TCL C7L vs TCL X11L

The TCL C7L is without doubt an extremely bright TV. In synthetic tests with static patterns it can reach peak brightness of around 2800 nits. That's a phenomenal result, given the price bracket it occupies. Unfortunately, tests with real film scenes aren't as spectacular as measurements using white squares. Brightness in real HDR shots falls in the C7L to around 1200 nits. That's still very good, because the vast majority of modern films are mastered to about that level. However, when small, pinpoint elements appear on screen, the brightness of those details drops drastically, even to roughly 400 nits, which somewhat weakens the HDR effect. The TV does this deliberately to preserve deeper black levels and to avoid a large halo of light. That's understandable to an extent, but it also shows that Mini LED technology is not without compromises in this area. As for the HDR experience itself, alongside brightness the key factor is of course colour. And thanks to the use of new 'super' quantum dots, the colours are simply outstanding and among the best on the market. The TV can achieve very wide coverage of the BT.2020 and DCI-P3 colour gamuts, matching the best RGB Mini-LED displays with ease. Best of all, the C7L can maintain such high colour saturation regardless of the scene shown, which is often a problem for competing RGB Mini-LED TVs.

Such a large number of zones translated not only into deep, inky blacks but also into the panel’s brightness. The X11L is an extremely bright TV. Peak brightness can easily exceed 4000 nits, and with the special "Boost" mode enabled, under specific conditions that brightness can even hover around the marketing figures of 9000–10,000 nits. This is undoubtedly one of the brightest, if not the brightest, screens on the market. But how do those numbers translate to real-world movie measurements? The results are very good, though of course far from the marketing promises. Our measured brightness in actual movie scenes hovered around 2000–3000 nits. That’s an outstanding result, considering that the vast majority of content is produced to those brightness levels, including the rarer material mastered to 4000 nits. But it also shows that the numbers the manufacturer brags about don’t always translate directly to the video content available at home. The only "quirk" (if you can call it that) is that when very small, bright elements appear on the screen, their brightness drops below 2000 nits. The dimming algorithm does this deliberately to preserve deep blacks and minimize halo. This is entirely understandable and the effect remains very strong, but it also demonstrates that even with such powerful hardware, Mini-LED technology has its limits and does not always work without compromise. In HDR, brightness isn’t the only thing that matters; color saturation and color accuracy do as well. On the X11L these are very good thanks to the new Super QLED quantum dots (SQD). The addition of a newly applied filter delivered excellent coverage of the P3 color gamut and the ultra-wide BT.2020. Although it doesn’t reach the advertised 100% of BT.2020, values around 89–90% can be called excellent. Colors are not far off those of RGB Mini-LED panels. We can even say they’re more stable because they use a less demanding algorithm than the one RGB screens often have to deal with.

When it comes to out-of-the-box colours, a new feature in TCL TVs – including the C7L model – is the presence of a new picture mode called Filmmaker Mode. This is significant news, as such a mode was not previously available from this manufacturer. By design, as the name suggests, the picture in this setting is intended to be delivered with the full intent of the film's creator. After our tests, we can confirm that it is undeniably the best built-in mode in this TV if you value true-to-life colour reproduction straight out of the box. However, we certainly wouldn’t say it is perfect. Like most devices on the market, this C7L also had its factory faults. The white balance in Filmmaker Mode leaned towards a slightly greenish-yellow hue, mainly due to an excess of green component and a noticeable lack of blue. Of course, for the average viewer, this won’t be a drastic flaw, but if you value perfect whites, natural skin tones, and harnessing the full potential of these new "super" quantum dots from the structure, then the TV is begging for professional calibration.

When you switch on what should theoretically be the best Filmmaker Mode, you expect a one-to-one image of what the director saw. On the X11L it's quite good, but the mode has obvious flaws that our measurements immediately exposed. Let's start with SDR. Both the white balance and the gamma are simply miscalibrated. The white point has too much blue and red, so there's a faint pink cast on the screen. That also affects the gamma, which instead of holding the cinematic 2.4 runs closer to 2.2. What does that mean? The whole picture ends up pushed and artificially brighter. The worst, though, is saved for last: the HDR measurements. Besides the slight white balance shift, the X11L fails on the luminance management curve, the so‑called EOTF. What we saw in the measurements immediately explains what we saw earlier in films. The image is unnaturally bright because the curve massively overshoots the reference. The TV just unapologetically lifts the dark parts of the picture to create a "wow" effect, completely ignoring the director's intent.

After a professional calibration we managed to greatly improve performance in the out-of-the-box Filmmaker Mode. After our adjustments the errors in the ColorChecker test and across the wide colour gamut dropped below the threshold of human perception, that is below a value of 3, which is a very good result. The TCL C7L clearly benefits from such treatment in terms of colour fidelity and it's hard to argue otherwise. A bit worse, however, is brightness management with HDR content after calibration. As I described earlier, even though we set this model up correctly, when you play real film scenes on the television it can handle its brightness in a rather peculiar way. It often brightens certain elements on screen contrary to the filmmaker's intent, which is clearly visible on the EOTF curves measured in specific films. Despite this defect, or rather a specific characteristic of this television, one thing is undeniable: after calibration the C7L was able to reproduce colours accurately.

