Hisense A6N vs TCL P7L / P79L

The HDR performance of the A6N is unfortunately underwhelming. A peak brightness of 250 nits does not allow for spectacular effects, and HDR comes across as rather lacklustre, more like ordinary SDR. This will not satisfy more demanding users who want to enjoy high-quality cinematic content. In addition, colour gamut coverage is not very impressive either: an 82% DCI-P3 result is average and does not allow viewers to fully enjoy vivid colours in HDR content.

The biggest limitation of the TCL P7L in HDR is simply brightness. The TV does not have much luminance headroom, so strong highlights, the sun or small light sources can't clearly 'pop' out of the picture. As a result, even well-produced HDR material looks fairly restrained and, in terms of dynamics, is closer to good SDR than to what brighter models show. That does not mean the P7L completely fails at HDR. The issue is primarily a lack of backlight power.

Looking at colours, the situation is a little better. The TV covers around 91% of the DCI-P3 gamut and about 68% of the wide BT.2020 colour space, so for this price class the colour range is quite respectable. TCL markets this model as QLED, although the nature of the solution used is closer to backlighting that uses a PFS phosphor than to a classic quantum-dot layer. What matters most to the viewer, however, is the effect: more saturated colours are on offer.

In terms of colour reproduction, the Hisense A6N in Filmmaker Mode leaves much to be desired. Although the mode's name suggests we should expect faithful rendering of cinematic colours, the reality is different, and the TV has significant problems with picture quality. The white balance issue is particularly noticeable for both HD and 4K material, being severely skewed by a dominance of blue. This results in artificial, cool tints, which are clearly visible in the comparison photo below. The Colour Checker test further confirms these errors, which are compounded by low colour gamut coverage.

The gamma luminance characteristic reveals a serious problem with maintaining the 2.4 level, the curve sitting well below the reference value and causing the image to be overly bright with washed-out blacks. The EOTF curve for 4K material also points to brightness issues, with a pronounced rise at the low end caused by the TV's excessive brightening, which negatively affects picture quality. Such image behaviour prevents fully enjoying films and requires manual calibration.

In Film mode the TCL P7L performs quite respectably without major changes to the settings, particularly with ordinary SDR material. White balance is relatively even, though as brightness increases there is a slight rise in red and blue and a touch too little green. This does not, however, produce a strongly visible tint and most colours remain close to their reference points. The Colour Checker confirms this, with a large portion of errors falling below the level that should be particularly noticeable during normal viewing. We have more reservations about the gamma response. In the darkest parts of the image the TV runs it noticeably above the reference value, so some shadow detail can be a little too subdued. The characteristic then calms down and across much of the range it is close to the intended behaviour. As a result SDR generally looks natural, but in dark scenes the P7L can lose some subtlety.

In HDR the factory calibration is less precise. As brightness increases the excess of blue becomes more pronounced, which can make the image look cooler than it should. The number of larger colour deviations also grows, particularly in brighter hues. As for the EOTF curve itself, it is handled fairly conservatively, with the TV showing the image darker than the reference across much of the range. For such an inexpensive model, the factory Film mode settings are not bad.

Hisense A6N offers options and tools in its settings to adjust many image parameters that we have utilized. When it comes to white balance, we managed to eliminate the excess blue colour – this effect is clearly visible in the comparison photo below, where the boy in the image seemingly "comes to life". A significant improvement can also be noticed in the gamma brightness characteristics – the television no longer has serious issues with excessively brightening the entire image. Unfortunately, the same cannot be said for 4K content, where the EOTF curve could not be fully corrected due to the exceptionally low brightness of this model. For HDR materials, we apply dynamic tone mapping, which allows for the recovery of many details despite the boosting of mid-tones in the image. For this television, this provides more benefits than drawbacks. The errors that are still visible in the colour palette test and Colour Checker for 4K materials stem from the low colour gamut coverage and are difficult to eliminate due to the characteristics of the television. Nevertheless, the tonal quality of the image is significantly better, which is why we recommend calibrating the factory settings, which are far from ideal.

