LG OLED G4 vs XIAOMI A PRO 2025

LG G4 guarantees an incredibly vivid HDR effect, placing the television among the very best. The equipment of the highest model in the producer's 2024 portfolio with the second generation of micro-lens technology (MLA) has achieved a maximum brightness level of 1474 nits in real scenes. The only area where the product from the Korean manufacturer may lag behind LCD televisions with Mini LED backlighting is during the full-screen scenes featuring a lot of white. If we disregard the latter type of scene, the average result would be even higher. It is also worth mentioning scenes with very fine details, where each one shines at full intensity, which is not as evident in non-OLED televisions. The combination of such brightness and wide coverage of the DCI-P3 palette makes HDR materials more engaging than ever before.

In the HDR category, the television Xiaomi A Pro is, to put it plainly, lacking. Under ideal conditions, it offers brightness at around 250 nits. This is a poor result; however, in this price range, many competing models offer similar or lower values. Such brightness is too low to fully realise the potential of HDR content. In practice, this means that the image does not gain the appropriate depth and intensity expected from high-quality HDR. These values are more characteristic of standard dynamic range (SDR), which means that the true HDR effect remains beyond the reach of this model, and scenes that should stand out with spectacular brightness and contrast seem flat and lacklustre. However, for its price, the television offers good coverage of the DCI-P3 colour gamut at 92%, thanks to the use of quantum dot technology (specifically PFS LED). This results in vibrant and saturated colours, which will appeal particularly to gamers and film enthusiasts who appreciate richer shades and better colour reproduction compared to traditional televisions without this technology.

The best factory mode in terms of colour reproduction was "Filmmaker". This was the one we used during our tests. Let's check how its characteristics looked before the calibration process. Looking closely at the white balance first, we can notice a significant dominance of red and green. As a result, the image had a warm yellowish hue. Such characteristics are typically observed in "Cinema", "Filmmaker" or similarly named modes. The effect of this colour balance was clearly visible in both SDR and HDR content, which after switching from "Standard" mode appeared distinctly yellow. Now, let's move on to two graphs that are responsible for the brightness characteristics and consequently the contrast of the image. The first one (Gamma), representing materials with a standard colour palette, performed decently. For most of the time, midtones and bright whites were reproduced very accurately; however, it noticeably lost the darkest details, which merged into a black blob. Conversely, HDR materials, represented by the EOTF curve graph, exhibited a significant drop in contrast due to a strong boost in brightness. The colours themselves also posed a problem, as can be seen on the "ColorChecker" graph, since they were noticeably under-saturated.

The Xiaomi A Pro 2025 television has been tested in movie mode, which offers the best colour reproduction straight out of the box. However, it is worth noting that it is not free from flaws. Analysing the white balance, it can be observed that the values for green are in the negative. This phenomenon leads to some distortions in the shades of white, and with pure white, the graph shows clear deviations. The over-contrasted image results in inappropriate tonal transitions in red, negatively affecting the quality of colour display. Generally, in the image below, it can be seen that the overall scenery before calibration acquires pink hues. Additionally, when analysing gamma contrast, the graph is significantly below the 2.4 value, suggesting that the television overly emphasises dark tones, and the brighter areas of the image may be less vivid. Furthermore, the EOTF curve shows a strong peak at the beginning, which can lead to a loss of detail in bright scenes and an unpleasant feeling of over-drawing. These aspects indicate a need for further calibration to achieve a more balanced colour reproduction and improve the overall image quality. Users who expect precise colour reproduction may be forced to take measures to adjust the television settings to achieve more realistic and natural visual results. In the xiaomi tv a pro 2025, the factory colour settings in Xiaomi are average and may require calibration. After proper colour adjustment, the image gains a natural and vibrant colour palette, much closer to cinematic standards. It is worth adding that the issue of inaccurate colour reproduction is typical for many televisions in this class, meaning it is not a flaw unique to the Xiaomi A Pro 2025 TV. For those who value perfect colour reproduction, professional calibration will prove to be a key element that enhances the overall image quality.

The manufacturer has implemented extensive support for the calibration process in its LG televisions for many years. We therefore used 2- and 20-point greyscale adjustments, as well as an advanced CMS (Colour Management System), and got to work. As you can see, thanks to the procedure carried out, each parameter has significantly improved. The use of tools allowed for the achievement of extremely beneficial effects, which include: studio colour reproduction, recovery of details in dark areas of the image, appropriate brightness characteristics, and suitable colour saturation. This brings us as close as possible to the reference image, which is what the film director saw on the preview monitor. It is worth noting that the LG G4 televisions alone allow for even deeper intervention in image quality thanks to the ability to calibrate with 3D LUTs. However, this is a solution recommended only for post-production or graphic studios.

Now it's time to check how the Xiaomi A Pro 2025 television has performed after calibration. The biggest beneficiary of this process is the white balance. After the calibration was conducted, all previous errors were corrected in both HD and 4K content, and most errors no longer fall significantly outside the value of "2". This means a much more balanced and natural colour representation, which certainly affects the viewing comfort. In terms of gamma, the drop was significantly reduced, resulting in a more consistent tonal representation across various scenes. Nevertheless, the EOTF curve has not been significantly improved due to a lack of effective control over dynamic tone mapping. This limitation means that there are still some issues with detail reproduction in bright scenes, which may affect the perception of certain materials. However, despite these minor shortcomings, the overall shape of the image is definitely better after calibration. The television has gained in quality, and the improved white balance along with reduced gamma issues allows users to enjoy a more realistic and pleasant visual experience. Further adjustment of settings may enhance image quality even more, but even now the television demonstrates its capabilities, meeting the expectations of many users.

