TCL P7K / P79K vs XIAOMI A PRO 2026

When it comes to assessing HDR performance, we need to be clear and straightforward without any marketing fluff: the P7K/P79K is not and never was meant to be a champion in this area. The maximum peak brightness that this panel can generate hovers around just 300 nits. This represents a threshold, a sort of thin red line between what can be considered barely satisfactory HDR signal and what is, in reality, only slightly better than standard dynamic range (SDR), unfortunately leaning towards the latter. Synthetic tests confirmed this harsh reality – our measurements taken during movie sessions showed that the luminance in key bright scenes rarely exceeded 200-250 nits. Therefore, this is not a TV that would allow content created in a wide tonal range to truly shine, and that must be openly acknowledged.

Unfortunately, the issue of colour reproduction is presented just as conservatively. Although the manufacturer positions this model within the "QLED" family, owing to the use of a PFS LED filter, the results do not match the heightened expectations. The coverage of the wide DCI-P3 colour gamut reaches only 86%. Compared to the market, this is at best an average result, since most devices that utilise additional layers to expand the colour spectrum easily achieve values at a minimum of 90-92%.

If you're counting on the cinematic HDR experience in the new Xiaomi A Pro 2026, it's best to temper your expectations. This TV is simply too dim to fully realise the potential of contemporary films or series designed for the highest quality image. Our measurements showed brightness levels in the range of 200–300 nits, which are values that are more suited to SDR content than to ambitious HDR productions. In practice, this means that while most films look decent, they certainly won't evoke the 'wow' effect that other TVs do. Fortunately, not everything is lost – credit has to be given to the PFS LED filter used here, a solution similar to the quantum dot technology found in QLEDs. Thanks to this, the coverage of the DCI-P3 colour palette reaches about 94%, resulting in vibrant, saturated colours in the vast majority of materials.

Every reliable assessment of image quality must start with selecting the most optimal, factory preset mode. In the case of the tested P7K/P79K model, the choice was made without hesitation for the "Film" mode. It is the mode that presents an image closest to the intentions of its creators, avoiding both the exaggerated brightness of the dynamic mode and the excessive dimming known from eco settings. And it must be admitted that, for a device in this price range, the factory calibration is surprisingly decent, although it is not without a few stumbles. The most noticeable shortcoming turned out to be the not entirely correctly set white balance. A slight dominance of the blue component gives the image a subtly cool, frosty character, straying from the ideal neutrality that the director intended to show us. The television handles the reproduction of greyscale in the standard dynamic range much better – the gamma curve is almost exemplary. The only slight reservation can be made for the darkest parts of the image, where a delicate deviation from the norm causes a loss of some detail in the shadows. The most significant challenge, however, for the TCL software was interpreting the HDR signal, as illustrated by the EOTF curve. The television follows its own, rather free path here – the darkest details are disproportionately brightened, followed by a noticeable slowdown in brightness increase for mid-tones. Fortunately, most of these imperfections are of a software nature, which can be eliminated. With that thought in mind, we proceeded to the process of professional calibration.

What we saw in Filmmaker mode really surprised us – and unfortunately not in a good way. The mode advertised as the Hollywood standard resembled more of a display in a shop window. The white balance was shifted towards blue, which led to massive colour errors and the effect of blown-out scenes in SDR content. It was a bit better, though far from perfect, in HDR materials. There were also problems there – colour saturation and the entire palette consistently drifted towards cooler tones, resulting in an image that had an artificial, cold tint rather than a cinematic character. In other words: even in Filmmaker mode, which should be the showcase of this television, we got an effect far from expectations.

The calibration process turned out to be spot on, especially in the context of standard dynamic range (SDR) content. We successfully managed to eliminate the tendency of the television to showcase cool tones, restoring white to its natural neutrality. Moreover, the precise adjustment allowed us to correct a slight error in the gamma curve, enabling the darkest parts of the image to regain proper depth, without any signs of unnatural brightness. The results are measurable and impressive – in the ColorChecker test, the vast majority of colour reproduction errors fell below the perceptual threshold, achieving a deltaE value of below 2. This is a result that more expensive models would not be ashamed of. Unfortunately, in the case of HDR content, we encounter a wall in the form of the panel's structural limitations. And although we managed to bring the colours into line, the software's specifics mean that the television still adapts brightness in its own way, as evidenced by the persistent, non-standard EOTF curve. To summarise, calibration adds tremendous value, but it is important to be aware that it won't overcome certain physical barriers. The slightly elevated blacks, resulting from the lack of local dimming, and limited peak brightness mean that HDR content won't always be able to showcase its full potential. This is simply not the main task of this display; its true strength, especially after professional tuning, lies in viewing SDR material.