After professional calibration we chiefly managed to fully master the SDR signal. The X11L responded perfectly to our adjustments. We completely straightened the white balance, removed that pink tint and set gamma to a stable 2.4. After that treatment the picture finally became consistent with the director's vision, natural and free of artificial boosts. We were also able to make minimal tweaks for HDR, but the TV's biggest flaw remained unchanged. I'm talking, of course, about how the X11L handles its brightness and how much it overshoots the EOTF curve. Unfortunately, TCL provides practically no controls to adjust this parameter. Even during professional calibration the software does not allow you to rein in that curve, so the TV in HDR will always tend to brighten the image on its own.

This could, in a sense, be called the Achilles' heel of the C7L. Unfortunately, this TV uses an older MediaTek chipset, the Pentonic 700, which has never been known for exceptional image processing. You can see that clearly in the operation of the progressive smoothing function, which is responsible for reducing jagged edges and removing digital noise. It simply performs very poorly — set to low, its effectiveness is practically nil. The only small plus is that the algorithm doesn't introduce extra artefacts or unnecessarily blur fine detail. Upscaling, that is scaling lower-resolution sources up to 4K, fares a little better. It's simply adequate and nothing special compared with the competition. It's hard to deny that the C7L would benefit greatly in this area if the manufacturer opted for the newer Pentonic 800 processor, which is now appearing in an increasing number of rival models.

As with the C8L we tested earlier, TCL has delivered a substantial upgrade in its flagship X series in this area. It's all down to the MediaTek Pentonic 800 processor used in this model. Thanks to it, features like smoothing tonal transitions and even upscaling content to higher resolutions finally look the way they should. The biggest Achilles' heel of previous TCL models has finally been overcome. The processor handles digital processing superbly, and in this respect the TV no longer falls short of flagship models from Korea or even the most polished ones from Japan.

TCL C7L uses a native 4K panel with a 144 Hz refresh rate, which at lower resolutions when used with a PC can even reach 288 Hz. These are, of course, very high figures and look good on paper, but in everyday use it's worth remembering that almost all dynamic content you play on this TV will still run at around a maximum of 120 Hz. To tame that motion, the TV's menu includes a motion smoothing system called "Motion Clarity". It offers several preset modes, including a user mode that we strongly recommend you set manually using our tried-and-tested guides on our YouTube channel. You get two key sliders there. The first, "Blur Reduction", reduces smearing and improves sharpness in dynamic 60 fps material, such as live sports broadcasts. The second slider, "Flicker Reduction", lets you add artificial frames to films and series shot at cinematic 24 or 30 frames per second. That, of course, completely gets rid of the annoying judder during camera-move shots.

Spec-wise the X11L can impress, supporting refresh rates up to 144 Hz at 4K, and in Full HD it can be pushed as high as 288 Hz. From a real-world perspective, though, we were most interested in how the screen handles 120 Hz — that's the limit of today's hardware, led by current-generation consoles. How does it perform in practice? Even though it's a VA panel, the screen doesn't exhibit heavy ghosting. With very fast-moving objects you can notice a slight trail, but it's subtle enough that you hardly notice it while gaming or watching sport. Also very helpful is the motion smoothing feature called "Wyrazistość ruchów", where you can adjust motion fluidity to your liking. You'll find the recommended settings in the photo.

When it comes to gaming, the TCL C7L is simply an outstanding TV for players. With two full‑bandwidth HDMI 2.1 ports at 48 Gbps, you get access to all the key features required by console owners and high‑end PCs. It offers a well‑working ALLM mode with very low input lag and VRR frame sync that operates across an impressive 48 to 288 Hz range. Importantly, unlike some rivals, TCL has implemented the console HDR10 HGIG profile correctly and supports Dolby Vision in games. The package is rounded off by a very well designed player panel, the Game Bar, which even lets you edit its appearance and change the theme so it perfectly matches the look of your console.

The only thing you can — and should — criticise is that the TV only provides two full HDMI 2.1 ports, while the other two are older HDMI 2.0. That creates quite a practical problem, because one of those fast ports also handles the eARC (enhanced Audio Return Channel). In practice, that means if you connect a soundbar or home theatre system to the TV, you’ll be left with only one free HDMI 2.1 input. If you have two consoles or a console and a powerful PC at home, you’ll unfortunately have to give something up or keep swapping cables at the back if you want convenient control of your audio system.

For gamers the X11L is simply a superb screen. TCL has already trained us to expect that it packs practically every feature available on the market into its products, and it’s exactly the same with the flagship X series. Thanks to the new processor, the X11L gets four HDMI 2.1 ports with full 48 Gbps bandwidth. Naturally, HDMI 2.1 brings a set of very useful options, such as automatic low-latency mode (ALLM) and variable refresh rate (VRR) synchronisation, working across the full refresh range up to 288 Hz. All of these features can be conveniently controlled from the dedicated Game Bar. Interestingly, you can customise its appearance to your taste, with three ready-made themes directly referencing the Nintendo, PlayStation and Xbox consoles. And speaking of Xbox, Dolby Vision Gaming also runs without issue on the X11L.

When playing in the standard HDR10 format you should be aware of the screen’s specific brightness-curve tuning, which can cause problems during initial setup. Even though the TV supports HGiG, getting everything set correctly in the PlayStation or Xbox system menus can be tricky. The screen’s algorithms tend to artificially brighten the test checkerboard, so nailing the correct white-clip point by eye is genuinely difficult. For HDR10 to look correct, we suggest manually setting the console brightness in the console menu to around 2500–3000 nits.