Blaupunkt UGC5500S vs Hisense UR8S

Here, too, we will not mince words – if you are looking for a television strictly for cinematic experiences in HDR, you have come to the wrong place. The Blaupunkt UGC5500S is unfortunately not a machine designed for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on film scenes speaks for itself. It is simply too little to even talk about any real HDR effect. Quite frankly, everything displayed here in this format can be confidently regarded as a somewhat “enhanced” SDR mode. We expected this, as virtually every device in this price range falters in this area, but we feel obliged to warn you about it. Manufacturers love to boast about HDR compatibility with stickers on their boxes, but in reality, this format simply does not exist here – it lacks the “fuel” of brightness.

The situation is particularly difficult for Blaupunkt, as we are dealing with a panel that has a very basic coverage of the DCI-P3 colour palette, reaching only about 80%. You will not find any advanced coatings to extend these capabilities (such as quantum dots), which means that scenes that should ideally burst with richly saturated colours appear simply under-saturated on this screen. Therefore, we have a specific piece of advice for you: do not force the HDR mode on this model. If you have the option in the streaming app settings – simply turn it off. By sticking to the classic SDR mode, you can be sure that the television will not attempt to “enhance” something that it cannot handle hardware-wise.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern peak brightness reached around 2200 nits. That’s a very good result, but as always what’s much more important is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes, where there’s a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has plenty of punch. It’s worse with small bright elements on a dark background. The TV clearly dims them to keep good blacks and to prevent excessive bloom. As a result things like single stars or tiny reflections can be only around 200 nits. And here HDR is no longer as impressive. So you can see that the local dimming algorithm works effectively, but it also has its cost: sometimes it simply sacrifices the brightness of small details in favour of contrast.

Colours

With RGB Mini-LED TVs colours should be judged a little differently than usual. If we look solely at the panel’s native capabilities, the UR8S performs excellently. We measured around 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs and this is where the potential of the RGB backlight is most obvious. The problem is that this potential is not always realised in real scenes. When we ran the same measurements on test patterns with a film background applied, saturation of some colours began to fall noticeably. Individual zones are not always able to control the three RGB components so precisely when the scene becomes more complex. This is most visible with blue and magenta. On simple test patterns they can look very strong, but in more demanding scenes samples of those colours visibly shrink. So the UR8S’s capabilities are enormous, it’s just that the TV cannot fully make use of them in every scene.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, in short, twofold. Once again, we need to clearly separate what we see in standard SDR format from what happens when HDR is turned on, as these are two entirely different worlds. Let’s start with the better side of the coin. If you plan to watch classic television, YouTube, or older films on this television, you can count on really reasonably well-tuned colours. In our test unit, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being overly optimistic, we did notice some shortcomings. Looking at the gamma charts, we observed that the processor struggles with appropriately dimming the image in its brightest areas. Additionally, there is quite a strong, at times excessively aggressive red saturation, which resulted in visible errors in reproducing certain shades. Nevertheless, in general terms, the image in SDR is simply solid and can be watched without a grimace on one’s face. Unfortunately, the charm disappears the moment we again enter the HDR world. Here, Blaupunkt behaves as if we suddenly switched it to shop mode, and in its worst version. The excess blue in the white balance is so significant that it is almost blinding, ruining any realism of the scene. Moreover, the television interprets brightness very loosely, which, when analysing the EOTF curve, clearly showed that for most of the time, the colours appear simply washed out and lacking in depth. This is, by the way, perfectly visible through the colour errors that become evident in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which feels forced and lacking appropriate refinement.

For assessing the out-of-the-box colours we used Filmmaker mode, which is intended to show an image that is as close as possible to how the material was prepared. Looking at the white balance alone, the UR8S performs quite well. There is no strong tint that immediately jumps out, although as brightness increases a little too much blue and red start to appear, with a simultaneous shortfall of green. Colour errors therefore show up in measurements, but the image itself does not look bad. We have far greater reservations about how the UR8S manages picture brightness. In SDR the gamma sits around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the picture is too bright, especially in the midtones. Shadows are lifted too much, causing the image to lose some depth. A similar tendency is visible in HDR. The EOTF curve is above the reference value for a large part of its range, so the UR8S again brightens the image more than it should. This is not due to a lack of brightness — the TV has plenty — but to the way it manages that brightness. As a result, HDR content can look very striking, but not always precisely as it should.

