A similar issue is noticeable in the EOTF curve – for 4K content, the television struggles with properly managing brightness, which results in problems with screen brightness. This means that the factory settings of this model require significant adjustments to achieve better image quality.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes produce very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is, in any case, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. On SDR material the factory settings perform really well. Colour errors are small, the gamma response is correct, and the picture during normal viewing looks natural and does not feel overly "pumped up". It's a bit worse with HDR. When such content is played you quickly see that the white balance hasn't been set perfectly. Too much blue and red gives the image a slightly pink tint. This is also confirmed by colour gamut measurements and the ColorChecker, where samples clearly shift in that direction. It's not a flaw that completely spoils the picture, but it is noticeable with HDR films. Therefore anyone who wants the most faithful image should consider calibration, which we cover further on in the review.

After calibrating the Filmmaker Mode, the gamma has been aligned to practically ideal, reference values, which has significantly improved the overall tonal characteristics of HD content. 4K HDR content also looks better, although certain issues are still visible at the extreme ends of the graph, where the curve deviates from perfection. The EOTF curve performs worse, as the television has difficulty maintaining appropriate brightness values. As a result, the image in some scenes may be overly bright or slightly dimmed, which is due to the very design of the device. Nevertheless, the calibration has brought considerable improvement, especially for HD content, where tonal balance and colour reproduction are now at a much higher level.

During calibration, we concentrated mainly on HDR content, because that's where the factory settings needed the most correction. We did not, however, neglect SDR mode, which after adjustment was brought almost to perfection. Colours are very accurate, and brightness is controlled as it should be. The biggest improvement in HDR came from fixing the white balance. Removing the excess red and blue eliminated the pinkish tint, and the image became much more natural. Skin tones, whites and all colours that had previously shifted towards pink improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. So the LG B6 can deliver a very accurate picture, particularly for the manufacturer's entry-level OLED model.

The fluidity of tonal transitions is also correct, although the effect depends on the settings. The update has improved the performance of the smooth gradation function, smoothing transitions better than before, but it has introduced minor issues with detail loss, e.g. on textures.

The image scaling on LG UT8100 performs very well. The image looks decent, without significant issues with edge aliasing. Details are preserved at a satisfactory level, which makes lower resolution materials look truly solid on this television. This allows users to enjoy watching older content without noticeable flaws in quality.

The LG B6 handles lower-quality material very well. This is largely thanks to effective digital image processing, which can mask some of the source’s imperfections without overly smoothing the whole scene. The "Smooth Gradation" function proves particularly useful. It noticeably reduces posterisation, especially in dark parts of the image. The safest choice remains the Low or Medium setting. The function still effectively smooths out unsightly tonal banding, but does not yet interfere too much with fine details. Purists can of course leave it switched off. Upscaling to 4K also performs very well. Full HD and 720p material retain a good amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations only become apparent with very poor sources below 720p, where the smallest text and fine elements are not always perfectly sharp, but this applies to almost every other TV on the market.

LG UT8100, equipped with a 60 Hz panel, is particularly suited for those watching films. The television offers the TruMotion system with de-judder effect adjustment, allowing you to customise the smoothness of the image – from more choppy to exceptionally smooth, resembling a soap opera effect, depending on the user's preferences.

One of the biggest advantages of OLED panels is the very fast pixel response time. This keeps the picture sharp and free of the visible smearing often seen on LCD TVs. However, there is a downside. During slow camera pans motion can look choppier than on LCD screens, where some of that effect is naturally masked by the slower panel. Fortunately, on the LG B6 this can be easily mitigated using the TruMotion system. With the motion smoothing set correctly you can achieve smoother motion without giving the picture an exaggerated soap opera effect.

LG UT8100 offers basic features for gamers, such as ALLM and Game Bar, which makes access to settings easier. The television also supports HGiG, which improves image quality in HDR games. Unfortunately, the lack of support for Dolby Vision and VRR limits the capabilities of the device, as does the 60 Hz panel, which excludes support for 120 Hz resolution. This model is more suitable for less demanding gaming applications.

LG OLED B6 has plenty to offer gamers; it’s simply a complete base for PS5, Xbox Series X/S or a capable PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can avoid irritating cable swapping when connecting several newer devices at once. It offers a full suite of synchronization technologies, from standard VRR to G-Sync and FreeSync. The screen synchronises the refresh rate seamlessly with the frame output from the console or graphics card. Of course it includes ALLM: the B6 automatically recognises when a game is running and immediately reduces latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG standard means that, after initial calibration in the console settings, the image won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on the cake is the Game Bar. Instead of digging through the full menu during gameplay, a single click is enough to adjust shadow visibility, tweak selected parameters or simply check the current display mode. All of this makes the LG B6 an excellent choice for gamers.