Hisense U7NQ vs Haier Q80FUX

The Hisense U7NQ 65 television showed considerable potential on the luminance chart, exceeding the 1000 nits barrier and easily achieving very high brightness results in the first, third, and fifth test scenes. However, as before, in the second and fourth test scenes, such as from the film Sicario 2, there are significant issues with maintaining brightness, and results around 200 nits are very disappointing. Despite a large number of dimming zones, the algorithm in the television responsible for controlling these zones fails to respond adequately — in this case, it significantly dims small elements such as the moon or the light from a helicopter. The bright light that should dazzle us is too dim to be considered HDR effect. Nevertheless, it is worth praising the television for its high coverage of the DCI-P3 colour gamut at 96%, which allows it to represent most film scenes well.

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

The Chinese manufacturer offers various picture settings in its televisions, but the best mode in this model is undoubtedly Filmmaker Mode. Despite its name, this mode has its issues: white balance, although roughly correct, is characterised by a strong dominance of warm tones due to the oversaturation of red, both in 4K and HD content. The Colour Checker test confirms these errors — deviations of samples towards inappropriate hues are visible. As for brightness characteristics, the gamma responsible for HD content shows values below 2.4, leading to some brightening of the screen. Meanwhile, the EOTF curve reveals the television's struggles with displaying small bright elements, as confirmed by the previously described paragraphs.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

Hisense televisions offer many image correction tools that allow users to adjust settings to their own preferences, which is why we decided to take advantage of these capabilities to bring the image quality closer to a reference standard. In terms of white balance, we were able to eliminate the dominance of the red colour, resulting in more neutral hues, which allowed for a more realistic image in both 4K and HD materials. We observed similar improvements in brightness characteristics. The gamma, which previously led to excessive screen brightness, was corrected, contributing to better detail reproduction in the darker areas of the image while maintaining a natural tonal balance.

However, the biggest challenge was calibrating the EOTF curve, which corresponds to brightness in 4K materials. At first glance, the EOTF value appeared nearly perfect, but detailed tests showed somewhat different results. When we examined it more closely — especially using the filter on the right side of the EOTF chart — we noticed how the television manipulated 4K film materials, often significantly boosting brightness. This effect was particularly noticeable in scenes from films such as Pan and Billy Lynn, where the television attempted to artificially increase the brightness of elements, affecting their naturalness. Despite these imperfections, the calibration yielded positive results, especially in terms of tonal improvement. For most users, the final effect should be satisfactory, particularly if they are keen on bringing the image quality closer to professional reference standards.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

When it comes to smoothing tonal transitions, despite the presence of the "Smooth and Gradient Image" function in the test sequence, we did not notice that the function made any difference — we recommend turning it off. As for upscaling, the television handled our model reasonably well, and the branches in the background are not overly jagged — the image appears quite plastic. However, it was slightly cropped by the so-called overscan.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

Hisense U7NQ has a refresh rate of 144 Hz, which definitely contributes to smooth movement. For film enthusiasts, two functions are available: judder reduction and motion blur reduction. The judder reduction function minimises the effect known as judder, or unpleasant jumps in the image, particularly noticeable at lower frame rates. Meanwhile, motion blur reduction helps to sharpen fast-moving objects, which is useful when watching dynamic action scenes.

As for ghosting, the television has a good response time, meaning excessive ghosting is not visible, except in specific situations, such as the test with the little green man on a dark background. In such cases, slight artefacts may appear, but overall the television handles dynamic images well, providing satisfactory motion quality.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

Hisense U7NQ offers everything a gamer might need for comfortable gameplay. The television supports a refresh rate of 144 Hz, providing an incredibly smooth image, especially in dynamic action games. The VRR (variable refresh rate) feature ensures that the image adapts to varying frames per second, eliminating stuttering and screen tearing. Additionally, there is an ALLM (automatic low latency mode) feature, which automatically switches the television to game mode, minimising input lag.

The television also supports Dolby Vision, which is particularly important for gamers who appreciate high contrast and rich colours in games that support this format. The Hisense U7NQ also has a Game Bar feature that allows quick access to the most important settings during gameplay, as well as support for G-Sync technology, further reducing screen tearing effects.

Unfortunately, despite a wide range of features, it lacks support for the most popular HDR format in gaming — HGiG. This may be disappointing for gamers who expect optimal detail reproduction in HDR scenes. Nevertheless, the other features make the Hisense U7NQ a solid choice for any console gaming enthusiast.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.