LG 55 B4 vs Samsung S85H

The brightness results in HDR materials for LG B4 are very good. It is true that none of them exceed 1000 nits, although the stability of luminance is excellent and looks practically the same in every scenario. The only moment where the tested television performs worse is the last of the scenes, although this should not be surprising. Large frames filled with a lot of white have always been, and probably will continue to be, somewhat of a weakness for OLED televisions. However, the combination of perfect contrast, black levels, and brightness of LG B4 allows for a full experience of the HDR effect. Additionally, the incredibly high coverage of the DCI-P3 colour gamut deserves recognition, reaching 99%. This makes the colours look incredibly vivid and striking.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 series. In the same movie scenes last year's model stayed closer to around 700 nits, while the S85H can reach roughly 800 nits. This isn't a change that completely transforms HDR perception, but that extra brightness is noticeable, especially with pinpoint highlights, specular reflections and stronger special effects. Around 800 nits is already a very good result for an entry-level OLED and in most films it's enough for HDR to have the proper impact. Bright elements can stand out clearly against perfect black, and it's still that contrast that does most of the work. You do need to bear in mind a typical limitation of organic panel technology. When a very bright scene covers a large part of the screen, brightness can drop by almost half. That's the effect of the panel's protection mechanisms, which limit its power with large bright areas.

Colours

The S85H can deliver very pleasing, saturated colours and in most HDR films it looks really good in that respect. We measured around 95% DCI-P3 coverage, so the palette most commonly used in movies is reproduced to a very high degree. Skin tones, greens and stronger reds still have the right intensity, and in normal viewing it's hard to fault them. Only when you look wider at BT.2020 do the limitations of the new OLED SE panel become apparent. Coverage was about 70%, a little less than previous-generation WOLEDs and noticeably less than QD-OLED panels. In films this is not a big loss, because most productions rarely use such highly saturated colours. You're more likely to notice it in games, where creators often opt for more intense colours.

The best factory mode prepared by the manufacturer is "Filmmaker," which is exactly what we used throughout the entire testing procedure. We must admit that the unit we received out of the box had quite good colour reproduction. The biggest problem in both SDR and HDR content turned out to be white balance. In the former, a strong red hue was evident, causing the displayed image to have a pronounced yellow tint, particularly noticeable on skin tones and whites. In higher quality materials, this colour was also accentuated, but due to a lack of blue, there were also signs of green visible. Apart from these issues, we also encountered problems with grayscale and the colours themselves.

For colour evaluation we naturally chose Filmmaker mode, and in SDR our S85H sample was very well set up from the factory. The largest deviation is in the white balance, where, as brightness rises, there is a slight lack of blue. In practice this means whites and greys have a subtly warmer tint than they should. However, this is not a major fault and during normal viewing it is unlikely to be very noticeable. Gamma also stays close to the reference value, so the image is neither overly bright nor unnecessarily dim. The S85H’s SDR picture quality is therefore very good straight out of the box. A few more imperfections appear in HDR. Here the white balance drifts more with increasing brightness, blue starts to dominate and the red component is clearly lacking. This also translates into larger errors for some colours. They do not yet amount to shifts that completely change the character of the image, but in direct comparison with a reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

LG B4 has been providing very advanced calibration tools in its televisions for years. We can even say that as the only manufacturer on the market, it allows for such deep intervention in image adjustment. It is thanks to these tools that we were able to calibrate the device so well. Evidence of this is the extremely low deltaE errors, which can be said to be at a reference level. Both SDR and HDR materials now look exactly as intended by the film director. It is no coincidence that televisions of this brand are most often used as preview screens for various graphic or post-production studios.

Calibration yields very good results on the S85H. First and foremost, it was possible to set the white balance almost perfectly, which removes the slightly too warm character of the image that was previously visible in SDR. Colour reproduction itself also improves markedly, with most errors falling to a very low level and in everyday viewing it is hard to speak of any noticeable inaccuracies. You can also make significant improvements in HDR, although some issues remain due to the TV's inherent characteristics. The S85H does not always hold the brightness curve perfectly; the darkest parts are slightly lifted, and as you approach the panel's limits small deviations are visible in the brightest areas. Added to this is the limited coverage of the wider BT.2020 gamut, which of course cannot be overcome by any calibration. Despite this, the end result is very good and, after calibration, the S85H can produce a really well-tuned, natural image.

In this paragraph, we will take another look at the function for smoothing tonal transitions, but we will also check how the television handles lower quality material. As we have managed to verify, the setting responsible for smooth gradation works quite efficiently, although it has its weaker moments. Just as the function works correctly in SDR content, it becomes rather useless in HDR content. Even at the lowest of the options, it blurs essential details, which is why we advise against using it.

