XIAOMI S Mini 2026 (55"-75") 60Hz vs Hisense U7S / U77SE

When it comes to HDR, the Xiaomi S Mini 2026 performs really well, especially given the segment this model sits in. The TV can reach around 1000 nits of brightness without much difficulty, so in bright scenes it can deliver a very pronounced HDR effect. The sun, highlights or very brightly lit parts of the picture can be intensely bright and at times really hit you with their intensity. It’s a bit different in dark scenes, though. Very small light sources surrounded by black are rendered at much lower brightness, so they lack the pinpoint intensity seen on the best TVs. That’s not unusual for a Mini LED. The local dimming algorithm reduces the backlight in those cases to preserve as deep a black as possible, which in such scenes matters more than a few extra nits.

HDR colours

Colour reproduction also fares well. Xiaomi markets the S Mini 2026 as a QLED TV, although the solution used here is in practice based on a PFS phosphor. What matters is the result, and that is pretty good. Measured DCI-P3 gamut coverage was around 94%, while in the much wider BT.2020 colour space it was about 74%. That means the TV can show most of the colours used in HDR movies with suitably high saturation. Its limitations are most noticeable with very intense shades of green, where the colour range begins to run out.

The Hisense U7S has considerable HDR potential, but it can’t make full use of it in every scene. On a test pattern it reaches about 1100 nits, so the backlight is genuinely strong. In our brighter film scenes we measured around 640 to 745 nits. That’s still enough for the sun or bright highlights to have a distinct bloom and to show an advantage over SDR material. When the TV needs to light a larger portion of the image, it handles it quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area considerably larger than a tiny point on the screen. If the TV were to drive such a zone strongly, it would brighten the surrounding area along with the light. Hisense tries to avoid that and dims the whole zone. Blacks look better as a result, but a small bright object that should draw the eye also loses intensity. That’s why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small highlights are noticeably muted. The U7S therefore prioritises keeping deep blacks, even at the expense of bright details. With this number of zones it’s an understandable compromise, but it’s worth remembering that the peak 1100 nits tells us about the backlight’s capability, not how brightly the TV will show every element of a film.

Colours

Hisense markets the U7S as ULED, but that’s a marketing name; the wider colour gamut here is achieved by a PFS phosphor backlight. In our measurements the TV covered about 91% of the DCI-P3 space and 71% of BT.2020. Those are good results, though a little short of the best screens on the market. The biggest shortfall is in green — the TV doesn’t even reach the DCI-P3 boundary there, so the most intense green hues will be less saturated than they should be. Most colours in HDR films and series still look suitably vivid, however. A positive is the repeatability of the results: gamut coverage on test patterns and in film scenes is practically identical.

We tested the Xiaomi S Mini 2026 (55–75 inch models) in Film mode, which compared with the other presets offered the most accurate colours. That did not mean the image was correctly set up straight away. In our unit the white balance was noticeably shifted toward warmer tones. There was too little blue and too much red, giving whites and greys a slightly warm cast. The TV also tended to brighten darker parts of the image too much. This was due to the gamma, which instead of staying around 2.4 fell in places to about 2.0. That made shadow detail more visible, but the image lost some depth. So the factory settings weren't bad, but they still needed some adjustment to reproduce the picture accurately.

Factory colours on the Hisense U7S are decent, but there are a few things to fix. In SDR the white balance favours red, so the image looks too warm, in places with a slightly pink tint. You can see this on faces and bright, neutral surfaces. Gamma also runs below the target, so the TV brightens the image, especially in darker areas. That makes it easier to see shadow detail, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral, with midtones lacking blue and the brightest parts lacking red. A bigger problem is the way brightness is reproduced. The EOTF curve shows that a large portion of the midtones is boosted, making the image appear brighter than the source material intends. Color Checker measurements also fare worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colours can therefore look attractive, but they're not always faithful to what we should be seeing. There’s room for improvement and we’ll see how much can be corrected with calibration.

Surprisingly, the Xiaomi S Mini 2026 responds quite well to calibration. After our adjustments we were able to noticeably improve the white balance and the picture stopped leaning toward overly warm tones. In SDR material the result is really good, with the TV able to reproduce such content very accurately and hard to fault for colour reproduction. We made similar adjustments in HDR, although not everything could be corrected there. Colours look better than on the factory settings, but the TV still tends to display the picture a little brighter than it should. You can see this from the EOTF curve, which sits above the reference. In practice this means some HDR scenes are brighter than the creators intended. It's a quirk of this TV and we can't do anything about it.

