Haier Q80FUX vs Samsung Q6F (IPS)

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

The Samsung Q6F is, unfortunately, a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is a value that is decidedly too low to even talk about any effect of “high dynamic range,” or HDR. In practice, it’s better to stick to content in SDR format, which simply looks more predictable on this television. Another problem is the global dimming technique – in scenes with a lot of black, the television drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and the brightness can drop below 100 nits. The only consolation is supposed to be the QLED technology, but even here it is average. The layer of quantum dots used is not of the highest quality, as the coverage of the DCI-P3 colour palette does not exceed 90%. As a result, the colours in HDR content may simply appear under-saturated.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

We tested the television in Filmmaker mode, which showed us two completely different facets of this model. Looking at SDR content, we were genuinely shocked at how good this television looks straight out of the box. It was really difficult to find fault with anything here. Despite a slight 'muddiness' in the white balance or somewhat brightened details in the blacks (which directly stem from the design of the IPS panel), the colour errors hovered around a level of '2'. This result is not only surprisingly good but downright amazing, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colours after switching to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so enormous that our charts literally ran out of scale. Of course, since Samsung even in such an affordable model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at the '1' level are something generally seen in devices costing several thousand pounds. In this regard, the Q6F is really an excellent screen for everyday television, less demanding series or films. Unfortunately, our intervention in the HDR mode did not bring a noticeable improvement. The television, due to its poor blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR exists mainly as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

Q6F performs very well in upscaling lower-resolution content to native 4K. The scaling here is surprisingly good, even for such an inexpensive television from the QLED series. The only downside is the situation where we are watching very low-resolution materials, such as 576p (typical for old DVD players) – in which case the image may be slightly cropped. This is due to the fact that the television does not allow the Overscan function to be turned off, which is a typical issue with Samsung devices.

The situation is completely different when it comes to digital processing, specifically the attempt to smooth the image of unwanted artifacts. Here the television completely fails. Although there is a function in the menu called "Noise Reduction," it yields no visible results regardless of the slider setting. The only thing it manages to do is introduce undesired errors in the image. Despite its presence in the system, we definitely do not recommend using it.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

The 60 Hz panel in the Samsung Q6F is standard for this price range, making it rather average for dynamic sports or gaming. However, when it comes to films, the television performs quite well thanks to the motion smoothing feature. The "Motion Reduction" option allows you to adjust the smoothness of movement to your own preferences – from maintaining a cinematic character to complete fluidity.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.

We're not going to beat around the bush – the Q6F is not a television designed for gamers. Although it features additions like ALLM (automatic low latency mode) and VRR frame synchronisation for consoles, the list of advantages basically ends there. Aside from these basics, the television offers nothing more that would satisfy those who spend a lot of time in front of a console. It’s a great shame that such a useful tool as Game Bar, which allows for quick control of game parameters in Samsung's higher models, is missing here. In terms of gaming, this model is absolutely basic and is only suitable for "casual" gamers.