Haier M90E vs Sony BRAVIA 7 II

Haier M90E is a television that does not lack brightness. In most film scenes, the peak luminance exceeds 1000 nits, which gives the image a distinct 'kick' and high dynamics. It performs really well in typical bright HDR materials. However, one must take into account the aforementioned dimming algorithm. In scenes that are not uniformly bathed in light – for example, when displaying single stars on a black sky – the high brightness highlights imperfections in zone control. Instead of a precise point of light, we often see a pronounced halo effect around bright objects. Despite these shortcomings, the overall image presentation can be pleasing, largely due to the colour reproduction. The manufacturer used a phosphor PFS coating, which allows for a wide coverage of the colour palette. In our measurements, the coverage of the DCI-P3 space reached a solid 95%.

The Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode, Professional, we measured around 2,000 nits of peak brightness, so the panel’s capabilities are truly significant. Of course, with Mini-LEDs a test pattern result is only part of the story, because a lot still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform very well. Depending on the scene, the brightness we measured in films ranged from roughly 1,100 to as much as 1,700 nits. That’s already a level at which HDR has proper punch and bright highlights can be genuinely impressive. It isn’t perfect in every situation, though. With small bright elements on a very dark background the Bravia 7 II clearly favours maintaining good blacks, which can cause their brightness to drop to around 500 nits. It still looks good, but you can see the TV does not always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is precisely where True RGB technology was meant to bring one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured about 98% DCI-P3 coverage and 88% BT.2020, so the potential to show strongly saturated colours is really large. In RGB TVs, however, the situation is a bit more complex. When we repeated the same measurements with a film background applied, palette coverage fell to around 92% DCI-P3 and 78% BT.2020. Those are still good figures, especially for an RGB Mini-LED TV, but they clearly show that the final result largely depends on how the algorithms control the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain high saturation. The biggest differences are visible in shades of blue, where samples begin to deviate more noticeably from reference values and coverage is weaker than for the other primary colours. True RGB therefore offers genuinely greater potential here, but, as with brightness, much depends on what is happening on screen.

For the measurements, we selected the Film mode, which is supposed to offer an image closest to the creators' intentions. Unfortunately, in the case of the M90E, its characteristics – apart from the reduced brightness – differ little from the Dynamic mode. Both in SDR and HDR materials, the image is distinctly tinged with a cool blue hue. The white balance is heavily skewed towards blue, which resembles typical, aggressive 'store' settings. This results in an unnatural representation of skin tones and makes the image fatiguing to the eyes over extended viewing periods. The management of brightness also negatively impacts colour fidelity. The television struggles to maintain proper levels – small details are often too dim, while larger, bright areas of the image suffer from clipping. These deviations in the brightness curve, combined with the cool white balance, lead to very significant colour reproduction errors (DeltaE) in the factory settings.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available settings. However, it is not perfect. In SDR the white balance drifts slightly towards magenta, making some scenes look a little warmer and less neutral than they should. A bigger problem is the gamma, which sits closer to 2.5 than to 2.4. This makes the image a bit too dark in places, particularly in the midtones. In HDR the situation is better. As brightness increases a little too much red appears, but this is not an issue that is highly noticeable during viewing. Overall the Professional mode is a good starting point, although you can get a bit more out of it after calibration.

Haier M90E clearly benefits from professional calibration, particularly with SDR content. The television's menu offers a sufficient number of tools to effectively correct factory errors. We managed to 'tame' the white balance and eliminate the dominant blue tint. We also corrected, though to a lesser extent, the brightness curve (gamma), which allowed us to recover some detail in the shadows that were too heavily dimmed out of the box. The final effect in SDR is a picture that is significantly more natural and pleasant to watch. In HDR mode, the success is only partial. Although we were able to improve the white balance here as well, colour reproduction errors (Color Checker) remained at a high level. Analysis of the EOTF curve (responsible for brightness in HDR) indicates the cause of the problem: the television imposes its own interpretation of the signal and does not provide tools for modifying this curve. The source of the high errors is not the calibration itself, but the specific characteristics of the device – aggressive and imprecise zone dimming interferes with measurements and is 'firmly' embedded in the characteristics of this model.

After calibration the Bravia 7 II can look decidedly better. Above all, we managed to set the white balance very well, both in SDR and HDR. Gamma can also be improved, which after correction runs very close to the reference value. And in fact, for most users these changes will have the greatest impact on the picture. There is, however, a limitation when it comes to the colours themselves. In the Bravia 7 II Sony does not provide access to a classic CMS that would allow us to correct individual hues separately. A lot is therefore left in the hands of the algorithms controlling the True RGB backlight. If the TV misrepresents a particular colour, we are not always able to do anything about it. In our measurements this is most visible in certain reds and blues, where errors can still be quite large. This does not, however, undermine the point of calibration itself. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference compared with the factory settings is noticeable.

