Hisense S7NQ CanvasTV vs Hisense UR8S

When it comes to the brightness of the television and how it handles bright elements while watching films, it is simply average – similar to the case with contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows one to feel the beginnings of true HDR, but it is definitely too little to speak of remarkable effects. However, the television should be praised for its colour gamut coverage – films look very colourful and vibrant. Thanks to the use of PFS LED (QLED) coating, the device is capable of covering over 90% of the DCI-P3 colour palette and over 72% of the wider BT.2020 palette. For a television of this class – these are really very good results.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern peak brightness reached around 2200 nits. That’s a very good result, but as always what’s much more important is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes, where there’s a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has plenty of punch. It’s worse with small bright elements on a dark background. The TV clearly dims them to keep good blacks and to prevent excessive bloom. As a result things like single stars or tiny reflections can be only around 200 nits. And here HDR is no longer as impressive. So you can see that the local dimming algorithm works effectively, but it also has its cost: sometimes it simply sacrifices the brightness of small details in favour of contrast.

Colours

With RGB Mini-LED TVs colours should be judged a little differently than usual. If we look solely at the panel’s native capabilities, the UR8S performs excellently. We measured around 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs and this is where the potential of the RGB backlight is most obvious. The problem is that this potential is not always realised in real scenes. When we ran the same measurements on test patterns with a film background applied, saturation of some colours began to fall noticeably. Individual zones are not always able to control the three RGB components so precisely when the scene becomes more complex. This is most visible with blue and magenta. On simple test patterns they can look very strong, but in more demanding scenes samples of those colours visibly shrink. So the UR8S’s capabilities are enormous, it’s just that the TV cannot fully make use of them in every scene.

Let's now check how the Hisense S7NQ CanvasTV performs in colour reproduction in the best factory mode, which is Filmmaker. Right from the start, it is clear that it is decidedly better than in dynamic or standard modes, but there are still a few things to nitpick. Regarding image quality from an HD signal, the colours are slightly inaccurate – there is a dominance of cooler shades of blue and a lack of red. This makes the image appear somewhat too cool.

A similar effect can also be observed with 4K content, but there it is much more noticeable. The excessive exposure of blue tones and the lack of red result in the image appearing distinctly cold. However, the biggest problem with this television is not the colours themselves but the way brightness is managed. The tested unit slightly boosted brightness compared to the reference value. While this results in better visibility of details, it comes at the cost of significantly brightened blacks – causing the entire image to seem more "flat".

A similar phenomenon was noticed in the 4K signal – the slightly elevated curve at the beginning of the EOTF chart shows that the television has a tendency to overexpose certain scenes. Fortunately, this effect can be improved with professional calibration, which we will discuss in the next point.

For assessing the out-of-the-box colours we used Filmmaker mode, which is intended to show an image that is as close as possible to how the material was prepared. Looking at the white balance alone, the UR8S performs quite well. There is no strong tint that immediately jumps out, although as brightness increases a little too much blue and red start to appear, with a simultaneous shortfall of green. Colour errors therefore show up in measurements, but the image itself does not look bad. We have far greater reservations about how the UR8S manages picture brightness. In SDR the gamma sits around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the picture is too bright, especially in the midtones. Shadows are lifted too much, causing the image to lose some depth. A similar tendency is visible in HDR. The EOTF curve is above the reference value for a large part of its range, so the UR8S again brightens the image more than it should. This is not due to a lack of brightness — the TV has plenty — but to the way it manages that brightness. As a result, HDR content can look very striking, but not always precisely as it should.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we managed to eliminate the excessive exposure of blue tones and deficiencies in red with HD signal. A similar, albeit slightly weaker effect was also achieved with 4K HDR content. Managing brightness in HD material has also been improved – the television no longer has issues with brightening the image "across the board."

However, there are things that cannot be bypassed. The characteristic of the EOTF curve has practically not changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. One simply has to come to terms with this when choosing a television with a similar type of backlighting. Despite this, the final effect is very good and should fully satisfy the vast majority of users.

Hisense provides plenty of calibration options and, in SDR, these can yield a very good result. After calibration, the white balance is practically even across the entire range, and colour errors fall to very low values. The UR8S can be adjusted very precisely here. HDR is somewhat different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations begin to appear. The most interesting aspect, however, is the behaviour of the EOTF curve. Even after it has been correctly set on test patterns, the UR8S still tends to interpret brightness in its own way when watching films. Depending on the scene, parts of the image are slightly brightened while others are dimmed relative to how they should appear. This shows that the algorithms controlling the local dimming have a significant influence on the final image. Calibration therefore allows colours to be improved very effectively, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

Equally important is how the television handles tonal transitions on a poor signal – for example, in older films, television, or on YouTube. Unfortunately, despite the presence of the "Smooth and Gradient Picture" feature, which was supposedly meant to improve this aspect, its performance is truly poor. It's barely noticeable that it has any real impact on the visibility of colour transitions.

The image scaling is also lacking. Yes, it can be observed that the television tries to "enhance" the quality, but the end result is far from ideal. The image often appears slightly jagged, which is particularly noticeable in the example of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, causing subtitles in news items or finer details in the image to be missed.

A big plus of the UR8S is the use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model's stronger points. The TV handles smoothing tonal transitions very well, especially with lower-quality content. The feature responsible for this effect works effectively without overprocessing the picture. Even on the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image is not overly sharpened. The UR8S simply copes very well with a weaker signal, and in this respect it is one of its most notable strengths.

When it comes to motion fluidity, the television performs remarkably well. Although the S7NQ was designed primarily for displaying static elements – such as images – the manufacturer has implemented a 144 Hz refresh rate matrix. As a result, sports and games look really good on it.

For materials that are not recorded at a high frame rate, the manufacturer has provided two features that allow you to adjust the picture to your own preferences. "Motion blur reduction" and "judder reduction" operate on a 10-point scale, allowing you to choose between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a "soap opera". How to set this up? That’s a personal matter – we leave the decision to you.

The UR8S is equipped with a panel with a native 180 Hz refresh rate, so right from the start it offers excellent motion handling. The panel itself performs really well here, although some limitations typical of VA panels are still visible. Motion blur is relatively minor for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

Although the S7NQ is a "picture" type television, it can indeed be used for gaming. Really. Here you can find almost everything (except for the HGiG mode) that a modern gaming television needs. The 144 Hz panel and two full-fledged HDMI 2.1 ports allow for the hassle-free connection of two consoles, such as the PlayStation 5 or Xbox Series X/S.

The television supports Automatic Low Latency Mode (ALLM) and Variable Refresh Rate (VRR), with no stuttering or issues. It also handles displaying high frame rates at lower resolutions without any trouble. Hisense deserves praise for a very attractive Game Bar – it displays all available picture options, and additionally, we have the ability to enlarge the minimap or turn on the crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of a proper implementation of the HGiG mode. It is specifically responsible for automatically adjusting the picture in games as the creators intended. It's a shame, because that’s the only thing preventing the Hisense S7NQ from being a full-fledged gaming "beast".

In terms of gamer features the UR8S performs really well. The TV supports practically everything you can expect from a modern console or PC display. It offers ALLM, VRR and 4K at 120 Hz. There is also Dolby Vision in Game Mode, so when using, for example, the Xbox Series X you do not have to give up that HDR format. PC gamers get even more options. The panel can run at 4K at 180 Hz, and dropping to Full HD can raise the refresh rate to as much as 330 Hz. There is also a Game Bar that lets you quickly check key information and change gaming-related settings. The only clear omission is a correct implementation of HGiG. With it enabled the TV still alters HDR brightness mapping, so we do not get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.