Hisense E8Q vs Sony Bravia 3 50' (VA)

Since the E8Q is a twin of the U7Q, it’s no surprise that the quality of the HDR effect is nearly identical. On paper, it looks promising – a peak brightness of 800 nits can impress in many scenes. Moments such as flashes of light in “The Meg” or shots of the sun in “Life of Pi” can indeed evoke a 'wow' effect. But the longer we watch, the more we notice the limitations. The problem arises when small, bright details need to be shown against a dark background. In such situations, the dimming algorithms try to preserve contrast but end up dimming what should shine the most. Instead of dazzling details, we get almost invisible points of light. This is typical for Mini-LEDs in this price segment and is not surprising – but it’s worth knowing that the HDR effect will not always be fully preserved. Fortunately, the colour performance offers reasons to be pleased. Coverage of the DCI-P3 colour gamut at around 94% is a very good result, and the applied layer of quantum dots (more precisely, PFS) does its job – the colours are saturated and vibrant, especially with 4K content.

Interestingly, the 50-inch version of the Bravia 3 performs slightly better in terms of brightness than its larger variants. In measurements, it achieved around 370 nits, which still does not compete with top-tier televisions, but is sufficient to suggest a semblance of HDR effect. For some users, this level will be acceptable, while others will view it as typical for SDR content, where striking highlights or strong contrasts are not expected. It must be clearly stated that the Bravia 3 is not a television for those looking to extract the maximum quality from the most challenging film materials.

This does not mean, however, that everything performs averagely. Sony has equipped this model with an additional PFS filter, which works similarly to solutions used in QLED televisions. As a result, the coverage of the DCI-P3 colour gamut has increased to over 91 percent. In everyday use, this means more vivid, saturated colours and also a more pleasing image texture. Even though it lacks strong lighting effects, films and series can look significantly more appealing than with its predecessor, the X75WL.

Testing the Hisense E8Q in Filmmaker mode, we were hoping for a possibly neutral image close to the director's vision. Unfortunately – although it doesn't look bad on paper (the colour reproduction errors are not significant), in practice the image appears not entirely natural. The reason? An overly strong boost in blue colour and a lack of red in the white balance. The effect? Scenes look cool, and the white seems slightly bluish. Alongside the U7Q model, we also noticed a specific approach to brightness management here. The brightness mapping curve for HDR content (EOTF) shows that the television can significantly dim small, bright elements on the screen to maintain contrast – but sometimes it goes too far in this. On the other hand, larger, very bright areas can be excessively brightened, which disrupts tonal balance. This is a compromise that may not suit everyone – especially if you want an as faithful image as possible right out of the box.

Sony Bravia 3 was primarily tested in film mode, which immediately proved to be the best choice among the factory settings. It is not an ideal picture, but compared to the eco mode that the television offers right out of the box, the difference is clear and it is a positive one. In film mode, one can notice a certain issue: the image appears too warm, which results from the lack of blue in the white balance. Nevertheless, in SDR content, the final effect can still be regarded as quite decent and satisfying for everyday viewing. Much more serious errors occur in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management, combined with limited colour gamut coverage, further exposes the shortcomings of the image in this mode. All of this means that HDR in the Bravia 3 edition is unconvincing and can spoil the impression left by a quite decent SDR content setup. Fortunately, this is not a hopeless situation. Various errors can be mitigated to some extent, and some can even be completely corrected through professional calibration. Therefore, we decided to check how the television would perform after such adjustments.

The calibration of the Movie mode yielded really good results, especially when it comes to SDR content. We managed to balance the white levels, which made the image look more natural – it appeared almost reference-quality. The colours were well-saturated, and the overall perception of the content improved significantly. Unfortunately, when we switched to HDR materials, familiar issues from the U7Q model returned. The television still likes to "do its own thing," as evident from the analysis of the brightness characteristic EOTF – despite calibration, the E8Q still dimmed fine details in the shadows, while the bright areas of the screen could be excessively boosted. In practice, this means that in darker scenes, some of the smallest details could simply disappear. Although it must be acknowledged that the entire calibration process brought a lot of good, not everything can be circumvented – even with the use of professional tools. The E8Q can impress with its picture, but in HDR content, its design limitations become apparent, and it is worth keeping this in mind.

