LG OLED G6 (G64LW, G66LS) vs Samsung QN80H

The LG G6 is currently one of the brightest OLEDs on the market. Its peak brightness reaches nearly 2500 nits, and what’s best – this has a direct impact on real film scenes. The television flawlessly extracts details in the bright areas of the image. And this is regardless of whether we are talking about very small points like stars in the sky or slightly larger elements on the screen. Naturally, with full-screen, uniformly white scenes, the brightness of the G6 decreases due to the panel protection system (ABL). However, in real, varied cinematic shots, this value still hovers around 2000 nits, which can be considered an outstanding result. The coverage of the colour palette also deserves praise. The new second-generation Tandem OLED panel only brought a cosmetic change but still an improvement. The coverage of the DCI-P3 palette reaches nearly 99.5%, whereas for the ultra-wide BT.2020, it is around 84%. These are very good results, although it’s worth remembering one thing: at extremely high brightness levels, the colour volume will be lower than in Samsung Display’s QD-OLED panels due to the use of a white sub-pixel (WOLED). However, in everyday content and most films, catching this difference will be very difficult.

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000-nit mark, which on paper promises a solid HDR effect. In practice the screen really shows its teeth, although it can't fully spread its wings (or its backlight, if you will 🤔) in every condition. Bright, wide scenes make the best impression. Well-lit outdoor shots and brightly lit scenes look really good on it. Brightness then stays around 700 nits, which provides a noticeable step up in quality compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim these strongly, in order to protect black depth at all costs. On the one hand this gives better contrast, on the other... you lose dynamics and the brilliance of fine HDR detail. So the TV has considerable potential, but the dimming algorithm can be too restrictive.

Colour gamut coverage

When it comes to colours it's good as well. The QN80H uses quantum dot technology, and in our measurements it covered 93% of the DCI-P3 colour space and about 70% of BT.2020. Today those results aren't exactly jaw-dropping, but in real-world use they're more than sufficient to deliver a vivid, natural image for most films and TV series. Colours are suitably saturated, and after proper calibration they don't look artificial or overly aggressive.

We tested the LG G6 in the best factory mode in terms of colour fidelity, namely FILMMAKER MODE. In the case of our test unit, this mode was quite well tuned straight out of the box. In SDR content, the only issue we could point out was the white balance, which tended to drift towards warmer tones. Consequently, the image could occasionally appear slightly yellowed; however, overall, this was not an bothersome problem. The G6 performed a bit worse with HDR content. There, we noted too much blue component in the white balance, which caused the image to take on cooler hues, resulting in fairly noticeable errors. As can be seen in our ColorChecker chart, the colours indeed drifted towards these cooler registers. Nevertheless, considering the factory settings, the television displayed a perfectly decent level. We do know, however, that OLED screens – particularly those from LG – respond excellently to professional calibration, which is why we immediately went ahead with it.

The factory settings of the QN80H performed really well, especially compared with the majority of TVs we receive for testing. Of course, our measurements were taken in Filmmaker Mode, and that's the mode we recommend turning on immediately after the initial setup. For SDR material, our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to notice without measurement equipment. The only weaker point was the gamma. In the brighter parts of the image the TV brightened them a little too much, which at times made the picture lose some depth. Still, we'd like most TVs to look this good straight out of the box.

It fared a little worse in HDR. The white balance was still set correctly, so the problem was not with the colours but with the way the QN80H managed image brightness. This was immediately visible on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to clip. Interestingly, very small points were often dimmed too much at the same time. As a result, some fine details simply disappeared. So the factory Filmmaker mode in HDR is not bad, but it is definitely not as well calibrated as in SDR.

After professional calibration, we gained complete control over the panel, and we managed to align all parameters to nearly zero. We successfully calibrated the white balance perfectly, which eliminated the factory cool and warm tints from the screen. The effects are clear as day in the ColorChecker test – the average colour reproduction errors dropped below the critical value of 1-2. And what does that mean? PERFECT colours, without any distortion! However, as reviewers, we must point out here how the LG G6 arbitrarily manipulates brightness, for which the EOTF curve is responsible. When looking at the standard synthetic chart, it might seem that the line is quite straight. However, the situation changes when we turn on the measurement filter, which shows how the television interprets brightness in real, moving film scenes (EOTF in MOVIES). Then it becomes evident that some of the tiniest parts on the screen are slightly over-brightened by the algorithm. Of course, for the average viewer, such a deviation will be practically unnoticeable, but in the test of such an expensive screen, it is worth noting – especially since we are talking about a model that has huge aspirations to be named the best television of the year.