The tested television did not perform particularly well with materials rich in tonal transitions, as a result of which we could observe a strong posterisation effect. However, there is a partial remedy for this issue. The manufacturer has equipped the LG G4 with a smoothing system called "Gentle Gradation," which we can apply at three levels: Low, Medium, and High. Each of these options guarantees quite a high effectiveness of smoothing on light colours, although it is low on darker ones. We recommend primarily using the first one, as the other two interfere with the director's intentions by removing film grain.

When watching lower-quality materials, the efficiency of the television during upscaling is extremely important. The image from the tested television is sharp and clear. However, one should pay attention to the jagged edges of fine details and minor issues around characters, such as the creation of halo effects, which occurs due to the sharpening imposed by LG G4 even when the lowest value on the slider, that is 0, is set. It is worth noting that this represents a certain change compared to the LG G3, which did not impose such strong image sharpening, even when the appropriate slider was set to position 0.

How does the Xiaomi A Pro 2025 television cope with tonal transitions, especially with lower-quality materials? Thanks to advanced digital processing, the colour contour removal function works surprisingly well. We recommend setting this option to "Medium" – the television significantly improves the fluidity of tonal transitions while avoiding excessive smoothing of other image elements, such as film grain.

In the case of the tested image featuring a model and numerous branches in the background, the Xiaomi A Pro 2025 showcased its capabilities in terms of digital processing. Adding artificial sharpness to this scene made the details of the model more pronounced, and her hair appeared more detailed. However, delicate contours appeared around the branches in the background, which were a result of digital interference. Although this enhances the overall impression of detail, excessive sharpness can make some elements of the image seem unnaturally emphasised.

The maximum refresh rate that we can set on the LG G4 is 144 Hz. Naturally, this is only possible when the LG G4 is connected to a very powerful PC. Otherwise, we will operate at a maximum refresh rate of 120 Hz, which is recommended if we primarily want to watch sports or content with high motion dynamics. For those requiring high image fluidity, the manufacturer has implemented a multi-level motion smoother called "TrueMotion". This has been divided into two separate sliders that adjust the sharpness of moving images (De-Blur) and judder (De-Judder). Both sliders can be set in the range from 0 to 10, with each level affecting the degree of smoothness, allowing everyone to find their golden mean.

The LG OLED G4 panel features an average response time of 0.78 ms (as directly derived from our measurements), enabling an incredibly clear image, unattainable by LCD televisions, which can have response times of several milliseconds. This is perfectly illustrated by the images from the "UFO Test", which show no trailing blur behind the object. Moreover, the LG OLED G4 test revealed that the television offers the ability to precisely adjust the motion smoothing function, allowing users to select the ideal level of image interpolation. We particularly appreciated this during fast-paced actions in video games, where the LG G4 performed exceptionally well, minimising any blurring. Thanks to OLED technology, this model eliminates so-called ghosting, ensuring that the image remains sharp even in the most dynamic sporting or cinematic scenes.

Xiaomi A Pro 2025 offers a motion smoothing feature called "Motion Smoothing," which primarily works in films. It can be adjusted to prefer either a more cinematic, film-like effect with visible frames, or a smoother, theatre-like image. This function should satisfy those who intend to watch mainly films on it. However, gamers and sports fans may feel disappointed. The 60 Hz refresh rate panel, typical in this price range, does not impress. Our "Ufo" test revealed some motion blur. Those expecting better sharpness of moving objects may be slightly let down.

The LG G4 television supports all the features that make up the HDMI 2.1 standard. During testing, each of them activated without the slightest problem, which allows us to consider the television as designed for gaming. Their functionality will surely be appreciated by both console users and those connecting the LG G4 to a computer. It is also worth mentioning the correct implementation of the HGIG (HDR Gaming Interest Group) mode, which ensures that games mastered to brightness levels exceeding the maximum luminance of the LG G4 will correctly map tones, and the game's visuals will remain true to the original.

A nice touch is the existence of a special GameBar, which we can call up at any moment to check game parameters, but most importantly, to change them quickly. More importantly, enabling VRR technology does not degrade contrast, which is very common in televisions that feature local dimming or Mini LED backlighting. Of course, this is thanks to the OLED panel itself, characterised by pixel self-emission. As a matter of editorial obligation, we will only mention a slight grey flicker, which is somewhat normal after enabling VRR.

In summary, the LG G4, like practically all OLED televisions, is an ideal product for all kinds of games and online competitions. With fully-fledged HDMI 2.1 connections with a full bandwidth of 48 Gbit, features such as VRR, ALLM, G-Sync, FreeSync, or gaming in HDR Dolby Vision will bring much joy.

Xiaomi A Pro 2025 offers several features useful for gamers, including Game Bar, which is different from the typical "dashboards" with interfaces found in other manufacturers' products. Thanks to this, users can quickly access game-related settings, which is convenient during intense sessions. The TV also supports Automatic Low Latency Mode (ALLM), meaning it automatically switches to a mode optimised for gaming, reducing signal latency. Unfortunately, it lacks support for HDMI 2.1, limiting its capabilities for connecting the latest gaming consoles that may require higher bandwidth. Additionally, the TV does not support features such as VRR (Variable Refresh Rate) or G-Sync, which are increasingly desired by gamers, as they allow for smoother visuals and eliminate tearing. For these reasons, although Xiaomi A Pro 2025 has some features for gamers, in this price range, better options can be found that offer more advanced solutions dedicated to gamers.