The image scaling on LG B4 is rated rather moderately positively. Although there is no edge doubling, the image itself is naturally "soft." We can change this by adjusting the sharpness slider.

Samsung has fitted the S85H with the same proprietary AI NQ4 Gen2 processor used in last year’s S85F and, in terms of digital image processing, it performs quite well. Upscaling is one of the model’s stronger points. Lower-resolution material is well sharpened, edges look natural, and the picture does not feel overly artificial. One caveat is a typical Samsung trait: at very low resolutions you cannot completely disable overscan, so the TV may slightly crop the left edge of the image. The "noise reduction" function also works very well, smoothing weaker tonal transitions. The processor can effectively remove posterisation and other imperfections visible in lower-quality material. However, you need to be careful with the strength of this function, because Samsung can be quite aggressive here. When it is activated, small image details, such as the texture of skin or clothing, can start to disappear along with the unwanted artefacts.

The maximum refresh rate that we can set on the LG B4 is 120 Hz. This is the absolute minimum for those requiring high image fluidity. The manufacturer has implemented a multi-step motion smoother called "TruMotion". It has been divided into two separate sliders adjusting the sharpness of moving images (De-Blur) and jitter (De-Judder). Both sliders can be set in the range from 0 to 10, with each degree affecting the level of fluidity, so everyone can find their golden mean.

The LG OLED B4 panel features an average response time of 0.1 ms (which directly results from our measurements), allowing for an incredibly clear image, unattainable for LCD televisions, whose response times can be as high as several milliseconds. This is clearly evident in the pictures from the "UFO Test", showing no trail following the object.

The S85H uses an OLED panel, so it performs excellently for motion blur. Pixels respond virtually instantly, so moving objects do not leave the characteristic trailing seen on some LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during rapid motion. The panel itself runs at 120 Hz. That is more than sufficient for films, TV series, sport and console gaming. It is a pity Samsung did not include a higher refresh rate aimed at PC gamers, as more and more TVs now offer 144 or even 165 Hz at 4K. However, that does not affect motion handling in films or sport.

You also have a classic motion-smoothing feature with two settings, blur reduction and judder reduction. So you can decide whether films should retain their cinematic 24 frames per second or whether you prefer to smooth them a little. The S85H gives plenty of freedom here, and the interpolation works well and, with sensible settings, does not generate too many artefacts.

The LG B4 television is equipped with four fully-fledged HDMI 2.1 ports with a full bandwidth of 48Gbps. All features that are identical to this standard were activated without any issues, and throughout the entire testing process, they did not cause any problems. The combination of such extensive functionality and low input lag suggests that the tested television is truly made for gaming. This is not surprising, considering that the manufacturer has always placed great emphasis on this. Therefore, we can enjoy both the properly implemented HGIG mode and gaming in Dolby Vision with low latency. This pairing will certainly attract the attention of all passionate gamers for whom quality is paramount.

An additional standard in televisions from this Korean manufacturer is the implementation of GameBar, allowing for quick adjustment of settings "on the fly," without the need to exit the game. It also enables image adjustments for individuals with visual impairments, which is a very nice touch. Another important piece of information is that when VRR technology is enabled, we will not experience a drop in contrast. This is thanks to the construction of the panel and the lack of conventional backlighting. However, it is normal for shades of grey to flicker slightly; nevertheless, this is a characteristic feature of this function regardless of the manufacturer or television.

In summary: the LG B4, like all of the manufacturer’s OLEDs equipped with 120Hz panels and HDMI 2.1 ports, creates a harmonious whole with the console. In practice, this is a comprehensive television, and if we expect the highest possible efficiency in gaming, B4 will be the ideal choice.

The Samsung S85H is very well prepared for gaming, essentially regardless of whether you connect a console or a PC. The manufacturer hasn't skimped on ports and all four HDMI ports support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR and ALLM without worrying which input your console is plugged into. With multiple devices that matters a lot, because you don't have to choose between a console, a PC or a soundbar connected via eARC. The feature set itself is very comprehensive. The S85H supports VRR, FreeSync and automatic game mode switching, and Samsung also offers its extensive Game Bar where you can quickly check key signal parameters and change settings without leaving the game. The only notable omission is Dolby Vision, which will matter mainly to Xbox owners. This, incidentally, is typical of Samsung TVs. Game Motion Plus performs very well, and it's one of the features that have set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as much increase in input lag as a conventional motion interpolator. In practice, with slower-paced games, racing titles or action games this can really improve the perceived motion, especially if you're sensitive to low frame rates.