Calibrating the Hisense U7S did the most for SDR content. We managed to even out the white balance, so the earlier warm tint is gone and whites and greys look neutral. Gamma now sits very close to the reference, so the TV no longer brightens the image unnecessarily and darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors are below 2. For watching regular TV and SDR films, this delivers a really well calibrated picture. Calibration in HDR wasn’t as smooth. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the film’s brightness a bit on its own. It brightens parts of the image and, depending on the scene and local dimming, can tone down the brightest elements. That couldn’t be eliminated by calibration. This also shows up in the Color Checker results, where many errors remain around 3–4 and some exceed 7. In SDR the result is therefore very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

The MT5896 processor handles digital image processing in the Xiaomi S Mini 2026. Unfortunately, in this respect the TV is fairly average. Low-resolution content isn't upscaled very well, and its limitations become obvious on a large screen. The picture looks quite digital, and the TV can't pull out many extra details. You also can't turn off overscan for low-resolution content. The handling of posterisation smoothing is even worse. On the smaller models there's not even a separate setting to reduce the visible banding between similar shades. So if those imperfections are already present in the source material, Xiaomi effectively doesn't mask them.

The processing of lower-quality material in the Hisense U7S is fairly average. The Pentonic 700 chipset used here doesn't cope particularly well with the effects of heavy compression. There's a "Smooth and Gradient Picture" function in the menu, but its performance leaves a lot to be desired. At the low setting it's hard to see any improvement in tonal transitions, though at least the picture doesn't suffer. Medium and high settings still don't remove visible banding between tones and begin to blur details; in our clips parts of characters' faces even vanished. Interestingly, film grain remains untouched at every level. If you do use this function, stick to the low setting. Its current performance needs refinement, but that's mainly down to the processor used here.

Upscaling to 4K performs much better. Lower-resolution content gains clarity, edges are well reproduced and fine details look sharp. That doesn't mean the TV can recover details that weren't in the recording, but it makes good use of what's provided by the source. Another plus is the lack of edge cropping, even with an SD signal.

The smaller variants of the Xiaomi S Mini 2026 use a 60 Hz panel, and that's their biggest limitation when it comes to motion. For films and TV series this isn't yet a major problem, because the TV has a classic motion interpolator for 24/30 fps material. So you can reduce the characteristic judder and adjust motion to your own preferences. Sports and other 50/60 Hz material fare worse, because there’s no additional feature to improve smoothness. In such content we’re therefore limited by the panel itself.

In terms of motion blur the TV performs fairly typically for a VA panel. The most trailing is visible behind objects moving against a dark background, while in brighter scenes the effect is noticeably smaller. It’s not at a level that completely ruins the perception of motion, but in dynamic scenes you can see that the panel isn’t one of the fastest.

Motion handling on the Hisense U7S is decent thanks to its 144 Hz refresh rate. For films there's also a motion smoothing option with adjustable judder and blur reduction. You can keep a more cinematic feel to motion or increase smoothness if choppy camera pans bother you. High refresh is also useful for sport and gaming, but unfortunately it doesn't solve the panel's biggest problem.

The issue is pixel response time. Fast-moving objects leave long, distinct trails, as our UFO test shows. It's worst on dark backgrounds, where the trail is particularly pronounced. So motion can be smooth, but the moving object loses sharpness, and that difference on the U7S is fairly easy to spot.

In the larger sizes the Xiaomi S Mini 2026 becomes a far more interesting option for gamers. The panel runs natively at up to 144 Hz, so when you connect a PC you can use the high refresh rate even at 4K. At lower resolutions the TV can go even further, reaching up to 288 Hz. It also offers ALLM, automatic switching to Game Mode, and a Game Bar that keeps the most important settings within easy reach. Of course, the TV has two full-bandwidth HDMI 2.1 ports. So in terms of smoothness the difference compared with the 55–75 inch versions is substantial and particularly easy to notice when using a PC or console. However, not everything works perfectly. As with the smaller variants, we have reservations about the HGiG implementation. The HDR setup screens on the PS5 and Xbox don't precisely reflect the TV's actual capabilities, so if you set the console according to those prompts the brightest parts of the image can be blown out and lose some detail.

The Hisense U7S has plenty to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz in Full HD, 1440p and 4K, so modern consoles’ capabilities are well utilised. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a lot of choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate doesn’t eliminate. VRR and ALLM are present as well. VRR helps keep the picture tear-free when a game’s frame rate changes. ALLM automatically switches the TV into game mode, so you don’t have to go into the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision at 120 Hz. Importantly, that format does not cause significant input lag here. The Game Bar also looks great. It’s clear and attractive, and lets you quickly check what signal the TV is receiving. Handy gaming settings are close to hand too, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the whole menu.

Our biggest complaint is HGiG. Hisense keeps doing its own tone mapping, which makes setting up HDR on the console confusing. You adjust the checkerboard pattern, and the TV continually alters its appearance. As a result, the point at which the pattern disappears does not correctly indicate the display’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR brightness on the console to around 900 to 1000 nits, rather than rely on the configurator.