Hisense A7NQ vs Sony BRAVIA 2 II (S25M2)

We checked how the Hisense A7NQ performs with HDR, and there are no surprises here. The luminance graph showed a maximum brightness level of 370 nits. The result? Exactly what one could expect – average. At around 350 nits, HDR does not particularly stand out compared to SDR. Indeed, there is a subtle difference in more brightly lit scenes, but it is not an effect that leaves you stunned. As for the coverage of the wide colour gamut, the result was 92% for DCI-P3 and 70.2% for BT.2020. These are decent values for a TV in this class, which uses a PFS coating – the same one that is sometimes promoted as QLED. Colours look good, but we shouldn’t expect something that competes with the best screens on the market. HDR on the Hisense A7NQ is more of an addition than a "game changer." For those looking for solid image quality on a moderate budget – quite acceptable. However, if we expect full HDR capabilities, it is worth looking at models from the higher price range.

The Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is clearly too low for the brightest parts of the image to look truly impressive. In practice, HDR here does not differ that much from standard SDR. Bright highlights, the sun or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with standard SDR content, and in that use its limited brightness will be least noticeable.

Colour gamut coverage

The Sony Bravia 2 II is also not impressive in terms of colour. The TV does not use any additional gamut‑expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements coverage of the DCI‑P3 gamut was about 78%, and the very wide BT.2020 roughly 57%. That's definitely too little to talk about truly saturated colours in HDR material. More intense reds, greens or turquoises will simply be less striking than on TVs with an expanded colour gamut. The Bravia 2 II therefore performs much better in the Rec.709 standard, the gamut used for films, series and television in SDR.

When testing the Hisense A7NQ in Filmmaker mode, we were hoping for compliance with the manufacturer's assumptions, but unfortunately, reality looks different. The main issue, as with most televisions, is white balance. In the case of the A7NQ, we noticed a clear dominance of blue, which affected both lower quality materials and 4K HDR content. The results of the Color Checker tests confirm this, and the comparative images speak for themselves – the leading actress in "factory" mode appears cool and pale. It looks as if she has been drained of life.

As for brightness characteristics, both gamma and the EOTF curve show that the image is excessively bright. As a result, everything appears flat, lacking depth and contrast. This state of affairs definitely does not work in favour of the A7NQ and makes the viewing experience in factory mode leave much to be desired. If we expect natural colour reproduction and appropriate image depth, the A7NQ in Filmmaker mode is unlikely to impress us. It is a television that requires considerable adjustment to bring out its potential.

The out-of-the-box colour reproduction in Cinema mode was actually quite good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colours shifted to slightly warmer, at times faintly pinkish, tones. However, this wasn’t a major fault and during normal viewing the picture still looked fairly natural. There was a bit more happening with image brightness. Looking at the gamma curve, you can see Sony doesn’t stick perfectly to the reference value. The darkest areas are slightly lifted, while as brightness increases the gamma gradually rises and a larger part of the picture becomes darker than it should. That said, it’s not such a large difference as to be very distracting in everyday viewing. Overall, SDR straight out of the box performs quite respectably.

The situation is considerably worse in HDR. We’ve already mentioned the limited colour gamut, but in addition the Bravia 2 II noticeably manipulates image brightness here. The EOTF curve sits below the reference value for a large part of its range, which means the TV renders most mid and brighter parts of a scene darker than the source material intends. Only towards the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks much brightness, but can also simply look too dark.

Hisense A7NQ offers several tools that allow for improved image quality, so we decided to take matters into our own hands and "dig around" in the settings a bit. Thanks to professional tools and measurements, we managed to correct the white balance, eliminating the excessive dominance of blue colour in both HD and 4K materials. This is a significant step forward, as in the Color Checker test, the colour reproduction errors in lower quality content dropped to a much more acceptable level. Unfortunately, the 4K materials still fall short of perfection – the colour inaccuracies are considerable and stem from the limitations of the television.

As for the gamma, we managed to set it at the correct level, which significantly reduced the excessive brightening of the image. However, the issue with brightness characteristics in 4K content remains unresolved – the EOTF curve still shows excessive brightness across the entire screen. It’s possible that correct implementation of dynamic tone mapping could help here, but as we mentioned earlier, this feature in the Hisense A7NQ works rather poorly, rather than being helpful. Nevertheless, the calibration has significantly improved the overall image reception. The director's vision is now much better represented than in the factory settings, which will certainly be appreciated by more demanding viewers.