Calibration allowed us to extract significantly more from the ChooseTV 3 than we could have expected at first. Firstly, it was possible to address the lack of blue, which had previously caused a noticeable warming of the image. After a slight adjustment to the white balance, most of the errors in the Color Checker measurements for SDR content practically disappeared. The shades of white became more natural, and the brightness management in gamma stabilised to a nearly perfect level, not exceeding the threshold of human eye perception. Therefore, it can confidently be said that in SDR content, after a few adjustments in settings, the ChooseTV 3 performs really brilliantly. Much worse, although still definitely better than before calibration, are the HDR contents. The white balance was brought into order, but the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which is immediately noticeable. Colour-wise, the effect is also improved, although far from ideal – many errors still exceed the threshold of four, or even five delta E units, meaning they remain visible to the human eye. It was already clear earlier that the ChooseTV 3 is not a television designed to impress with HDR quality. Nonetheless, it is pleasing to note that in SDR content, after calibration, the image can look truly excellent, and in this category, the television positively surprised us.

In the case of older materials with lower quality, a gentle smoothing of tonal transitions often comes in handy. The Hisense E8Q, like the U7Q, features an "Smoothing and Gradient Image" function, but unfortunately – its effectiveness leaves much to be desired. The "Low" mode is almost imperceptible in operation, and the higher settings do not improve transitions but simply blur the details. The good news is that the function does not compromise film grain, meaning it does not worsen the structure of the image. On the plus side, scaling is commendable. The television is able to sensibly upscale older content to a higher resolution – without artificially accentuating contours or excessive sharpening. Although it does not match the best models in this category, it performs quite well for its class.

Bravia 3 brings something more than just a shared name to the Sony television family. It stands out primarily for its ability to enhance the quality of inferior materials thanks to the processor used. Of course, we won't find the advanced XR chip known from more expensive models here, but nevertheless, it's worth noting that the image at lower resolutions looked surprisingly good. The upscaling worked effectively, and most parts of the screen were free from the typical excessive edge tearing characteristic of budget constructions. The feature enhancing the smoothness of tonal transitions is also noteworthy. In the high setting, it performs really well, effectively masking gradation imperfections without significant loss of detail. It does happen, however, that the algorithm overly smooths elements that should remain sharp – for example, faces – but overall, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to those watching lower-quality content.

Similar to the U7Q, the E8Q model is a fast television designed for dynamic content. It supports a refresh rate of 144 Hz at 4K resolution, and if, for some reason, someone is still gaming in Full HD – it can even reach 240 Hz. This is a significant advantage, especially for PC users looking for maximum smoothness. In everyday use, the television performs very well. The "Ultra Motion Smoothness" mode offers two sliders that allow you to customise the picture to your preference – whether more cinematic with the film frame preserved or highly smoothed, almost "series-like". It's good that the manufacturer provides a choice here instead of imposing one style. On sports material, live broadcasts, or in games – movement looks clean and stable. Of course, it is not at the OLED level, but for this price range, the E8Q performs really well.

The fluidity of motion has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that may appeal to those more sensitive to the way images are displayed. This refers to the proprietary motion smoother, Motion Flow, which offers users a considerable amount of adjustment options. With it, one can make the image smoother, even theatrical, or stick to a more cinematic style with the characteristic judder that many associate with a filmic atmosphere. These functions work with content shot at lower frame rates, such as films and series recorded at 24 or 30 frames per second, which is the kind of material we encounter daily. It is precisely at this point that the motion smoother turns out to be one of the most important features in everyday use of the television, and here the Bravia 3 performs quite well.

Hisense E8Q does not hide its gaming heritage. Even the specifications reveal that we are dealing with a television that will perform excellently as a gaming screen. Variable Refresh Rate (VRR)? It's there. Automatic switching to game mode (ALLM)? That's there too. Additionally, there is impressive refresh rate – 120 Hz in 4K or even 240 Hz in Full HD. Such a set is rare in this price segment. Everything works smoothly and without major surprises. The only missing element – similar to the U7Q – is support for HGiG. It’s a shame, as this feature facilitates adjusting the brightness curve to the capabilities of a specific television, improving visual compatibility with the intentions of HDR game creators. Without it, one has to manually fiddle with the settings, which does not always yield a satisfactory result.

Bravia 3 is not a device for e-sports enthusiasts or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports puts an end to that discussion before it can even begin. This is a television for casual gamers who, after work, will fire up FIFA or racing games, not for someone who measures every frame in a spreadsheet. Nevertheless, Sony has included a few nice extras so that it isn't all so bare. ALLM works as it should, automatically switching the television to game mode (low latency). There's even a simple Game Bar, which is clear and straightforward. However, the biggest curiosity here is the PlayStation Portal app. Thanks to it, you can launch games from the PS5 wirelessly and see them immediately on the television screen. It sounds great, but it only takes a few minutes to feel significant delays. In our opinion, it is more of a showcase of capabilities than something you can use on a daily basis. If someone really wants to play, it is better to connect the console with an HDMI cable and forget about wireless issues.