Even though Xiaomi isn't a brand associated with top-tier televisions, it's fair to say that even in a budget model like the A Pro 2026, the manufacturer left plenty of calibration settings. After a few adjustments, the SDR picture took on a completely new look. The colours stopped veering into blue tones, the whites gained a sense of naturalness, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was a slightly different story with HDR materials. Here, it was immediately noticeable what we had already mentioned – the overexposure of bright scenes and issues with balance control. Calibration helped only partially, as the limitations of the panel itself were at play. However, it must be emphasized that in the case of SDR, the television changed beyond recognition, and definitely for the better.

After a series of harsh evaluations, thankfully, it’s time for some praise, and this is deserved by the TCL AiPQ image processor for its work in the field of digital processing and content scaling. It should be noted right away that we are not talking about the level known from flagship models; nonetheless, in the price segment represented by the P7K/P79K, the results achieved are more than solid. The function that smooths tonal transitions performs particularly well, effectively eliminating posterization, which are the characteristic bands often visible in materials with higher compression, for instance, from choose.tv. The algorithm can elegantly remove unwanted gradients, which ultimately looks really good. The television also handles upscaling competently, which means the task of raising low-resolution materials to 4K standard. The resulting image, although it may seem a bit too sharp out of the box, is fortunately not a problem. The software allows for free adjustment of this parameter using a sharpness slider, allowing the final appearance to be easily tailored to personal preferences.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the model's strong points. One might expect that since the television was not designed to achieve record brightness levels, the manufacturer would have opted for a more robust processor and a set of features that would "enhance" lower quality images. Unfortunately – we were also met with significant disappointment here. On the plus side, it has reasonably decent upscaling, which handles HD content and boosts it to 4K in an acceptable manner. However, that is where the list of advantages ends. The television does not offer any features to improve tonal transitions or smooth out digital imperfections, so in most cases, we receive a raw image, exactly as we deliver it from an external source. On a large screen, this lack of support makes lower quality content look simply bland. An additional problem is the phenomenon of overscan. When watching older material, it happens that part of the image is cut off, which only intensifies the impression that Xiaomi has quite a bit of catching up to do in this category.

The issue of fluidity and sharpness of motion image is inextricably linked to the fundamental parameter of the panel, and in the case of the TCL P7K/P79K, we are dealing with a panel that has a native refresh rate of 60 Hz. This specification at the outset defines its capabilities and makes it hard to unequivocally recommend it to enthusiasts of dynamic sports broadcasts. During quick camera movements, the image loses sharpness, and the panel also shows a slight tendency to smudge, which may be noticeable to more sensitive viewers. Fortunately, not everything in this aspect has been left to chance. The manufacturer has implemented a simple motion smoothing system, which is primarily used in film materials recorded at 24 or 30 frames per second. Thanks to a dedicated slider, the user can decide on the final nature of the motion – from maintaining a fully cinematic, slightly jerky image, to achieving a very smooth, almost theatrical effect. It is a simple yet effective tool that allows one to adjust the viewing experience to their own preferences.

The motion fluidity in the Xiaomi A Pro 2026 is an interesting compromise that results from the hybrid matrix used here. At a native resolution of 4K, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch movies and series. It is with them in mind that the manufacturer added a motion smoother, allowing users to adjust the image to their own preferences – one can opt for greater fluidity or leave it with more "cinematic" frames depending on the settings.

Although on paper the native 4K@60Hz matrix might suggest that the TCL P7K/P79K is not a TV tailored for gamers, the reality turns out to be surprisingly different. On the contrary, the manufacturer has ensured a rich set of features that make it a very friendly companion for next-generation consoles. Onboard, we find key technologies such as ALLM, which provides automatic switching to low-latency mode, and VRR, or variable refresh rate, which eliminates screen tearing. The list is rounded off with support for Dolby Vision Gaming and a simple yet functional Game Bar. However, the real and extremely pleasant surprise is something else. It turns out that the TV effortlessly supports a high refresh rate signal of 120Hz, but at lower resolutions – 1080p and 1440p. This is fantastic news for console owners, who know how rarely games run in native 4K at a full 120 frames per second. The option to choose between higher resolution and doubled smoothness is therefore an incredibly sensible compromise.

In summary, while the P7K/P79K may not be the target screen for the most passionate, tournament gamers, it offers a package of options for casual or occasional console users that is hard to find among many competitors at this price point.

No indeed – since Xiaomi has added the "Game Boost 120 Hz" feature here, one might expect that they'd follow up with a solid gaming package. Unfortunately, reality quickly dampens that enthusiasm. Aside from this mode (which, it must be said, is a great addition in a budget build), we only have a rather peculiar player panel. It's hard to call it a full-fledged "game bar" – it's more of a simple overlay on the TV's Menu with limited options. And that’s about it. There’s no ALLM, so the TV won’t switch to game mode automatically. There’s no VRR, so you can forget about smooth frame synchronisation. We also won’t find support for Dolby Vision in games or the HGiG format, which are increasingly becoming the standard on consoles. In short: apart from Game Boost 120 Hz, which indeed allows for a more enjoyable experience at 1080p or 1440p, Xiaomi A Pro 2026 offers nothing that particularly appeals to gamers.