Calibration did a lot for the Bravia 2 II, particularly with SDR content. Above all, we managed to even out the white balance and tidy up the gamma, which now follows the reference value much more closely. As a result, the image no longer has the previous pink cast, and the brightness across different areas is much better organised. You can also see this in the colour errors, which after calibration fell to a very low level (with slight issues in the most saturated reds). We also partially managed to rein in the Bravia 2 II in HDR, especially in the way the television handles image brightness. However, there is one thing no calibration can fix: the capabilities of the panel itself. A narrow colour gamut means the television is physically unable to reproduce the most saturated colours present in HDR material. On top of that, the low contrast of the IPS panel means darker scenes are veiled by a grey haze, which robs colours of some of their depth. So we can improve how the Bravia 2 II makes use of its capabilities, but unfortunately we cannot overcome the panel's inherent limitations.

The Hisense A7NQ impresses with the smoothness of tonal transitions in 4K content, but unfortunately, there is no feature here to improve this aspect in older materials of lower quality. In such cases, colour transitions become more visible, which can slightly detract from the overall image, especially in scenes with a lot of gradients.

When it comes to upscaling, the television performs surprisingly well. The image is noticeably improved, although there are some compromises. It can be seen that the television adds a bit of artificial sharpness, and background elements, such as branches, display slight "jaggies." However, these are details that will primarily catch the eye of those who pay attention to such nuances.

The upscaling on the Bravii 2 II is quite good and, in that respect, the TV matches the standard Sony has set. Lower-resolution content is sensibly upscaled to 4K, and the image is slightly smoothed in the process without excessive edge sharpening. The situation is worse when it comes to improving footage with visible compression artefacts. This is handled by the "Digital Noise Reduction" function, which at the "High" setting can indeed smooth out some unpleasant tonal banding. The problem is that it does this rather aggressively and, along with the imperfections, it also removes a lot of fine detail, including natural film grain. What is more, when there is more motion on screen its effectiveness drops sharply and any improvement is then minimal. For everyday use we therefore tended not to use this function.

The Hisense A7NQ is equipped with a 60 Hz panel, which means that dynamic scenes – for example in sports or games – perform rather averagely here. This is standard for this class of equipment, but it must be acknowledged that watching more intense, fast-moving content can leave a lot to be desired. However, when it comes to films, the television offers a motion smoothing feature that operates on a 10-point scale. The "judder reduction" option allows you to tailor the smoothness of the image to your own preferences. At the lowest setting, we get a natural film frame rate, which will please cinema purists. Meanwhile, the maximum setting provides a very smooth, theatrical image that may appeal to those who prefer a more "smoothed" motion.

Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, bear in mind that it is a basic panel and its limitations are already clearly visible, especially during sports. The TV cannot interpolate 50/60 fps material to a higher refresh rate, so it cannot further improve the sharpness of fast-moving objects. For films and series, however, it offers a conventional motion smoothing feature that can reduce the characteristic judder of material shot at 24 fps.

Hisense A7NQ is a piece of equipment that can pleasantly surprise gamers, although it is not without its flaws. The fact that we have a 60 Hz panel here immediately suggests that the television is not designed for the most demanding gaming scenarios. The motion blur that we described earlier can also be an obstacle, especially in dynamic games.

However, there are a few things that are worth praising. The television supports ALLM (automatic game mode) and VRR (variable refresh rate), which is not always standard in this price range. The biggest surprise, however, is that the A7NQ can display images at 120 Hz – albeit only in Full HD resolution, but nevertheless, it's a significant nod to gamers. This provides the option to choose between smoothness and resolution, which is not obvious in televisions at this price.

A nice addition is the Game Bar, which is clear and practical – all the most important functions are at hand, without digging through the settings. However, it lacks support for HGiG, which may be a disappointment for gamers looking for perfect HDR in games.

The Bravia 2 II is not a television that lends itself well to gaming, and the list of features shows that quite quickly. You essentially only get the automatic low-latency mode ALLM and a simple Game Bar that lets you view basic signal information and change a few settings. But that is where the list of strengths ends. The TV does not support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It is suitable for occasional console gaming, and thanks to low input lag controls remain responsive, but if someone is looking for a TV primarily for games, the Bravia 2 II will simply be a rather limited choice.