TCL RM7L vs Philips PQS9011 / PQS9001 (The One 2026)

TCL RM7L is a bright TV. In our measurements its peak brightness hovered around 1600 nits. That’s noticeably less than the C7L, which can get close to 2600 nits, but in real-world film scenes the difference between the models isn’t that large. In less demanding shots, where plenty of bright elements appear on screen, the RM7L can sustain around 1000 nits, and sometimes even a bit more, approaching 1500 nits. It performs worse in dark scenes with small points of light; then their brightness can fall to about 500 nits. This behaviour isn’t random. The TV deliberately dims small elements to better control the backlight and preserve higher contrast. This comes at the expense of their intensity, but it’s typical for TVs with local dimming in a similar price range.

Colour gamut coverage

In HDR brightness isn’t the only thing that matters, colour does too. Here the RM7L has a lot to show. Colours are strongly saturated and the wide colour gamut is one of its main strengths. In our measurements it reached about 96% of DCI-P3 and around 83% of BT.2020. It’s worth remembering, though, that on a TV with this kind of backlight the result can vary depending on the scene. On test patterns colours look best, while in films their saturation can be a little lower than on SQD Mini LED or QD-OLED TVs. The backlight design itself is interesting. The RM7L doesn’t use the classic red, green and blue LED set. TCL used two green LEDs and one blue, with red produced via a PFS phosphor. You can see this in spectrometer measurements, but it doesn’t have a major impact on the picture. Colours are still rendered correctly.

The Philips PQS9000 is a moderately bright TV — in our HDR scenes it reached roughly 450 to just over 500 nits. That’s enough to notice a difference compared with SDR. Sun reflections, lamps or flares have a bit more punch than on basic TVs, whose brightness often tops out around 300 nits. It’s not, however, a level where bright elements look especially striking. The biggest limitation remains contrast. Without local dimming, brightening a bright object also lifts the black level around it. So there’s no clear separation between strong highlights and a dark background, and it’s that kind of pairing that really shows what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer markets this model as QLED, it actually uses a PFS phosphor instead of quantum dots. The solution itself doesn’t prevent good results. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice this means the vast majority of colours used in HDR films and series will have appropriate saturation. Lush greens or intense reds aren’t a problem and add appeal to the picture. Limitations are easier to notice in some games and rarer content that use the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. At its price point the PQS9000 has nothing to be ashamed of.

Factory colours were checked in Filmmaker Mode, the best picture setting available to the user. TCL has been using it in its TVs for two years, and its purpose is to reproduce the image as faithfully as possible to the filmmakers' intent. On the RM7L it was indeed the best calibrated mode, though not without faults. The biggest issue was the white balance. An excess of red and blue made the image shift slightly toward pink tones. This was visible in both SDR and HDR. In addition, the brightness response was slightly boosted, so the picture looked a little brighter but at the same time less contrasty than it should.

The factory picture settings for Movie mode on the PQS9000 unfortunately need tweaking. In SDR the biggest problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, in places even slightly pink. Gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the image look flatter than it should.

In HDR the white balance itself performs significantly better. Apart from minor deviations the components sit close together, so there isn’t the same obvious tint as in SDR. The EOTF curve, however, shows a slight brightening of parts of the image, and the biggest issue appears when measuring the wide colour gamut. Many shades deviate substantially from the target, with errors reaching ΔE 8–9. The good gamut coverage we praised earlier therefore doesn’t mean the TV hits specific colours accurately. It can display a wide range of colours, but out of the box it doesn’t use that range very precisely.

Thanks to a fairly extensive calibration menu we managed to correct the vast majority of the issues described earlier. The biggest change was the white balance. After calibration it looks very good, so the image has lost its pinkish tint and become much more neutral. The luminance response has also improved. Both the SDR gamma and the HDR EOTF curve are now much closer to the reference values. The picture is no longer unnecessarily bright, and darker parts look more natural and have greater depth. Better luminance accuracy has also affected the colours, which after calibration are noticeably more accurate. Not everything could be set perfectly though. In HDR material the RM7L still interprets part of the signal in its own way and doesn’t always stick exactly to the reference curve. You can see this mainly in some darker scenes, where the TV can either slightly lift the shadows or darken them completely. That’s where the earlier impression of a slightly brightened, less contrasty image came from. Even so, the calibration delivers a very good result here. It removes the most visible errors and, above all, makes the picture much closer to how it should look.