It may sound like a joke – pulling out professional measuring equipment for a television costing around a thousand złotys / 250 dollars, but we wouldn’t be ourselves if we didn’t check it out. The question is: does such cheap equipment give us any room for manoeuvre when it comes to calibration? To your surprise, the answer is: yes, and very much so. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to really work on the picture. These are not just empty sliders; they are specific tools that we could utilise using our measuring sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial red saturation. We also fixed the issue of improper dimming in the brightest parts of the image. After calibration, the standard format image became significantly more balanced and simply correct. When it came to HDR, the situation was again more complicated. While we managed to 'tame' that aggressive blue tint in the white balance, it was clear that we were fighting somewhat in vain. Even after adjusting the settings, the television still tried to interfere with the image in its own way, as if the electronics knew better than us how the scene should look. Additionally, there is a hardware barrier that no slider can overcome – colours in HDR still remain under-saturated. This is simply due to the quality of the panel itself; it physically cannot produce the most vibrant colours. To sum up this topic: if any of you ask whether it is possible to calibrate a television for a 'thousand', we answer with full conviction: it is possible.

Hisense provides plenty of calibration options and, in SDR, these can yield a very good result. After calibration, the white balance is practically even across the entire range, and colour errors fall to very low values. The UR8S can be adjusted very precisely here. HDR is somewhat different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations begin to appear. The most interesting aspect, however, is the behaviour of the EOTF curve. Even after it has been correctly set on test patterns, the UR8S still tends to interpret brightness in its own way when watching films. Depending on the scene, parts of the image are slightly brightened while others are dimmed relative to how they should appear. This shows that the algorithms controlling the local dimming have a significant influence on the final image. Calibration therefore allows colours to be improved very effectively, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

If you expect the processor in this model to magically "fix" the poor-quality signal from cable TV or old films from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this adequately in that the image is not blurry, but there's no mention of any intelligent sharpening or adding details here. Worse still, Blaupunkt is completely devoid of any features for reducing unwanted tonal transitions. If the material being watched has what is known as banding (that is, ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display it in all its glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly enlarges the frame, causing us to lose details at the very edges of the screen. In summary: in the category of digital "enhancing" of images, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

A big plus of the UR8S is the use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model's stronger points. The TV handles smoothing tonal transitions very well, especially with lower-quality content. The feature responsible for this effect works effectively without overprocessing the picture. Even on the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image is not overly sharpened. The UR8S simply copes very well with a weaker signal, and in this respect it is one of its most notable strengths.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us were expecting an impeccably sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won't find any digital motion smoothers in the menu. The manufacturer has not given us any room for manoeuvre – nothing can be smoothed out or adjusted to our personal preferences. The image is always "raw," and we receive it exactly as the source transmits it. For fans of cinematic "jumping" of the image, this might be good, but the rest of us simply have to get used to the lack of any motion enhancement.

The UR8S is equipped with a panel with a native 180 Hz refresh rate, so right from the start it offers excellent motion handling. The panel itself performs really well here, although some limitations typical of VA panels are still visible. Motion blur is relatively minor for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

When it comes to gaming on the Blaupunkt, we weren't expecting miracles, and indeed – the list of features is not very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first plus is that the TV quickly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low-latency mode. This is convenient because you don't have to fiddle with settings each time to prevent input lag from ruining the fun. The second point is a genuine surprise that caught us off guard. Although it has a 60 Hz panel, the Blaupunkt can display images at 120 Hz at Full HD resolution. Sure, you lose the details of 4K, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an inexpensive device. Besides these two points, you won't find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. This is a simple screen for occasional gaming.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you can expect from a modern console or PC display. It offers ALLM, VRR and 4K at 120 Hz. There is also Dolby Vision in Game Mode, so when using, for example, the Xbox Series X you do not have to give up that HDR format. PC gamers get even more options. The panel can run at 4K at 180 Hz, and dropping to Full HD can raise the refresh rate to as much as 330 Hz. There is also a Game Bar that lets you quickly check key information and change gaming-related settings. The only clear omission is a correct implementation of HGiG. With it enabled the TV still alters HDR brightness mapping, so we do not get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.