Xiaomi S Pro 2026 vs Blaupunkt UGC5500S

When it comes to HDR quality, the Xiaomi S Pro 2026 is undoubtedly a very bright television. On our synthetic measurement patterns, we were able to achieve peak brightness of around 1400 nits. This result is not only very good but quite spectacular, considering the price of this model. However, as we always say, our editorial team values measurements and the viewing experience of content that people watch on a daily basis – from movies to series. So let’s analyse how Xiaomi performs with film material. The result is, unfortunately, quite mixed. When very bright scenes appear on screen, the S Pro 2026 truly shows its full capabilities and can achieve a real 800-1000 nits on bright elements. Moreover, even smaller objects can "burn" the eyes – in scenes from the movie Sicario 2, small metallic parts of the helicopter were really vivid. The problem is – and here the story comes full circle, returning to our contrast assessment – that in such scenes, we can’t count on absolutely cinematic black. In our opinion, this compromise is too significant; the high visibility of details in bright sections should not come at the expense of such a substantial drop in blacks. And even though the HDR effect can create a stunning impression here, it’s important to remember that when very challenging, mixed scenes appear on screen, we may feel a slight disappointment. Precisely the one we mentioned in the previous paragraph regarding issues with dimming in HDR mode. As a consolation, it’s worth adding that the S Pro 2026 is equipped with an additional PFS filter (similar in function to a QLED layer), which effectively broadens the colour gamut coverage. As a result, measurements showed DCI-P3 coverage reaching 94%. This gives us confidence that in most colourful scenes, the image will look rich and properly saturated.

We won’t beat around the bush here – if you’re looking for a TV strictly for cinematic HDR experiences, then you’ve come to the wrong place. Unfortunately, the Blaupunkt UGC5500S is not a machine built for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on movie screens speaks for itself. It’s simply too little to even consider any real HDR effect. To be honest, everything displayed in this format can confidently be seen as a somewhat “enhanced” SDR mode. We expected this, as practically every device in this price range falls short in this area, but we feel it’s our duty to warn you. Manufacturers love to brag about HDR compatibility on the boxes, but in reality, this format simply doesn’t exist here – it lacks the “fuel” in the form of brightness.

The situation is further complicated for Blaupunkt, as we’re dealing with a panel that has very basic coverage of the DCI-P3 colour gamut, reaching only about 80%. You won’t find any advanced coatings to expand these capabilities (like quantum dots), which means scenes that are supposed to burst with richly saturated colours appear simply underwhelming on this screen. Therefore, we have a particular piece of advice for you: don’t force HDR mode on this model. If you have the option in the streaming app settings – just turn it off. By sticking to the classic SDR mode, you’ll be sure that the TV won’t try to “enhance” something that it can’t handle hardware-wise.

Of course, all our measurements were conducted in "Film" mode, which is typically the best and most faithful choice we get straight after taking the TV out of the box. And to put it bluntly: while this is the best mode, it is still very far from perfect. Above all, the TV has a clear tendency to give the picture a cool, blueish tint – this is due to poorly set colour balance. Additionally, there is the issue of how the S Pro 2026 manages its brightness straight out of the box, which results in an over-saturated image. These two flaws contribute to really significant colourimetric errors (Delta E). In HDR content, they could double exceed our expected error scale of "10" (i.e. reaching values close to 20). Just to remind you – the threshold of perceivable error by the human eye is a Delta E value of around 3. Results at the level of 20 mean that the image significantly deviates from what the director intended.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, to put it simply, twofold. We must once again clearly separate what we see in the standard SDR format from what happens when HDR is switched on, as they are two completely different worlds. Let's start with the better side of the coin. If you're planning to watch traditional TV, YouTube, or older films on this television, you can count on really well-tuned colours. In our test sample, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being too rosy, we noticed some drawbacks. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest areas. Additionally, there is quite a strong, at times overly aggressive, red saturation, which resulted in visible errors in reproducing certain shades. Despite this, overall, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst rendition. The excess blue in the white balance is so significant that it’s glaring, ruining any realism in the scene. Furthermore, the television interprets brightness very loosely, which, upon analysing the EOTF curve, clearly showed that for most of the time, colours simply appear washed out and lacking depth. This is also perfectly evident in the colour errors that become apparent in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which seems to be forcefully added without proper refinement.

So how does the S Pro 2026 perform after our calibration process? We must admit that after calibration, the TV becomes a really enjoyable device for watching everyday content. As you can see in the charts, in HD (SDR) material, both white balance and gamma values have been brought to nearly perfection. Most importantly, colourimetric errors have become practically invisible to the human eye. In this scenario, the S Pro 2026 is simply a great TV that, after professional calibration, can provide a lot of joy from viewing. However, it is worth noting clearly – our efforts did little to help in 4K HDR mode. Despite the calibration, the TV still interprets the image quite strongly in its "own way," which is clearly evident in the measurement of the EOTF curve (brightness tracking). It's a bit of a shame because it shows that the problem lies not with the panel itself, but with the software. Poorly refined image management algorithms in HDR content can, unfortunately, rule this TV out for many more discerning users.

