Haier Q80FUX vs Hisense E7Q PRO / E79Q PRO

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

When it comes to the quality of the HDR effect, the E7Q PRO is unfortunately not a television that can impress with brightness alone. In real film materials, we measured around 250–300 nits, which is simply too little for HDR to look spectacular. There is a lack of that "spark" in bright details, highlights, and light effects, and in many HDR scenes, it can resemble good SDR more than true cinematic HDR. The consolation in all this is the colours. We managed to confirm that the E7Q PRO is a PFS-type television, meaning it has an additional filter that improves colour gamut coverage. As a result, even if the brightness does not deliver, the colours in HDR content can be appropriately saturated and pleasing to the eye, without the feeling of a "washed-out" image.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which turned out to be the best built-in preset without a doubt. This mode, unlike the Eco, Standard or Dynamic settings, offers the most natural colours straight out of the box. Although no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendering in standard SDR content. The colour palette is very well tuned here, and the errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable televisions. The only drawback we noted in SDR is the tendency to darken some elements of the image, as indicated by the slightly raised gamma graph. The television performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a lack of blue in the white balance. This causes the colours on the screen to be too warm, and for some viewers, they may even seem “too cinematic.” Of course, to improve these parameters, we proceeded with professional calibration.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

In the case of materials with a standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it is worth noting that the E7Q Pro unit we tested was exceptionally well-made at the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different intervention. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We managed to effectively tame the excessive warmth of the image, caused by a factory deficiency in blue colour. After calibration, the colour errors were reduced to a significantly lower level, which will certainly please those who watch a lot of streaming content in HDR format, expecting faithful reproduction.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well and does not dramatically fall behind much more expensive, advanced televisions. Lower-quality materials can look clean and sensible, without the impression that the image is artificially "enhanced." However, the smoothing function presents a bit worse. Indeed, it can be effective and improve tonal transitions in poor quality materials, but at the same time, it can introduce undesirable effects. It sometimes removes grain or adds unwanted artefacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic style of image.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

In the category of smearing and motion fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has included a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as the menu offers more options for smoothing the image. Among other things, we have frame interpolation options, which allow us to adjust the fluidity for sports or films, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.

The E7Q PRO is a phenomenal screen for gamers. Aside from the typical "ache" of Hisense, which is the lack of support for the HGiG format due to permanently active tone mapping, we get practically everything one can expect from a television that is to have a gaming label. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rates, automatic switching to game mode, and support for 4K at 120 Hz. Additionally, all the most important settings are at hand in a clear Game Bar. This tool not only looks modern but also has a typically "gaming" edge and truly makes life easier while gaming.