After calibration the TCL P7L can deliver a genuinely pleasant picture, especially with conventional SDR material. We managed to even out the white balance very well, and the gamma curve now tracks close to the target value of 2.4. This is also reflected in the colour measurements: most errors have fallen noticeably, and in everyday viewing it is hard to point to any obvious inaccuracies. Films, series, YouTube and ordinary broadcast TV therefore look more natural, without unnecessary warmth or a cool tint. For a model in this price bracket the SDR performance is really very good.

With HDR the situation becomes more complicated. Calibration helped improve the white balance and tidy up some deviations, but here the panel's limitations become increasingly apparent. The P7L has relatively low brightness and cannot maintain adequate luminance for more saturated colours, so some errors remain even after careful tuning. In other words, settings can improve the way the TV interprets the signal, but they cannot overcome its physical limits. That is why calibration makes most sense for this model primarily in SDR.

Let's check how A6N performs with low-quality materials. When it comes to smoothing tonal transitions, the lack of posterisation reduction or smoothing of tonal transitions in low-quality materials such as television or DVD can be noticeable for more demanding viewers. In terms of digital processing, the model is presented correctly, and the branches are devoid of characteristic jaggedness – the image is very plastic and soft, which may appeal to those who prefer this style of image.

In this respect the TCL P7L performs surprisingly well, especially for such an inexpensive TV. The banding-reduction feature, which in many budget models does little or nothing, actually manages to improve the picture here. It does not remove all banding entirely, but it can noticeably reduce posterisation and make more challenging gradients look more natural. At this price point that’s a genuinely pleasant surprise. Upscaling itself also performs well. Lower-resolution material is scaled correctly, without over-sharpening or adding artificial outlines around objects. Of course the P7L won’t turn a very poor source into a 4K-quality image, but for regular TV the result is simply solid. For a model in this class there is little to criticise.

The 60 Hz panel in Hisense A6N will probably satisfy people who enjoy watching films, because the TV offers an "ultra motion smoothing" feature, which lets you adjust the image's choppiness, making it either more staccato or more fluid and cinematic. When it comes to motion blur, performance is fairly average, with quite noticeable smearing, especially on dark backgrounds, which is a fairly typical characteristic for this class of TVs.

The TCL P7L uses a panel with a native 60 Hz refresh rate at 4K resolution, and that's how it should be regarded in everyday use. When watching films the TV mainly offers frame interpolation, so it can smooth motion and reduce the characteristic judder, but it does not deliver the fluidity typical of true 120 Hz panels.

Hisense A6N is a television that will probably appeal to casual gamers, mainly because of its 60 Hz panel, which may not satisfy more demanding users. Despite that, it offers a few conveniences that can make gaming more enjoyable. The TV supports features such as ALLM (automatic low-latency mode), VRR (variable refresh rate) and Dolby Vision, allowing you to enjoy better image quality and smoother motion in games that support these technologies. Moreover, the low input lag means in-game reactions are quick, which is crucial, especially in fast-paced titles. Thanks to these features, although the TV is not the ideal choice for demanding gamers, it provides solid support for those who value comfortable gaming without complicated settings. It is an ideal solution for people who want to enjoy gaming without high hardware demands while having access to modern technologies that enhance the gaming experience.

For such an inexpensive TV, the P7L has quite a lot to offer gamers. It has ALLM, VRR, Dolby Vision for gaming, and TCL also includes its Game Bar, which lets you quickly check the key information or change some settings without leaving the game. Not everything is perfect, though, because HGiG doesn’t work here as it should, but at this price point it’s hard to complain about the feature set. The most interesting part starts when you give up 4K. At that resolution the TV runs at up to 60 Hz, but at 1440p and 1080p it can display at 120 Hz. And that’s not just a line in the specs. In fast-paced games that support that frame rate you can really notice the improvement in smoothness, so if you value smoother motion more than maximum image detail, that mode can make a lot of sense. Of course, that doesn’t turn the P7L into a proper 120 Hz TV. Even so, those extra modes are exactly what make the P7L perform very well for gaming.