Calibration brought a big improvement, especially with SDR content. We managed to even out the white balance and remove the earlier colour cast, and the Color Checker measurements now look very good. Colours are much closer to what they should be on screen, so with regular TV or SDR movies we can be happy with the result. Unfortunately HDR spoils that a bit. On the one hand it's limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there are colour errors we couldn't correct because the CMS settings, i.e. colour management, were greyed out and inactive. That loses Philips points with us. The white balance can be fine-tuned, but without access to wide gamut controls you can't as effectively sort out colours in HDR. It's a shame, because the SDR results show the potential is there, but we weren't allowed to fully make use of it everywhere.

Upscaling and digital image processing are not the RM7L’s strong points. TCL has used a MediaTek Pentonic 700 chipset here, labelled MT5896, which isn’t among the best processors at handling lower-quality sources. The biggest issues appear with heavily compressed content from YouTube or regular broadcast TV. The processor can’t effectively hide posterisation and the characteristic banding between shades. The feature meant to smooth these issues does little to help and can also interfere with the picture too much, smoothing faces and fine textures, for example. For that reason it’s best not to use it.

Plain upscaling to 4K looks better. Lower-quality sources are reasonably sharp and retain a sufficient amount of detail. It’s not on a par with the best processors on the market, but for everyday viewing the result is perfectly acceptable.

Digital image processing on the Philips PQS9000 performs well, although we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality sources, but it works rather unevenly. It can improve one part of the picture, only to, moments later and still within the same scene, lose its way and show banding between shades again. On the plus side, it doesn't strip away film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best and that's the one we recommend.

The upscaling to 4K itself is adequate, though the image is very soft. Edges are heavily smoothed, which may leave some viewers wanting more clarity. In that case, it's worth slightly increasing the sharpness in the TV menu, as this will help emphasise edges more. Don't overdo the sharpness slider, though, or you'll get artificial halos instead of an improvement.

The RM7L uses a 144 Hz VA panel, so right from the start it's well prepared for sports, games and other dynamic content. The high refresh rate also gives the motion interpolation more room to work, so it can generate additional frames. On the RM7L it performs well and, when set correctly, can noticeably improve motion smoothness without producing an excessive soap opera effect.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just about the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's particularly pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and in this respect Philips has pleasantly surprised us.

The "Motion Styles" feature is used to adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the material you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and see which level of smoothing suits you best.

When it comes to gamer-focused features, there's almost nothing but praise for the RM7L. The TV supports ALLM, VRR, Dolby Vision Gaming and works correctly with HGiG, so it's hard to point to any major gaps in that area. In practice that means automatic switching to a low-latency mode, smoother motion with variable frame rates and accurate brightness reproduction in HDR games. There's also a handy Game Bar. From it you can quickly check the frame rate, VRR status, signal format and aspect ratio, and change key settings without leaving the game. TCL has added a few extra options too, such as an on-screen reticle and brightening of dark areas, which can be useful in some titles. The biggest downside comes from using the Pentonic 700 processor. Only two of the four HDMI ports support the full HDMI 2.1 standard. With a single console that won't be a big issue, but if you hook up two consoles and a PC you might run out of ports, especially since one of those ports may also be needed for eARC and a soundbar.

Features for gamers

In terms of gaming features the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to choose which one gets the full capabilities. Consoles can use 120 Hz at Full HD, 1440p and 4K, and a PC can also run 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range runs from 48 to 240 Hz, with the upper limit applying to Full HD mode.

It also includes ALLM, so the TV switches itself into game mode, and a properly working HGiG, which is handy when setting HDR on the console. There's a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy because of very high input lag. Apart from that caveat, the feature set is really solid.