It may sound like a joke – pulling out professional measuring equipment for a TV that costs around a thousand złoty / 250 dollars, but we wouldn’t be ourselves if we didn’t check it. The question is: does such cheap gear give us any leeway in terms of calibration? To your surprise, the answer is: yes, absolutely. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to effectively work on the picture. These aren't just empty sliders; these are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the issue with the incorrect dimming of the brightest parts of the image. After calibration, the picture in standard format became significantly more balanced and simply correct. When it comes to HDR, the situation was more complicated again. While we managed to “tame” that aggressive blue tint in the white balance, it was clear that we were fighting a bit of a losing battle. Even after changing the settings, the TV still tried to interfere with the picture in its own way, as if the electronics knew better than we did how the scene should look. To top it off, there's the hardware barrier that no slider can overcome – colours in HDR still remain undersaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vivid colours. To summarise this point: if any of you ask whether it’s possible to calibrate a TV for “a grand”, we respond with complete conviction: it is possible.

Let's start with the issue we raised in the previous paragraph: can a TV even fix the problem of terrible tonal transitions in dark scenes? Theoretically yes – in the menu, we find a feature with the promising name "Colour Contour Removal." Well, "theoretically." Unfortunately, in practice, this setting – regardless of which of the three power levels is chosen – yielded absolutely no real results. So we are dealing with a feature that practically only exists in the menu. Moving on to the quality of upscaling (scaling from a lower resolution to 4K), unfortunately, we have more bad news for you. The S Pro 2026 handles this task very poorly. Interestingly, the phenomenon of "overscan" (slight image cropping) is not a major issue here. The problem is that the TV simply shows a very raw, unprocessed image. Its attempt to boost the signal to a higher resolution looks simply dull and lacks any "intelligent" enhancement. There's no denying it – the entire digital image processing is the true Achilles' heel of this model.

If you're hoping that the processor in this model will magically "fix" the poor quality signal from your cable TV or old movies from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no mention of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions to reduce unwanted tonal transitions. If the material being viewed shows what is known as banding (ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display them in all their glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly zooms in on the frame, causing us to lose details that are at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

On paper, the specifications of the S Pro 2026 look impressive. The television is equipped with a native 144 Hz panel, capable of displaying images at up to 288 Hz in a dedicated gaming mode. These are incredible results, but what we were most interested in, in the context of everyday use, was how the TV handles motion blur and how the picture looks at 120 Hz. After all, this is the frequency used today by consoles such as the PlayStation 5, Xbox Series X/S, and it is desirable for sports fans. Generally, the panel "holds up". The matrix is quick enough to meet these challenges, and objects displayed at a native smoothness of 120 Hz are rendered correctly. When it comes to software, the TV is equipped with motion smoothing technology, but with a key caveat – it only works for input signals up to 60 Hz. This means it's mainly suitable for traditional TV, movies, and series. With it, we can adjust the smoothness of the picture to our own preferences – ranging from a very smooth, "theatrical" approach, to setting the slider at "zero" and maintaining a fully cinematic character.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won’t find any digital motion smoothers in the menu. The manufacturer hasn’t given us any room for manoeuvre – nothing can be smoothed out or the image adjusted to our personal preferences. The picture is always "raw" and we receive it exactly as it is transmitted by the source. For fans of cinematic "jumping" images, this might be good, but the rest simply has to get used to the lack of any motion enhancement.

For gamers, the Xiaomi S Pro 2026 is on paper an almost perfect proposition. It has been equipped with two HDMI 2.1 ports, which allow us to unlock (although these options are somewhat hidden in the menu) the full suite of features: ALLM, VRR, and, crucially, the ability to operate in 4K at 144 Hz. This last feature should particularly please owners of powerful PCs. The TV also has something resembling a gamer panel – and while it’s hard to call it a full-fledged "Gamebar," it does its job by displaying key information. It’s just a shame that in its default form, it covers a relatively large part of the screen.

The biggest problem we have with this model, however, concerns how the S Pro 2026 handles games in HDR mode. To put it bluntly: it doesn’t handle it well. Due to the poorly implemented HGiG feature (the HDR tone mapping standard for games), during the initial HDR calibration on the console, it’s very easy to "blow out" the image. If someone is unaware of this software flaw and follows the on-screen instructions, they will simply set the picture incorrectly, with burnt-out details in bright areas. Another significant issue is the Dolby Vision mode for games. While it works, it generates such a high input lag that it becomes noticeable in dynamic titles. (You can check all our lag measurements in the paragraph below). In summary: Generally, this is a really very good screen for gamers, but with one small caveat. We would rather avoid HDR mode on it – unless we decide to manually set the brightness slider on the console "by eye," completely ignoring the tips from the console's pictogram.

When it comes to gaming on the Blaupunkt, we weren’t expecting miracles and indeed – the list of features isn’t very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first advantage is that the TV quite smoothly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low latency mode. This is convenient because you don’t have to fiddle with settings every time to ensure input lag doesn’t spoil the fun. The second point is a real curiosity that surprised us. Despite it being a 60 Hz panel, the Blaupunkt can display a 120 Hz image at Full HD resolution. Sure, we lose 4K details, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an affordable device. Other than these two points, you won’t find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.