The evaluation of the image processor must be divided into two separate aspects, as the Haier M90E behaves inconsistently here. The first issue is the upscaling itself, that is, scaling lower resolution content to 4K. In this task, the television performs quite decently. The algorithms effectively enhance detail, resulting in a relatively sharp, clear, and legible final image. In this regard, it is hard to have major objections to the device.

The situation is completely different with materials that have a high degree of compression, as encountered in older recordings or on platforms like YouTube with lower bitrate. Here, the processor "struggles" with smoothing tonal transitions and masking imperfections in the source. The television fails to hide compression blocks, resulting in a very harsh, "digital" character of the image. The lack of effective artifact reduction can severely discourage viewing lower quality content on this screen.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of the bigger reasons to choose Sony over the competition. The manufacturer has been handling digital image processing well for years, and it shows here too. First and foremost, the 'Smooth Gradation' function works very well and can smooth out weak tonal transitions in lower-quality material. The safest setting is Low, but we would comfortably recommend Medium as well. The effect is stronger then, yet the TV still treats details very gently. Some fine details may be slightly smoothed, but Sony does this much more subtly than many other brands. The upscaling itself also performs very well. Lower-resolution material is well upscaled to 4K, the image looks clean and retains a lot of detail. Of course the TV will not magically turn native HD material into true 4K, but what can be extracted from such a source is handled really well by the Bravia 7 II.

The Haier M90E is equipped with a simple yet functional motion smoothing system (MEMC). In the settings menu, the user will find a three-level adjustment scale: low, medium, and high. This allows for the adjustment of the degree of intervention in the image to one’s own preferences – from gentle smoothing of 24p films to maximum fluidity (the soap opera effect). The system operates stably and fulfills its purpose in typical applications.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you would expect from a TV of this class. With sport or games at 120 fps, the picture is suitably smooth, and for films Sony provides an extensive motion interpolation system. You can therefore adjust the interpolation level separately and decide whether you want to preserve a more cinematic character to the motion or obtain noticeably smoother movement. The issue of motion blur itself is a little worse. The VA panel used is not among the fastest, and you can notice a slight trail behind moving objects, particularly on darker backgrounds. It is not at a level that greatly bothers during normal viewing, but last year’s Bravia 7 fared better in this respect and had a noticeably faster panel.

From a hardware perspective, the Haier M90E is a solid proposition. The television is equipped with two full-bandwidth HDMI 2.1 ports, which supports key technologies: VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). It is also worth noting the proper implementation of the Dolby Vision mode for gaming, which maintains a relatively low input lag. Problems arise with the software configuration. The biggest drawback is the forced, continuous dynamic tone mapping by the television’s processor. This prevents correct HDR calibration from the console using system test patterns (HGiG) – the television ignores source settings and processes the image on its own terms. We also noted shortcomings in the interface: the M90E does not have a typical "Game Bar" (overlay with parameters), which is standard among competitors. Collaboration with Xbox consoles proved problematic with unusual parameters – the device struggles to correctly display a resolution of 1440p at a refresh rate of 120 Hz. Despite the aforementioned software shortcomings, the Haier M90E remains a very appealing screen for gamers. The overall reception is saved by the solid hardware base. The native refresh rate of 144 Hz and the presence of full-fledged HDMI 2.1 ports are advantages that are crucial for everyday use. If we are looking for a television that ensures high fluidity and supports 4K signal, this model will fulfil its task.

Bravia 7 II has basically everything you’d expect today from a good console TV. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to a low-latency mode. It also has properly working HGiG, which means that after configuring HDR on the console the TV won’t try to brighten the image further on its own. You just need to remember to turn off tone mapping in the TV’s menu. Dolby Vision in game mode is also a plus, especially useful for Xbox owners. Sony adds its own Game Menu. From it you can quickly check key signal information, verify VRR operation or change gaming-related settings without digging through the whole TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz.

Our biggest reservation is not really about the functions themselves, but about the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 at 48 Gbps. One of those is also an eARC port. So if you connect a soundbar or AV receiver to the TV via HDMI, in practice you’re left with only one full HDMI 2.1 for a console or PC. With a single console that’s no problem, but with a PS5, an Xbox and an audio setup it starts to get tight. And this is hard to excuse for Sony. In cheaper TVs two HDMI 2.1 ports can still be acceptable, but in a model of this class, especially in 2026, we would expect a full set of four such ports.