Hisense A6N vs Philips PUS8209

The quality of the HDR effect on A6N unfortunately does not impress. The peak brightness of 250 nits does not allow for spectacular effects, and HDR appears rather dull, resembling more of a regular SDR. This state of affairs will not satisfy more demanding users who wish to enjoy high-quality film materials. Additionally, the coverage of the colour palette is also not very impressive – a DCI-P3 level of 82% is an average result that does not fully allow one to enjoy vibrant colours in HDR materials.

Unfortunately, this is where the problems begin. A maximum brightness of 280 nits is definitely too low to feel the true effect of HDR. In practice, the image resembles standard SDR more, so it’s hard to speak of deeper visual experiences. On the positive side, the colour gamut coverage is commendable – 91.4% DCI-P3 is a score that will be sufficient for most films. It must also be said that the image is stable and there are no issues with sudden changes in brightness or colours. Overall, HDR on this television is more of a formality than an actual added value. If we are looking for genuine HDR thrills, this model may not meet expectations.

In the category of colour reproduction, the model Hisense A6N in Filmmaker Mode leaves much to be desired. Although the name of the mode suggests that we should expect faithful reproduction of cinematic colours, the reality is different – the television has significant issues with image quality. The problem with white balance is particularly noticeable, both for HD and 4K materials, which is heavily disrupted by the dominance of blue. This results in artificial, cold tones, which can clearly be seen in the comparison photo below. The Colour Checker test further confirms these errors, which are exacerbated by low colour gamut coverage.

The gamma brightness characteristic shows a serious problem in maintaining a level of 2.4 – the graph is significantly below the reference value, which leads to excessive image brightness and washed-out blacks. The EOTF curve for 4K materials also indicates brightness issues – at the beginning, there is a significant spike, which results from the television's excessive brightness, negatively impacting image quality. Such image characteristics do not allow one to fully enjoy watching films and require manual correction.

Philips PUS8209 offers many picture modes, but the best of them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its clear problems. In the case of HD content, the white balance is characterised by a strong dominance of red, which causes the picture to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in the mid-tones, has serious issues at the beginning and end of the curve. Drops in the shadows cause a loss of detail in the dark areas, and blowouts in the bright areas make some elements look unnatural.

For high-quality 4K HDR content, the situation reverses. In this case, blue dominates, leading to an artificial enhancement effect, reminiscent of unnatural retail settings. Such an image looks unattractive and inconsistent with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference chart, causing the image to appear too dark, robbing the depth and detail of HDR content.

Against this backdrop, errors in the Color Checker test and deviations in colour palette reproduction are exceptionally large, which further negatively impacts the overall image quality. The Filmmaker mode, although the best among the available options, requires substantial corrections to fully convey the director's vision.

Hisense A6N offers options and tools in its settings to adjust many image parameters that we have utilized. When it comes to white balance, we managed to eliminate the excess blue colour – this effect is clearly visible in the comparison photo below, where the boy in the image seemingly "comes to life". A significant improvement can also be noticed in the gamma brightness characteristics – the television no longer has serious issues with excessively brightening the entire image. Unfortunately, the same cannot be said for 4K content, where the EOTF curve could not be fully corrected due to the exceptionally low brightness of this model. For HDR materials, we apply dynamic tone mapping, which allows for the recovery of many details despite the boosting of mid-tones in the image. For this television, this provides more benefits than drawbacks. The errors that are still visible in the colour palette test and Colour Checker for 4K materials stem from the low colour gamut coverage and are difficult to eliminate due to the characteristics of the television. Nevertheless, the tonal quality of the image is significantly better, which is why we recommend calibrating the factory settings, which are far from ideal.

After calibration, the white balance for HD and 4K content has significantly improved. Although we have not achieved a perfectly flat characteristic, the effect is definitely better than before. The picture on the television no longer appears artificially warm or excessively cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted – the biggest issues at the beginning and end of the graph have been mitigated. The EOTF curve, responsible for brightness in 4K HDR material, has been stabilised, eliminating problems with excessive dimming of the image. In the colour palette test, some imperfections can still be noticed due to average coverage of the wide colour gamut, which is a limitation of the equipment itself. Nevertheless, the final effect is clearly better than before calibration – the image looks more natural and approaches the expectations of the Filmmaker mode.

Let's check how A6N performs with low-quality materials. When it comes to smoothing tonal transitions, the lack of posterisation reduction or smoothing of tonal transitions in low-quality materials such as television or DVD can be noticeable for more demanding viewers. In terms of digital processing, the model is presented correctly, and the branches are devoid of characteristic jaggedness – the image is very plastic and soft, which may appeal to those who prefer this style of image.

The television offers a "Distortion Reduction" feature that effectively improves the gradation of tonal transitions, especially when set to the minimum level. Unfortunately, this comes at a cost – the feature simultaneously smooths out details such as the texture of materials. On the positive side, it is worth noting that the operation of this option does not negatively affect film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, one can sometimes notice issues with aliasing on certain elements, such as branches or fine details, which can lower the quality of reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

The 60 Hz panel in the Hisense A6N will likely satisfy those who enjoy watching films, as the television offers an "ultra motion smoother," allowing us to adjust the motion smoothness – either more choppy or more fluid, cinematic. When it comes to motion blur, it performs rather average – noticeable blur is evident, especially on dark backgrounds, which is quite a typical feature in this range of televisions.

The 60 Hz panel in the Philips PUS8209 is mainly suitable for watching films, but there is still a sense of something missing. The television does not offer any motion smoother that would allow users to adjust the fluidity of the picture to their individual preferences, which can be disappointing for some users.

Hisense A6N is a television that is likely to appeal to casual gamers, primarily due to its 60 Hz panel, which may not satisfy more demanding users. Nevertheless, it offers several features that can enhance the gaming experience. The television supports functions such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Dolby Vision, which allows for better picture quality and smoother motion in games that support these technologies. Moreover, the low input lag ensures quick reactions in gameplay, which is crucial, especially in dynamic productions. With these features, although the television is not an ideal choice for demanding gamers, it provides solid support for those who appreciate comfortable gaming without complicated settings. It is an ideal solution for individuals who want to enjoy gaming without high hardware requirements while also having access to modern technologies that enhance gameplay quality.

The Philips PUS8209 offers basic features useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and a Game Bar that makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the television will not meet the expectations of more demanding gamers who are counting on higher smoothness and image precision. Additionally, this model does not support any HDR mode dedicated to gaming, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.