LG NANO81A / NANO80A vs LG MRGB85B

If you are counting on HDR in the NANO81A to bring tears to your eyes, I must disappoint you. This television is simply too dark to truly show what this format is all about. With a brightness of only 250 nits, HDR exists here mainly on paper. In practice, during viewing, it is very difficult to distinguish whether we are watching high dynamic range content or regular SDR – it simply lacks that ‘punch’ of light in the bright parts of the image. However, to give credit where it’s due, we do have a glimmer of hope here – and quite a clear one at that. It concerns the colour gamut coverage. Here, the NanoCell filter shows that it is not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. This is a really solid result that places this model significantly higher than typical budget options based on standard white LEDs without any filters. Of course, it still falls short of the level of quantum dot (QLED) TVs or advanced panels with PFS filters, but for this price point, the colours are surprisingly saturated and vibrant. It's just a shame that this low brightness prevents them from fully ‘spreading their wings’ with the Nano filter.

LG MRGB85 offers moderate brightness. On test patterns it reaches about 700 nits, which by itself is a decent result. In actual movie scenes the values are lower and most often fall between 400 and 600 nits. Bright, expansive shots perform best. In scenes with a lot of black the TV noticeably limits luminance, trying to maintain the highest possible contrast. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Especially in darker parts of films the limitations of edge-lit backlighting and imprecise local dimming become noticeable again.

HDR Colors

A much stronger suit of the MRGB85 is its colors. The TV covers about 95% of the DCI-P3 color space and 74% of BT.2020, allowing HDR material to look vivid and striking. Colors are well saturated, and the difference compared with basic LCD TVs is clearly visible. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colors is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and yields more saturated red shades. This solution works well for color reproduction, but it does not change the limitations of dimming itself. The LEDs are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. Its aim is to display images as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left something to be desired. The main issue turned out to be the white balance. Measurements showed a distinct deficiency of blue colour, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white was not perfectly pure, which detracted from the freshness of the image. Additionally, brightness management was also not ideal – the factory-set gamma was too low. The picture often appeared oversaturated, as if overly lifted from the shadows, which caused it to lose naturalness and depth. Fortunately, LG, even in this relatively low price category, does not block access to advanced settings. The calibration possibilities of this model are enormous, which is a big plus for those who enjoy "digging" in the menu. We decided to approach the topic in our own way and see how much we could squeeze out of this panel with professional calibration.

We tested the TV in Filmmaker Mode, because among the available settings it offered the image closest to the reference. However, the out-of-the-box colour reproduction was not perfect. The largest deviations concerned the white balance, with the image showing too much red and not enough blue, which caused the whole picture to shift noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright parts of the image did not always look natural. It was not a fault that completely ruined the viewing experience, but in direct comparison with the same screen after calibration the difference was readily apparent.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools even in such an affordable model deserves a big plus. We managed to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "true". In SDR content (that is, regular television, YouTube, or older films), the picture now looks worlds better – it is clear, well-balanced, and no longer strains the eyes with strange hues. It is clear that this panel has significant potential, which is simply wasted by poor presets out of the box. However, we do have one serious reservation that calibration cannot fully overcome – it concerns brightness management in HDR mode. LG's algorithm in this model is constructed very conservatively. The television intentionally dims the HDR picture to avoid overexposing the already weak blacks of the IPS panel. The programmers faced a choice: either to provide more light and accept that the blacks would become light grey or to reduce the brightness to maintain any contrast. They chose the latter. Nevertheless, after our adjustments, watching anything on the NANO81 is significantly better.

Calibration primarily allowed us to correct the white balance and remove the previously noticeable warm tint. After adjustment the whites stopped leaning towards a yellow cast and the colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to reference. A similar effect was achieved in HDR. After calibration the image became more organised, although not all of the TV's limitations could be eliminated. The greatest reservations still concerned intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, whereas in more demanding HDR material its limitations remain clearly visible.

It often happens that cheap 4K panels mercilessly bring to light all the "dirt" and imperfections of lower-resolution content. However, with the LG NANO81A, the situation is quite different. This is truly a solid performer when it comes to handling content that is far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A significant advantage is the gradation reduction feature that you will find in the settings. It is extraordinarily effective in combating colour banding, which is a lifesaver when watching materials with a low bitrate, for instance, from some streaming services or older files from the web. However, it is worth maintaining a certain level of caution. Since we are dealing with a less powerful chip than in LG's top models, setting this option too aggressively may sometimes result in minor artefacts or slight blurring of details. Despite this risk, I definitely encourage experimenting with this feature - in many cases, it can save the viewing experience and make low-quality material fully watchable.

Upscaling and digital image processing perform quite well on the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution content, and regardless of source you can also easily disable overscan. The TV also copes well with compression artefacts. The "Smooth Gradation" feature can effectively reduce visible banding and tonal unevenness, but it is not always precise. At higher settings it can also smooth out fine details, for example surface textures. On the plus side, it does not remove film grain. It's safest to use the "Low" or "Medium" setting, which gives the best compromise between artefact reduction and preserving detail.

When it comes to motion fluidity, the NANO81A unfortunately has a hard time. The television is based on a panel with a refresh rate of 60 Hz. If you are looking for perfect sharpness in dynamic football matches or fast action games, you may feel a bit disappointed. With such a low native refresh rate, fast objects on the screen will always be a little blurred.

The LG MRGB85 is equipped with a VA panel with a native 144 Hz refresh rate, so it performs very well in terms of motion handling. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera movement is noticeably smoother than on basic models with 60 Hz panels. We also have TruMotion, which lets you set the level of motion smoothing yourself. You can keep a more cinematic feel to motion or increase smoothness, which works well for sports broadcasts and TV programmes. The adjustment range is wide, so you can easily tailor the smoothing to your own preferences.

NANO81A is unfortunately not hardware designed for e-sports. The lack of support for a 120 Hz signal is a fact that users planning to purchase this model simply have to come to terms with. Nevertheless, LG's engineers have made an effort to maximise the potential of this 60 Hz panel, offering a set of features that genuinely enhance the gaming experience. Firstly, the television supports VRR technology (within the range of 48-60 Hz) and ALLM. As a result, the image remains stable and does not "tear", and the device automatically switches to low-latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay, which allows for quick viewing of parameters without leaving the game. A very significant advantage is the support for the HGiG format. This solution is crucial for owners of modern consoles because it enables the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer didn't skimp on features and has essentially brought the full suite of functions from pricier TVs to this model. You get three HDMI 2.1 ports with the full 48 Gbit/s bandwidth. Each supports 4K at 120 Hz from a console, and when connected to a PC also 4K at 144 Hz. So you don't need to worry which port to plug your console or PC into, because they all offer the same capabilities. Also on board are VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. There's also Dolby Vision Gaming, which means in supported games you can use high refresh rates and dynamic HDR simultaneously on Xbox. The package is rounded off by Game Optimizer, a handy in-game menu for gamers. Without leaving the game you can change the picture profile, brighten shadow details or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as much more expensive LG models.