Hisense U8Q vs Samsung S90H (WOLED)

When it comes to HDR, the Hisense U8Q shows its claws. On paper, that is, in synthetic measurement tests, the television can achieve nearly 4000 nits of peak brightness. This is a value that most models can only envy. In practice, this translates to very strong light effects in films – in some scenes, we managed to measure a real brightness of between 1500 and 2000 nits, which is a level typically reserved for the absolute top tier of televisions on the market.

Of course, it's not always perfect. In small, pinpoint elements, brightness can drop – a good example is scene number 4 from the film Sicario 2, where instead of thousands of nits, we get around 500. But it’s worth noting that the effect does not disappear completely – the light is still visible, and the image does not seem artificially dimmed. This is a typical issue with Mini LEDs, so it's difficult to consider this a major downside.

On the other hand, the colour reproduction is a huge plus. Thanks to additional coatings that enhance colour saturation, the U8Q nearly covers the entire DCI-P3 colour space (98%), and for the wider BT.2020 range, it achieved over 80%. This is an excellent result that makes HDR films look rich, vivid, and simply very cinematic.

Samsung S90H in the WOLED variant is still an exceptionally bright TV for its price bracket, although compared with the QD-OLED version it is slightly dimmer. The difference is not as significant as in last year’s F series, where the gap could reach as much as 500 nits. Here the parameters of both panels are very similar, and differences in peak brightness are only in the order of 100–150 nits. In small-area measurements the S90H on the WOLED panel easily reaches levels close to 1500 nits. Such a reserve of power allows HDR dynamics to be reproduced phenomenally; all highlights, light reflections and explosions have the necessary punch, exactly as the creators intended in the editing studio. As with most OLED displays, when a very bright scene fills the whole screen protection systems activate and brightness naturally falls to around 700 nits. It is worth emphasising that this is still an excellent result on the market. Often noticeably better than many Mini LED screens in the same segment.

Colour gamut coverage

The biggest difference between the two S90H variants lies in colour reproduction and saturation. This results directly from the different construction of the WOLED panel, which uses an additional white subpixel. As a consequence, colours at very high brightness do not reach the same intense saturation, and the volume of the wide gamut is somewhat more limited than in QD-OLED. That does not change the fact that in everyday use these differences will be hard for most viewers to spot. The DCI-P3 space we measured reaches nearly 99% on the WOLED panel, which means that in the vast majority of real film scenes both variants will present an almost identical picture. The true distance only reveals itself in rarer, exceptionally demanding productions that use the ultra-wide BT.2020 gamut. Due to the specifics of the WOLED panel’s construction, coverage of that standard is about 15% lower compared with the S90HAT with a QD-OLED panel, so the brightest, heavily lit colours in HDR may appear slightly less vivid.

We must admit that when the U8Q arrived at our editorial office, we were slightly surprised… and positively so. Usually, in televisions, the white balance immediately requires adjustment – it can be too warm or too cold, which immediately leads to strange colour mistakes. Meanwhile, here the situation looks really good straight out of the box. Of course, we are talking about our unit, so there is no guarantee that every model will be equally well calibrated, but in our case, the first impressions were very positive. The only more apparent issue concerned the way the television manages brightness. Looking at the EOTF graph, it is clear that the U8Q tends to brighten small elements on the screen. This, in turn, caused what we mentioned earlier – slight overexposure and the impression that the entire scene can be a bit too bright. However, this is not a flaw that undermines the picture, rather an effect characteristic of this model.

In Filmmaker mode, which we strongly recommend switching on straight out of the box, the S90H offers very good factory colour tuning. Colours are natural and faithful to the creators' intent, without the irritating oversaturation found in more aggressive presets. However, as is often the case without full calibration, no two units are identical. In our test the white balance was slightly lacking in blue, causing the image to lean a little towards warmer, yellowish tones. This was most noticeable in bright scenes, such as the snowy sequences from Star Wars. Additionally, the gamma curve was slightly low at 2.2, which produced a minor lift in shadow detail. In HDR mode the tuning was somewhat better, showing only a slight undersaturation in the red region.

Of course, we wouldn’t be ourselves if we didn’t make adjustments to the white balance. After calibration, we managed to equalise the SDR signal to practically perfection – older films, YouTube content, and classic television looked almost ideal on the U8Q. This is truly an exceptional level that shows this model can do a lot if given a bit of help. Unfortunately, the situation is different with HDR content. The colours themselves don’t pose many problems, but the U8Q’s biggest issue remains the EOTF brightness characteristics. In practice, the television tends to “over-expose” beyond how the image should look in its original form. It’s that slight "bleeding" that we noticed earlier in comparisons with the best screens on the market. It’s a bit of a shame that this characteristic can’t be fully tamed – if we could maintain equally good control over brightness in HDR as in SDR, we would be dealing with an absolutely reference-quality image.