We saw the biggest difference after calibration in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we managed to get to grips with the way the QN80H handled brightness, as it had been over-brightening most scenes. After calibration the picture is calmer, more natural and much closer to how a faithful image should look.

Whatever one may say about the G6’s problems with near-black signal, it must be fairly acknowledged that it handles heavily compressed material and lower resolution content exceptionally well. All unwanted, unsightly tonal transitions are effectively reduced here by the "Smooth Gradation" feature. At the "Low" setting, the algorithm works flawlessly – effectively masking the artefacts resulting from strong compression without destroying the sharpness and details in the frame. Higher levels of this function do indeed smooth the image further, but they start to blur the real elements of object texture, which is why we recommend keeping this slider at a low setting. As for the upscaling to 4K, the processor does an excellent job – edge sharpness and detail reconstruction are at the highest level, and in this regard, the G6 does not fall behind the world leaders at all.

Digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we already know from the manufacturer's earlier models, and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without giving the impression the TV is aggressively trying to improve the source material.

The "Noise Reduction" function also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, particularly in low-bitrate streaming. However, it's important to remember that it does not work without side effects. It can remove some film grain and slightly smooth the image. So with a high-quality source we'd leave this function switched off. If, however, someone is more bothered by banding and uneven tonal transitions than by the loss of some grain, "Noise Reduction" can be a really useful addition.

LG G6 is an OLED television, so in the category of motion fluidity, it traditionally deserves the highest marks. The television supports very high refresh rates reaching up to 165 Hz in 4K resolution, but most importantly – on the screen, you will not notice any signs of blurring. The response time of the panel is almost instantaneous, ensuring that dynamic images remain perfectly sharp.

Motion handling and motion clarity on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach as much as 240 Hz. That's new for Samsung TVs and a useful addition for people who want to use the TV for PC gaming as well. We were more interested, however, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. Here it performs very well. The panel does not suffer greatly from the smearing typical of VA panels, and light trails behind moving objects are mainly visible on dark backgrounds. That said, it's nothing that would interfere with normal watching of sport or gaming. The TV also has a motion smoothing system that Samsung calls "Wyrazistością obrazu". You can adjust judder reduction and blur reduction separately, so it's easy to tailor its behaviour to films, sport or your own preferences.

The LG G6 is a true monster for gamers and one of the best-equipped televisions on the market in this regard. The manufacturer has not skimped on features, equipping this model with as many as four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This means that no matter which port you plug in your PlayStation 5, Xbox Series X, or powerful PC, you will get the absolute maximum performance from them.

The television supports a full set of gaming technologies: from VRR (Variable Refresh Rate) to AMD FreeSync Premium Pro, and even Nvidia G-Sync Compatible. On top of that, it offers remarkably low, nearly imperceptible input lag and an exceptionally well-functioning Game Optimizer panel, which allows you to monitor signal parameters in real time. Gaming on this screen, with the perfect black of OLED and impressive refresh rates, is pure pleasure.

The Samsung QN80H is a TV that stands out when it comes to gaming features. The biggest new addition for 2026 is DLG mode, which allows refresh rates of up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still heavily developing the gaming side of its TVs. However, the list of advantages doesn't end there. The QN80H has four full-fledged HDMI 2.1 ports, which is still not standard at this price point. So you can connect several consoles, a PC or a soundbar at the same time without having to wonder which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which may matter primarily to Xbox Series X owners. However, this is not a flaw that disqualifies the QN80H as a gaming TV. Samsung has a feature most manufacturers still lack: its proprietary motion smoothing, Game Motion Plus. It's a motion smoothing system that works in game mode too, allowing you to improve the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than the Dolby codec, especially in more demanding games that don't offer a 60 FPS mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H remains one of the best-equipped gaming TVs in its class.