Blaupunkt UGC5500S vs Dreame S100

Here, too, we will not mince words – if you are looking for a television strictly for cinematic experiences in HDR, you have come to the wrong place. The Blaupunkt UGC5500S is unfortunately not a machine designed for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on film scenes speaks for itself. It is simply too little to even talk about any real HDR effect. Quite frankly, everything displayed here in this format can be confidently regarded as a somewhat “enhanced” SDR mode. We expected this, as virtually every device in this price range falters in this area, but we feel obliged to warn you about it. Manufacturers love to boast about HDR compatibility with stickers on their boxes, but in reality, this format simply does not exist here – it lacks the “fuel” of brightness.

The situation is particularly difficult for Blaupunkt, as we are dealing with a panel that has a very basic coverage of the DCI-P3 colour palette, reaching only about 80%. You will not find any advanced coatings to extend these capabilities (such as quantum dots), which means that scenes that should ideally burst with richly saturated colours appear simply under-saturated on this screen. Therefore, we have a specific piece of advice for you: do not force the HDR mode on this model. If you have the option in the streaming app settings – simply turn it off. By sticking to the classic SDR mode, you can be sure that the television will not attempt to “enhance” something that it cannot handle hardware-wise.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, in short, twofold. Once again, we need to clearly separate what we see in standard SDR format from what happens when HDR is turned on, as these are two entirely different worlds. Let’s start with the better side of the coin. If you plan to watch classic television, YouTube, or older films on this television, you can count on really reasonably well-tuned colours. In our test unit, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being overly optimistic, we did notice some shortcomings. Looking at the gamma charts, we observed that the processor struggles with appropriately dimming the image in its brightest areas. Additionally, there is quite a strong, at times excessively aggressive red saturation, which resulted in visible errors in reproducing certain shades. Nevertheless, in general terms, the image in SDR is simply solid and can be watched without a grimace on one’s face. Unfortunately, the charm disappears the moment we again enter the HDR world. Here, Blaupunkt behaves as if we suddenly switched it to shop mode, and in its worst version. The excess blue in the white balance is so significant that it is almost blinding, ruining any realism of the scene. Moreover, the television interprets brightness very loosely, which, when analysing the EOTF curve, clearly showed that for most of the time, the colours appear simply washed out and lacking in depth. This is, by the way, perfectly visible through the colour errors that become evident in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which feels forced and lacking appropriate refinement.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

It may sound like a joke – pulling out professional measuring equipment for a television costing around a thousand złotys / 250 dollars, but we wouldn’t be ourselves if we didn’t check it out. The question is: does such cheap equipment give us any room for manoeuvre when it comes to calibration? To your surprise, the answer is: yes, and very much so. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to really work on the picture. These are not just empty sliders; they are specific tools that we could utilise using our measuring sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial red saturation. We also fixed the issue of improper dimming in the brightest parts of the image. After calibration, the standard format image became significantly more balanced and simply correct. When it came to HDR, the situation was again more complicated. While we managed to 'tame' that aggressive blue tint in the white balance, it was clear that we were fighting somewhat in vain. Even after adjusting the settings, the television still tried to interfere with the image in its own way, as if the electronics knew better than us how the scene should look. Additionally, there is a hardware barrier that no slider can overcome – colours in HDR still remain under-saturated. This is simply due to the quality of the panel itself; it physically cannot produce the most vibrant colours. To sum up this topic: if any of you ask whether it is possible to calibrate a television for a 'thousand', we answer with full conviction: it is possible.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

If you expect the processor in this model to magically "fix" the poor-quality signal from cable TV or old films from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this adequately in that the image is not blurry, but there's no mention of any intelligent sharpening or adding details here. Worse still, Blaupunkt is completely devoid of any features for reducing unwanted tonal transitions. If the material being watched has what is known as banding (that is, ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display it in all its glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly enlarges the frame, causing us to lose details at the very edges of the screen. In summary: in the category of digital "enhancing" of images, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us were expecting an impeccably sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won't find any digital motion smoothers in the menu. The manufacturer has not given us any room for manoeuvre – nothing can be smoothed out or adjusted to our personal preferences. The image is always "raw," and we receive it exactly as the source transmits it. For fans of cinematic "jumping" of the image, this might be good, but the rest of us simply have to get used to the lack of any motion enhancement.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

When it comes to gaming on the Blaupunkt, we weren't expecting miracles, and indeed – the list of features is not very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first plus is that the TV quickly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low-latency mode. This is convenient because you don't have to fiddle with settings each time to prevent input lag from ruining the fun. The second point is a genuine surprise that caught us off guard. Although it has a 60 Hz panel, the Blaupunkt can display images at 120 Hz at Full HD resolution. Sure, you lose the details of 4K, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an inexpensive device. Besides these two points, you won't find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. This is a simple screen for occasional gaming.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.