Hisense A6Q vs Sony BRAVIA 2 II (S25M2)

The Hisense A6Q is unfortunately difficult to recommend for watching HDR content. The main issues are low brightness and rather modest coverage of a wide colour gamut. The measured brightness of around 300 nits simply isn't sufficient for HDR materials to look impressive. In practice, the picture often resembles standard SDR instead of true HDR with clear differences in brightness and dynamics. Additionally, the colours in such materials do not appear as they should. The television does not utilise additional filters such as QLED or PFS LED, and the coverage of the DCI-P3 colour space at around 80% means that some colours look rather washed out. Consequently, some scenes in HDR materials lose intensity and spectacle, making it difficult to speak of a full HDR experience.

The Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is clearly too low for the brightest parts of the image to look truly impressive. In practice, HDR here does not differ that much from standard SDR. Bright highlights, the sun or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with standard SDR content, and in that use its limited brightness will be least noticeable.

Colour gamut coverage

The Sony Bravia 2 II is also not impressive in terms of colour. The TV does not use any additional gamut‑expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements coverage of the DCI‑P3 gamut was about 78%, and the very wide BT.2020 roughly 57%. That's definitely too little to talk about truly saturated colours in HDR material. More intense reds, greens or turquoises will simply be less striking than on TVs with an expanded colour gamut. The Bravia 2 II therefore performs much better in the Rec.709 standard, the gamut used for films, series and television in SDR.

We conducted the tests in the best available mode, namely Filmmaker, however – as is often the case – this does not mean an ideal image straight out of the box. In the case of Hisense A6Q, this mode clearly "swallowed" too much blue in everyday SDR content. In practice, this led to an image with a yellowed white, particularly noticeable on large, bright surfaces. This is not due to poor assumptions of the Filmmaker mode itself or the vision of filmmakers, but rather the factory settings requiring adjustment.
Furthermore, looking at the saturation characteristics and the gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

The out-of-the-box colour reproduction in Cinema mode was actually quite good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colours shifted to slightly warmer, at times faintly pinkish, tones. However, this wasn’t a major fault and during normal viewing the picture still looked fairly natural. There was a bit more happening with image brightness. Looking at the gamma curve, you can see Sony doesn’t stick perfectly to the reference value. The darkest areas are slightly lifted, while as brightness increases the gamma gradually rises and a larger part of the picture becomes darker than it should. That said, it’s not such a large difference as to be very distracting in everyday viewing. Overall, SDR straight out of the box performs quite respectably.

The situation is considerably worse in HDR. We’ve already mentioned the limited colour gamut, but in addition the Bravia 2 II noticeably manipulates image brightness here. The EOTF curve sits below the reference value for a large part of its range, which means the TV renders most mid and brighter parts of a scene darker than the source material intends. Only towards the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks much brightness, but can also simply look too dark.

The colours after calibration in the Hisense A6Q should be assessed in two ways, as everything depends on the type of content. In the case of SDR material, the effect is truly very good. In everyday programmes, series, and films, it is difficult to spot any serious problems with colours. The yellow tint has been effectively removed, and the television no longer brightens the entire image. As a result, the ColorChecker test showed errors below Delta 2 values, which are already outstanding results, allowing us to speak of very high image quality in standard content. Unfortunately, the situation looks significantly worse in the case of HDR material. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means the television still generates quite significant colour errors. Certain colours simply cannot be displayed by the screen, making them appear less saturated than they should be. It's a shame because even a simple PFS or QLED filter would significantly improve the final effect. The conclusion is therefore simple – the A6Q is really very well suited for SDR content after calibration, while watching HDR content on it should still be approached with caution.

Calibration did a lot for the Bravia 2 II, particularly with SDR content. Above all, we managed to even out the white balance and tidy up the gamma, which now follows the reference value much more closely. As a result, the image no longer has the previous pink cast, and the brightness across different areas is much better organised. You can also see this in the colour errors, which after calibration fell to a very low level (with slight issues in the most saturated reds). We also partially managed to rein in the Bravia 2 II in HDR, especially in the way the television handles image brightness. However, there is one thing no calibration can fix: the capabilities of the panel itself. A narrow colour gamut means the television is physically unable to reproduce the most saturated colours present in HDR material. On top of that, the low contrast of the IPS panel means darker scenes are veiled by a grey haze, which robs colours of some of their depth. So we can improve how the Bravia 2 II makes use of its capabilities, but unfortunately we cannot overcome the panel's inherent limitations.

Upscaling on the Hisense A6Q works quite decently for a television in this price range. Materials of lower resolution are correctly "upscaled" to a higher one, and the image remains clear without artificial edge enhancement or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly worse. In practice, it is difficult to speak of any advanced artifact smoothing or problematic tonal transition masking. In heavily compressed films – especially those from YouTube – the television practically struggles with reducing compression blocks and unwanted banding, making the imperfections in the material clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the quality of the source.

The upscaling on the Bravii 2 II is quite good and, in that respect, the TV matches the standard Sony has set. Lower-resolution content is sensibly upscaled to 4K, and the image is slightly smoothed in the process without excessive edge sharpening. The situation is worse when it comes to improving footage with visible compression artefacts. This is handled by the "Digital Noise Reduction" function, which at the "High" setting can indeed smooth out some unpleasant tonal banding. The problem is that it does this rather aggressively and, along with the imperfections, it also removes a lot of fine detail, including natural film grain. What is more, when there is more motion on screen its effectiveness drops sharply and any improvement is then minimal. For everyday use we therefore tended not to use this function.

The motion fluidity of the Hisense A6Q is… well — quite mediocre. It’s a television with a native refresh rate of 60 Hz in 4K, which means that the motion of objects on the screen doesn’t always look perfectly smooth. In dynamic scenes in movies or sports, it’s clear that this isn’t the strongest feature of this model. The situation improves significantly with 1080p content when connecting a console or computer, as the A6Q can operate even at 120 Hz then. This is a big plus, especially for gamers. Nevertheless, the clarity of motion still leaves much to be desired; blurring is noticeable, and the response time of the panel indicates that it is not one of this television’s strong points.

Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, bear in mind that it is a basic panel and its limitations are already clearly visible, especially during sports. The TV cannot interpolate 50/60 fps material to a higher refresh rate, so it cannot further improve the sharpness of fast-moving objects. For films and series, however, it offers a conventional motion smoothing feature that can reduce the characteristic judder of material shot at 24 fps.

For such an inexpensive television, the Hisense A6Q can truly surprise with what it offers to gamers. It operates in 4K only at 60 Hz, but when a game switches to performance mode and drops to 1080p, the panel can work even at 120 Hz. This is a significant advantage in this price range, as most titles on consoles don't achieve stable 4K at 120 frames per second anyway. In practice, we are realistically playing at 1080p, and here the A6Q provides very enjoyable gaming experiences. On top of that, there are several features usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so there's no need to dig through the entire menu. For such an affordable piece of equipment, it's a really solid set for gamers — perhaps not for the most demanding, but certainly spot on for occasional gaming.

The Bravia 2 II is not a television that lends itself well to gaming, and the list of features shows that quite quickly. You essentially only get the automatic low-latency mode ALLM and a simple Game Bar that lets you view basic signal information and change a few settings. But that is where the list of strengths ends. The TV does not support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It is suitable for occasional console gaming, and thanks to low input lag controls remain responsive, but if someone is looking for a TV primarily for games, the Bravia 2 II will simply be a rather limited choice.