TCL P755 vs TCL C7L

TCL P755 provides average HDR effect quality. The maximum brightness of the TV is slightly below 300 nits. Such brightness limits the intensity of bright areas in HDR content. In practice, this means that bright elements may not be sufficiently pronounced, affecting the overall impression of contrast. However, the TV offers wide coverage of the DCI P3 colour gamut, reaching about 93%. As a result, colours are vibrant and saturated, significantly improving colour reproduction quality in HDR content. Despite the limited brightness, the wide colour range allows for richer and more realistic shades.

TCL C7L is undoubtedly an extremely bright television. In synthetic tests on static patterns, it can achieve peak brightness of around 2800 nits. This is a phenomenal result, considering the price range it occupies. Unfortunately, tests with real movie scenes are not as spectacular as measurements of white squares. Brightness in real HDR footage drops in the C7L model to around 1200 nits. This is still a very good result, as this is the value at which the vast majority of contemporary films are mastered. However, when small, point-like elements appear on the screen, the brightness of these details drastically drops – even to around 400 nits – which somewhat diminishes the HDR effect. The television does this intentionally to maintain a better black level and to avoid a huge light bloom. This is somewhat explainable, but it also shows that Mini LED technology is not completely uncompromising in this regard. As for the HDR effect itself – alongside brightness, colours are of course key here. And these, thanks to the use of new, “super” quantum dots, are simply outstanding and among the best on the market. The television can achieve around 90% coverage of the ultra-wide colour gamut BT.2020 and 99% of the DCI-P3 gamut, easily matching the best RGB MINI-LED screens. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which can often be problematic in competing RGB Mini-LED televisions.

The colour reproduction in the P755 in "Cinema" mode, although it is the best factory setting, leaves much to be desired. The biggest issue is the white balance, where the chart clearly shows a spike in the red colour and a drop in the green colour. This leads to a shift in colours towards red, causing the colours on the screen to appear less natural and may look incorrect, especially in scenes with a white or neutral background. This is confirmed by the "Colour Checker" test, which reveals that the colours are indeed shifted towards red, affecting the realism of the image and reducing the perception of colour depth. In terms of contrast, the gamma chart analysis shows significant fluctuations, particularly in the dark areas of the image, where values drop below the optimal level of 2.4. As a result, darker areas may be displayed brighter than they should be. Additionally, the EOTF curve, responsible for brightness reproduction, sits slightly above the reference curve. The graph shows a slight increase in brightness to about 50%, after which there is only a minor drop. This leads to excessive brightness enhancement in the mid-range of the image and may result in loss of detail and distortion in brighter scenes.

When it comes to out-of-the-box colours, a new feature in TCL TVs – including the C7L model – is the presence of a new picture mode called Filmmaker Mode. This is significant news, as such a mode was not previously available from this manufacturer. By design, as the name suggests, the picture in this setting is intended to be delivered with the full intent of the film's creator. After our tests, we can confirm that it is undeniably the best built-in mode in this TV if you value true-to-life colour reproduction straight out of the box. However, we certainly wouldn’t say it is perfect. Like most devices on the market, this C7L also had its factory faults. The white balance in Filmmaker Mode leaned towards a slightly greenish-yellow hue, mainly due to an excess of green component and a noticeable lack of blue. Of course, for the average viewer, this won’t be a drastic flaw, but if you value perfect whites, natural skin tones, and harnessing the full potential of these new "super" quantum dots from the structure, then the TV is begging for professional calibration.

After calibration, the colour reproduction on the television significantly improves when it comes to SDR content. The colour curves are now close to the ideal value, and the gamma is more stable. Although the dip at the beginning of the graph to the values is still present, the overall accuracy of colour reproduction is much better. The “Colour Checker” test shows that most colour samples have errors below level 2, indicating improved colour fidelity. A few deviations are present, but generally, the colours are now more realistic and consistent with reality.

Calibration also brings improvements in HDR content. The white balance has been corrected, translating to more natural colour reproduction. The EOTF curve, although now closer to the reference curve, still shows a slight boost in brightness at the beginning of the graph. This leads to minor distortions in very bright scenes, but the overall tonality and detail have been enhanced. Dynamic tone mapping works more effectively, improving image quality in bright areas and preserving more details.

Although the image from the device does not achieve full perfection, calibration brings significant improvement. After adjusting the settings, the television performs much better, offering more realistic and accurate colour reproduction in SDR and HDR content. While some shortcomings can still be noticed, calibration effectively eliminates many previous issues, ensuring better image quality and more natural colours.

After conducting a professional calibration, we were able to greatly improve the situation in the factory Filmmaker Mode. Following our adjustments, the errors in the ColorChecker test and across the entire wide colour gamut dropped below the threshold of human perception – that is, below a value of 3, which is indeed a very good result. The TCL C7L definitely benefits from such a treatment in terms of colour fidelity, and it's hard to deny that. However, the management of brightness in HDR content after calibration appears to be a bit worse. As I described earlier – even though we set this model up properly, when we turn on real film scenes on the television, it can manage its brightness in quite a peculiar way. It often brightens certain elements on the screen in a manner inconsistent with the creator's intent, which is visibly apparent on the EOTF graphs measured in specific films. Despite this flaw – or rather, this specific characteristic of the television – one cannot take away from it: after calibration, the C7L was able to reproduce the colours flawlessly.