After a full calibration it’s fair to say the S90H in WOLED guise looks almost perfect. In SDR mode colour inaccuracies drop to ultra-low levels and Delta E values very rarely exceed 2. That’s a phenomenal result, so if you care about perfectly faithful colour reproduction it’s definitely worth considering calibration. The calibrated HDR mode also performs very well, with the white balance stabilised and earlier deviations eliminated. After professional fine-tuning it’s really hard to find anything to criticise, because the TV delivers an image with almost reference-level naturalness and three-dimensionality. The slightly lower score in this category compared with the QD-OLED variant is solely due to the aforementioned limitation in saturation in extremely bright scenes; the tuning options and colour fidelity themselves are at the highest level.

Hisense U8Q handles lower quality materials quite well. The television can smooth out tonal transitions thanks to the "Smooth and Gradient Picture" feature – it works best when set to Medium. At this setting, it nicely dims unwanted bands and unevenness in the picture, but importantly, it does not remove the film grain or fine details.

The upscaling itself is also at a good level. Images from lower resolutions appear smooth and soft, sometimes even overly so – we get a plastic effect that may not appeal to everyone. Fortunately, this can be easily corrected with the sharpness slider, allowing the picture to be adjusted to personal preferences.

In terms of posterisation reduction itself, Samsung has kept the solutions known from last year’s models. The dedicated gradient-smoothing function performs quite well and can effectively mask unwanted tonal banding, which is useful on a WOLED panel that is slightly more prone to banding. However, you should be aware of its aggressive behaviour. This mechanism, alongside the artefacts themselves, can clean up fine film grain and gently soften detail. Ultimately it is a matter of compromise, but if you want an absolutely faithful reproduction, it is safer to leave this option off.

Similarly, in the area of scaling it is difficult to call this a breakthrough. The S90H uses the same NQ4 Gen3 processor as its predecessor, so the upscaling quality was almost identical. The chip sharpens lower-resolution material very well, extracting a satisfying level of detail. Samsung still has not dealt with the longstanding overscan issue, though. With some older recordings or archive footage the edges of the image can be slightly cropped. It’s a minor flaw, but it’s a pity the manufacturer still hasn’t eliminated it.

Hisense U8Q features a panel that can refresh the image up to 165 Hz in 4K resolution. In practice, this will primarily be utilised by PC gamers, but as the saying goes – it’s better to have it than not 😊. For films and series, we have a built-in smoothness enhancer called Ultra Motion Smoothness. In the settings, it can be easily adjusted to suit personal preferences – whether we want a more “cinematic” frame rate or a smooth, theatrical spectacle.

In terms of motion handling, the S90H is simply excellent. This year's panel offers a boosted refresh rate of up to 165 Hz, though in practice the benefit will mainly be for gamers connecting a high-end PC. For films, series or sports broadcasts such a high refresh rate makes no difference and the picture looks exactly the same as at the standard 120 Hz. Regardless of the source, however, the OLED panel's lightning-fast response time does its job, so motion is clean and the ghosting or smearing familiar from LCD screens simply does not occur here.

In terms of features, the Hisense U8Q has practically everything one could expect from a modern gaming television. Thanks to the new processor, the manufacturer managed to implement as many as three HDMI 2.1 ports, so there is no problem connecting several consoles or a computer. On top of that, it includes all the key technologies – Game Bar with parameter preview, variable refresh rate (VRR), automatic low latency mode (ALLM)… in a word, a complete set.

But as is often the case with Hisense, it fell a bit short of perfection. The biggest drawback remains the lack of support for the HGiG format, which allows the brightness of the television to be adjusted to the console and maximises HDR in games. It’s a shame, because if this element were included, we would have a device practically made for gamers. As it stands, the U8Q remains “only” a very good choice 😉

Players should feel at home with the S90H, because Samsung has left few reasons to complain in that respect. The TV has four HDMI 2.1 ports, each of which supports VRR, ALLM and high refresh rates. There’s also the Game Bar, a handy menu that lets you quickly check key parameters and change settings without leaving the game. Importantly, Samsung has also improved HGiG mode. In last year’s models it could cause problems when used with a console, but on the S90H it now works as it should. What really stands out against the competition is the Game Motion Plus feature. It’s a special motion smoothing mode for games that works best with titles running at 30 or 60 fps. Motion becomes noticeably smoother, while latency remains at a reasonable level. In our measurements it was under 50 ms, so gaming is still comfortable. That’s important, because on many TVs enabling a similar smoothing feature causes such a large increase in input lag that controls become noticeably sluggish. Samsung has managed to find a good compromise here. There’s still no Dolby Vision Gaming, but in practice Game Motion Plus may prove to be a much more useful feature.