Haier M95E vs Dreame S100

If there is one category in which the Haier M95E absolutely shines, it is the HDR effect, driven by the raw power of the backlighting. This television cannot be denied the fact that it is a truly bright device. In both most film scenes and during our synthetic measurements, the panel easily achieved, and often even exceeded, the threshold of 1200-1500 nits. This has a direct impact on the viewing experience – the image has a punch and genuinely allows one to feel the magic of materials recorded in this format. However, one must be aware of a certain compromise. When exceptionally demanding scenes appear on the screen, full of small but intense points of light, the M95E does not lose its resonance or dim, but pays a different price for it. A very strong and noticeably distracting halo effect is generated around these bright elements. It is clear here that the algorithms controlling the dimming have been programmed to prioritise brightness and the visibility of the smallest details, even if this comes at the expense of pristine blacks. We are not entirely convinced that this is the healthiest approach; nonetheless, it must be acknowledged that the overall capabilities of the M95E in this regard are indeed significant. A huge advantage is the fact that we are dealing with a Mini LED QLED type construction. The use of a layer of quantum dots brings measurable benefits in the form of wide coverage of the colour palette, which in our tests reached nearly 96% of the DCI-P3 space. This guarantees that the television has full predispositions for displaying vibrant and properly saturated colours.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

Each television is primarily evaluated based on its default cinema mode – in this case, "Movie" – which theoretically should be the "best" and most faithful upon being taken out of the box. Unfortunately, in the case of the Haier M95E, the word "best" is certainly not synonymous with the word "good." Already during SDR viewing, the picture revealed evident problems: white balance skewed too much to red, and excessive, unnatural colour saturation led to visible colour deviations. What’s worse, the M95E also struggles with brightness management (gamma curve), excessively darkening the entire scene. Such behaviour is hard to commend, as it directly leads to details merging into shadows that are irrevocably lost in a black blob.

However, the real disaster occurred after switching to HDR material, while still remaining in "Movie" mode. It’s hard for us to guess who came up with such a fantastic idea – or perhaps it was simply a complete oversight of this stage by Haier's engineers – but instead of cinematic fidelity, the picture began to resemble a garish "Dynamic" mode. The white balance exposed immense problems with the blue colour, which in turn resulted in unnatural sharpening and artificial over-saturation of the entire scene. As if that weren’t enough, the EOTF curve characteristics mercilessly revealed that the television also has fundamental issues with local dimming management in this setting. We have not calibrated many Haier models in our career, but we already know for sure that the M95E definitely needs such calibration.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

The calibration process left us with extremely mixed feelings. On the one hand, we noted considerable success in the area of colour accuracy. By using the available options in the menu, we managed to tame the white balance and bring it down to an acceptable level. As a result, SDR content finally freed itself from the irritating red dominance, and the HDR image no longer resembled a vibrant, shop display mode. We also succeeded in clearly adjusting the entire colour palette and its saturation – perhaps not perfectly, but as much as the software allowed, and the difference was visible to the naked eye.

And unfortunately, this is where our list of improvements essentially ends, as the M95E simply did not allow for more. As we indicated earlier, most settings related to image brightness do not respond to our commands at all. This means that we were unable to grasp its fundamental characteristics in any way – neither the gamma curve nor the EOTF. In practice, the television in SDR content still tends to darken details, as confirmed by the elevated gamma, merging details in the shadows. Meanwhile, the EOTF curve in HDR mode still ruthlessly exposes all the aforementioned problems with chaotic local dimming management. And although the calibration process itself yielded a lot, removing most of the colour issues, in the end, we had to capitulate.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

Well, what happens to those colour connections when a lower quality material full of compression artifacts comes on screen? Unfortunately, we have some bad news for you. Although the menu contains an option responsible for smoothing tonal transitions in older content, we definitely DO NOT RECOMMEND using it. Its activation causes an avalanche of additional, hideous artifacts and noticeably blurs the entire image, and what's funniest – it often doesn't even remove those unwanted "jaggies" it was supposed to fight against. This function might as well not exist at all.

We can write many more positive remarks about the general upscaling process, which raises lower resolutions to the native 4K matrix. The image after upscaling looks really decent – it is neither overly jagged nor artificially smoothed. In this particular matter, the M95E simply performs well.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

In terms of motion fluidity and blur, our feelings are quite mixed, as the M95E is a paradox of a television. Let's start with absolute admiration: at the heart of the device is a 144Hz panel, but what truly impresses is its performance with 120Hz content, which is crucial for sports and console gaming. We must state with full responsibility that Haier has equipped this television with one of the best VA panels currently available on the market regarding the minimisation of blur. It is rare to encounter an LCD panel that offers such clean, sharp, and ghosting-free motion. In this respect, the M95E is simply phenomenal.

And that is precisely why the unpleasant surprise that awaits us on the software side is so painful. It turns out that this fantastic hardware potential is completely underutilised, as the television practically offers no effective options for improving fluidity. The motion smoothing systems that should assist with lower frame-rate content can indeed be found in the Menu, but they essentially do not respond to our settings. The conclusion is brutally simple: if you intend to watch high-fluidity material, you must be sure that the source is broadcasting it at native 120. In every other case, you must accept a rather raw, stuttering image, as the M95E will do nothing to smooth it out.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

When it comes to features for gamers, the Haier M95E presents some very strong arguments. First of all, it is fully ready for the new generation of consoles and powerful PCs. It is equipped with two full-fledged HDMI 2.1 ports, which seamlessly handle 4K signals at 120Hz, and even allow for gameplay at 144Hz. This is the foundation that guarantees us the full use of the potential of our gear. Moreover, the key technologies work flawlessly here. The television flawlessly detects the console and automatically switches to low latency mode (ALLM), so we don’t have to fiddle with the settings. The frame synchronization (VRR) works just as efficiently, eliminating annoying screen tearing when game fluidity slightly drops. Considering the incredibly low motion blur of the panel, which we have already mentioned, the M95E creates a really comfortable and responsive gaming environment. Of course, this is not a perfect package. A dedicated "Game Bar," which is a handy menu for gamers, would be useful, but this is essentially just a nice addition. A more serious failing is the lack of support for the HGiG standard, which complicates the perfect HDR configuration on the console and may lead to overexposures. Despite these shortcomings, the basic "gaming" set that the M95E offers is really solid and fully functional.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.