The “Gradual Smoothing” function works quite well, effectively eliminating visible boundaries between different shades of the same colour. Thanks to it, tonal transitions are smoother. Unfortunately, this function is not available in HDR mode, which can affect the quality of tonal gradation in higher dynamic range materials.

In the case of image scaling, the television does not perform its best. There are noticeable edge cut-offs, particularly evident on the model's figure and the branches of trees. The blurring of details in these areas affects the overall sharpness of the image. This may be noticeable when watching content in a lower resolution. Additionally, SD quality image is displayed with slight cropping at the top as well as the bottom.

This point could be called in a sense the Achilles' heel of the C7L model. Unfortunately, this television uses an older chipset from MediaTek – the Pentonic 700 – which has never been known for outstanding digital image processing. This is clearly visible in the functioning of the gradual smoothing feature, which is responsible for reducing jagged edges and removing digital noise. It simply works very poorly – when set to a low level, its effectiveness is practically none. The only small plus here is that the algorithm doesn't mess up anything else in the image and doesn't forcefully blur details. The upscaling, that is, the scaling of the image from lower resolutions to 4K, performs a bit better. It is simply adequate and does not stand out in any particular way against the competition. However, it cannot be denied that the C7L would greatly benefit in this aspect if the manufacturer decided to use the newer Pentonic 800 processor, which is now being found in an increasing number of competitive models.

The television offers decent, though not perfect, results in terms of motion smoothness. In the case of movies, the television has a "Flicker Reduction" feature that allows for adjustment of motion smoothness on a scale from 1 to 10. With this option, we can tailor the image appearance to cinema or more theatrical preferences (with lower or higher speed).

TCL C7L features a native 4K panel with a refresh rate of 144 Hz, which can even ramp up to 288 Hz at lower resolutions when using a PC. These are certainly very high and commendable figures on paper, but in everyday life, it's worth remembering that almost all dynamic content you display on this television will still revolve around a maximum of 120 Hz. To tame this dynamism, the TV menu includes a motion smoothing system called "Motion Clarity." It offers several predefined modes, including a user mode, which we highly recommend setting manually using our tried-and-true guides on our YouTube channel. You’ll find two key sliders available. The first one, "Motion Blur Reduction," is responsible for reducing blurring and improving sharpness in 60fps dynamic content, such as sports broadcasts. The second slider, "Flicker Reduction," allows for the addition of artificial frames in movies and shows recorded at cinematic 24 or 30 frames per second. This naturally allows for the complete elimination of the annoying stutter effect during camera movement shots.

The device offers a range of features useful for gamers, such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), Dolby Vision for gamers, and Game Bar. ALLM automatically switches the TV to low latency mode, significantly improving responsiveness to commands from the controller and minimising input lag. VRR synchronises the screen refresh rate with the number of frames generated by the console, eliminating the tearing effect and providing smoother gameplay. Dolby Vision for gamers enhances picture quality by offering better colour and contrast reproduction in games that support this format. The Game Bar feature allows quick access to game settings and monitoring of key parameters such as response time.

However, the TV has some limitations. The 60 Hz panel prevents the display of signals with higher refresh rates at different resolutions, which may affect the fluidity of the image in dynamic games. Additionally, the lack of support for G-Sync technology for PC may impact the quality of gameplay on a computer. It is also worth noting that the HGiG mode, which aims to improve image quality in HDR games, does not work correctly on this model, negatively affecting the visual experience in HDR-supported games.

When it comes to gaming, the TCL C7L is simply an outstanding television for gamers. With the presence of two full-bandwidth HDMI 2.1 ports at 48 Gbps, it provides access to all the key features that console and high-end PC owners require. We have a well-functioning ALLM mode with very low input lag and VRR frame synchronization, which operates within an impressive range from 48 to 288 Hz. Importantly, unlike some competitors, TCL has ensured a proper implementation of the console HDR10 HGIG profile and support for Dolby Vision in games. This is complemented by a very well-designed gamer panel, known as Game Bar, which even allows for editing its appearance and changing the theme to perfectly match the style of your console.

The only thing that can – and should – be critiqued here is the fact that the television only offers two full HDMI 2.1 ports, while the other two are older HDMI 2.0. This creates quite a significant logistical problem. Why? Because one of those fast ports also supports the eARC audio return channel. In practice, this means that if you connect a soundbar or home theatre system to the television, you’ll only have one available HDMI 2.1 port left. If you have two consoles or a console and a powerful computer at home, unfortunately, you’ll have to give something up or constantly juggle cables at the back of the unit while maintaining comfortable audio system control.