XIAOMI A PRO 2026 vs Samsung S85H

If you're counting on the cinematic HDR experience in the new Xiaomi A Pro 2026, it's best to temper your expectations. This TV is simply too dim to fully realise the potential of contemporary films or series designed for the highest quality image. Our measurements showed brightness levels in the range of 200–300 nits, which are values that are more suited to SDR content than to ambitious HDR productions. In practice, this means that while most films look decent, they certainly won't evoke the 'wow' effect that other TVs do. Fortunately, not everything is lost – credit has to be given to the PFS LED filter used here, a solution similar to the quantum dot technology found in QLEDs. Thanks to this, the coverage of the DCI-P3 colour palette reaches about 94%, resulting in vibrant, saturated colours in the vast majority of materials.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 lineup. In the same film scenes last year’s model sat closer to about 700 nits, while the S85H can reach roughly 800 nits. That’s not a change that completely transforms the HDR experience, but the extra headroom is noticeable, especially with point highlights, reflections or stronger special effects. Around 800 nits is a very good result for an entry-level OLED and in most films it’s enough for HDR to have the necessary punch. Bright elements can clearly stand out against perfect blacks, and that contrast is still doing most of the work here. However, you need to remember the typical limitation of OLED technology. When a very bright scene covers a large portion of the screen, brightness can drop to almost half. This is the result of panel protections that limit its output with large bright areas.

Colours

The S85H can deliver very pleasant, saturated colours and in most HDR films it looks really good in that regard. We measured around 95% coverage of DCI-P3, so the palette most commonly used in films is reproduced to a very high degree. Skin tones, greens and stronger reds still have appropriate intensity and under normal viewing it’s hard to have major complaints. Only when you look more broadly at BT.2020 do the limitations of the new WOLED SE panel become apparent. Coverage was about 70%, a bit less than WOLEDs of the previous generation and noticeably less than QD-OLED panels. In films this isn’t a big loss, since most productions rarely use such heavily saturated colours. You’re more likely to notice it in games, where developers more often opt for more intense colours.

What we saw in Filmmaker mode really surprised us – and unfortunately not in a good way. The mode advertised as the Hollywood standard resembled more of a display in a shop window. The white balance was shifted towards blue, which led to massive colour errors and the effect of blown-out scenes in SDR content. It was a bit better, though far from perfect, in HDR materials. There were also problems there – colour saturation and the entire palette consistently drifted towards cooler tones, resulting in an image that had an artificial, cold tint rather than a cinematic character. In other words: even in Filmmaker mode, which should be the showcase of this television, we got an effect far from expectations.

To evaluate colours we of course used Filmmaker mode, and in SDR our S85H unit was set very well from the factory. The largest deviation appears in the white balance, where as brightness increases it starts to lose a bit of blue. In practice this means whites and greys have a slightly warmer tint than they should. However, it's not a big fault and during normal viewing it generally isn't very noticeable. Gamma also stays close to the reference value, so the picture is neither overly bright nor unnecessarily dim. The S85H's SDR picture therefore looks really good straight out of the box. A few more imperfections appear in HDR. Here the white balance shifts more with rising brightness, with blue starting to dominate and the red component clearly lacking. This also results in larger errors in some colours. These aren't yet colour errors that completely change the character of the picture, but in direct comparison with the reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

Even though Xiaomi isn't a brand associated with top-tier televisions, it's fair to say that even in a budget model like the A Pro 2026, the manufacturer left plenty of calibration settings. After a few adjustments, the SDR picture took on a completely new look. The colours stopped veering into blue tones, the whites gained a sense of naturalness, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was a slightly different story with HDR materials. Here, it was immediately noticeable what we had already mentioned – the overexposure of bright scenes and issues with balance control. Calibration helped only partially, as the limitations of the panel itself were at play. However, it must be emphasized that in the case of SDR, the television changed beyond recognition, and definitely for the better.

Calibration delivers really good results on the S85H. First and foremost, we were able to set the white balance almost perfectly, which removes the slightly too-warm picture tone previously seen in SDR. Colour reproduction also improves significantly, with most errors falling to very low levels, and in everyday viewing it's hard to find any visible inaccuracies. You can also improve HDR quite a bit, although some issues remain that stem from the TV's inherent characteristics. The S85H doesn't always hold the luminance curve perfectly. The darkest parts are slightly boosted, while, as you approach the panel's limits, you can see small deviations in the brightest highlights. Add to that the limited coverage of the wider BT.2020 colour gamut, which of course cannot be overcome by any calibration. Despite that, the end result is very good, and after calibration the S85H can deliver a really well-tuned, natural image.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the model's strong points. One might expect that since the television was not designed to achieve record brightness levels, the manufacturer would have opted for a more robust processor and a set of features that would "enhance" lower quality images. Unfortunately – we were also met with significant disappointment here. On the plus side, it has reasonably decent upscaling, which handles HD content and boosts it to 4K in an acceptable manner. However, that is where the list of advantages ends. The television does not offer any features to improve tonal transitions or smooth out digital imperfections, so in most cases, we receive a raw image, exactly as we deliver it from an external source. On a large screen, this lack of support makes lower quality content look simply bland. An additional problem is the phenomenon of overscan. When watching older material, it happens that part of the image is cut off, which only intensifies the impression that Xiaomi has quite a bit of catching up to do in this category.

Samsung's S85H uses the same proprietary AI processor, AI NQ4 Gen2, as last year’s S85F, and in terms of digital image processing it performs quite well. Upscaling is one of the model's stronger points. Lower-resolution material is well sharpened, edges look natural and the picture doesn't come across as overly artificial. Just remember a common quirk of Samsung TVs: at very low resolutions you can't completely turn off overscan, so the TV may slightly crop the left edge of the picture. The "noise reduction" function, that is smoothing weaker tonal transitions, also works very well. The processor can effectively remove posterisation and other artefacts visible in lower-quality material. However, be careful with the strength of this function, because Samsung can be fairly aggressive here. When it's activated, along with unwanted artefacts, fine details such as skin or clothing texture also start to disappear.

The motion fluidity in the Xiaomi A Pro 2026 is an interesting compromise that results from the hybrid matrix used here. At a native resolution of 4K, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch movies and series. It is with them in mind that the manufacturer added a motion smoother, allowing users to adjust the image to their own preferences – one can opt for greater fluidity or leave it with more "cinematic" frames depending on the settings.

The S85H uses an OLED panel, so it performs brilliantly when it comes to motion blur. Pixels respond almost instantly, so moving objects don't produce the characteristic ghosting seen on some LCD TVs. This is especially noticeable with sport or fast-paced games, where the picture stays very clean even during rapid motion. The panel itself runs at 120 Hz. That's more than enough for movies, TV shows, sport or console gaming. It's a shame Samsung didn't include a higher refresh rate aimed at PC gamers, as more and more TVs now offer 144 or even 165 Hz at 4K. However, that doesn't affect motion handling in films or sport.

There's also the classic motion smoothing feature with two settings: blur reduction and judder reduction. So you can choose whether films should keep their cinematic 24 frames per second, or whether you'd prefer to smooth them a bit. The S85H gives plenty of freedom here, and the interpolation itself works well and, with sensible settings, doesn't generate too many artefacts.

No indeed – since Xiaomi has added the "Game Boost 120 Hz" feature here, one might expect that they'd follow up with a solid gaming package. Unfortunately, reality quickly dampens that enthusiasm. Aside from this mode (which, it must be said, is a great addition in a budget build), we only have a rather peculiar player panel. It's hard to call it a full-fledged "game bar" – it's more of a simple overlay on the TV's Menu with limited options. And that’s about it. There’s no ALLM, so the TV won’t switch to game mode automatically. There’s no VRR, so you can forget about smooth frame synchronisation. We also won’t find support for Dolby Vision in games or the HGiG format, which are increasingly becoming the standard on consoles. In short: apart from Game Boost 120 Hz, which indeed allows for a more enjoyable experience at 1080p or 1440p, Xiaomi A Pro 2026 offers nothing that particularly appeals to gamers.

Samsung S85H is very well prepared for gaming, essentially regardless of whether you connect a console or a computer. The manufacturer didn’t skimp on connectors and all four HDMI ports support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR and ALLM without worrying which input to plug your console into. With multiple devices that matters a lot, since you don’t have to choose between a console, a PC or a soundbar connected via eARC. The feature set itself is very complete. The S85H supports VRR, FreeSync and automatic switching to Game Mode, and Samsung also offers its expanded Game Bar, which lets you quickly view the key signal parameters and change settings without leaving the game. The only real omission is Dolby Vision, which will matter mainly for Xbox owners. That’s a typical trait of Samsung TVs. Game Motion Plus performs very well and it’s one of the features that has set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as large an increase in input lag as a classic motion interpolator. In practice, for slower-paced games, racing or action titles it can genuinely improve motion perception, especially if you’re sensitive to low frame rates.