TCL C7L vs TCL A400 PRO

The TCL C7L is without doubt an extremely bright TV. In synthetic tests with static patterns it can reach peak brightness of around 2800 nits. That's a phenomenal result, given the price bracket it occupies. Unfortunately, tests with real film scenes aren't as spectacular as measurements using white squares. Brightness in real HDR shots falls in the C7L to around 1200 nits. That's still very good, because the vast majority of modern films are mastered to about that level. However, when small, pinpoint elements appear on screen, the brightness of those details drops drastically, even to roughly 400 nits, which somewhat weakens the HDR effect. The TV does this deliberately to preserve deeper black levels and to avoid a large halo of light. That's understandable to an extent, but it also shows that Mini LED technology is not without compromises in this area. As for the HDR experience itself, alongside brightness the key factor is of course colour. And thanks to the use of new 'super' quantum dots, the colours are simply outstanding and among the best on the market. The TV can achieve very wide coverage of the BT.2020 and DCI-P3 colour gamuts, matching the best RGB Mini-LED displays with ease. Best of all, the C7L can maintain such high colour saturation regardless of the scene shown, which is often a problem for competing RGB Mini-LED TVs.

The TCL A400 Pro is a moderately bright TV. Its peak brightness reaches around 600 nits. That level already allows for a real HDR effect and in many films it does deliver a noticeably more appealing picture than in SDR. However, it’s not a level that dazzles by brightness alone. The A400 Pro is not one of those TVs that bombard the viewer with a powerful flash in every dramatic scene. The biggest limitation is visible with small bright elements on a dark background. Because of fairly aggressive zone control, the TV can significantly reduce their brightness, in extreme cases down to around 100 nits. That means small lights, sparks, stars or single highlights can be much less visible than they should be. It should be added, though, that this isn’t done without reason. The A400 Pro does this to keep black levels as deep as possible and to limit the halo effect around bright objects. It’s a deliberate compromise: the TV more often opts for deeper blacks rather than maximising point highlights. On the one hand this is understandable, especially given a limited number of dimming zones, but on the other you should be aware that the HDR effect won’t always be as strong as the peak brightness alone might suggest.

On the plus side, the colours are a strength. The PFS LED filter used here, marketed by the manufacturer as QLED, delivers suitably saturated colours. Our measurements showed about 94% coverage of the DCI-P3 gamut and around 74% of BT.2020, which is a solid result for this class.

When it comes to out-of-the-box colours, a new feature in TCL TVs – including the C7L model – is the presence of a new picture mode called Filmmaker Mode. This is significant news, as such a mode was not previously available from this manufacturer. By design, as the name suggests, the picture in this setting is intended to be delivered with the full intent of the film's creator. After our tests, we can confirm that it is undeniably the best built-in mode in this TV if you value true-to-life colour reproduction straight out of the box. However, we certainly wouldn’t say it is perfect. Like most devices on the market, this C7L also had its factory faults. The white balance in Filmmaker Mode leaned towards a slightly greenish-yellow hue, mainly due to an excess of green component and a noticeable lack of blue. Of course, for the average viewer, this won’t be a drastic flaw, but if you value perfect whites, natural skin tones, and harnessing the full potential of these new "super" quantum dots from the structure, then the TV is begging for professional calibration.

As usual, we carried out colour measurements in the best‑tuned picture mode, Filmmaker Mode, the one intended to be closest to the creators’ intentions. The A400 Pro, of course, also offers other picture modes, but in practice they show much larger colour errors and interfere more with the image character. So we won’t cover them in detail in this part of the review. How does the factory colour reproduction fare? In short: really very well. In fact, looking at our measurements, it’s excellent. Both the white balance and the luminance response were set surprisingly precisely. The errors were so small that during the measurements we genuinely rubbed our eyes in surprise. Such good factory settings don’t happen often, even in televisions running Filmmaker Mode. All the more reason to praise TCL, because the A400 Pro straight out of the box can produce an image very close to how the source material should look. The results were so good you could easily think someone had already given this unit extra attention and tried to calibrate it. Our one bit of nitpicking comes down to a single issue. In SDR material the image was slightly brighter than the reference for a dark room, because the factory gamma was set closer to 2.3 than 2.4. It’s not a large error and most viewers probably won’t even notice it. We should note, however, that we are talking about our specific test unit. There can always be some variation in factory colour between individual units, production batches or screen sizes. We do not assume every A400 Pro will look identical straight out of the box.

After a professional calibration we managed to greatly improve performance in the out-of-the-box Filmmaker Mode. After our adjustments the errors in the ColorChecker test and across the wide colour gamut dropped below the threshold of human perception, that is below a value of 3, which is a very good result. The TCL C7L clearly benefits from such treatment in terms of colour fidelity and it's hard to argue otherwise. A bit worse, however, is brightness management with HDR content after calibration. As I described earlier, even though we set this model up correctly, when you play real film scenes on the television it can handle its brightness in a rather peculiar way. It often brightens certain elements on screen contrary to the filmmaker's intent, which is clearly visible on the EOTF curves measured in specific films. Despite this defect, or rather a specific characteristic of this television, one thing is undeniable: after calibration the C7L was able to reproduce colours accurately.

Despite the outstanding factory tuning, we couldn't resist checking how the TCL A400 Pro would respond to professional calibration. With such a strong starting point, we were especially curious whether we could squeeze even more from this TV. And here we have to boast: we managed to bring our sample to absurdly low colour errors. Results below 1 are something you don't see every day, even on very good TVs. Such outcomes are more often associated with professional reference monitors than with a lifestyle TV for the living room. In terms of white balance and colour reproduction, the A400 Pro after calibration simply excelled. The only thing we can pick on after closer analysis concerns the brightness response. The TV can vary the luminance level depending on the content being displayed, and quite often the picture is a little darker than it should be according to the reference. This most likely stems from the way the Mini-LED backlight and the local dimming algorithms work in this model. That said, it doesn't ruin the overall impression, because in terms of colour precision the A400 Pro after calibration reached a level that was genuinely hard to expect.

This could, in a sense, be called the Achilles' heel of the C7L. Unfortunately, this TV uses an older MediaTek chipset, the Pentonic 700, which has never been known for exceptional image processing. You can see that clearly in the operation of the progressive smoothing function, which is responsible for reducing jagged edges and removing digital noise. It simply performs very poorly — set to low, its effectiveness is practically nil. The only small plus is that the algorithm doesn't introduce extra artefacts or unnecessarily blur fine detail. Upscaling, that is scaling lower-resolution sources up to 4K, fares a little better. It's simply adequate and nothing special compared with the competition. It's hard to deny that the C7L would benefit greatly in this area if the manufacturer opted for the newer Pentonic 800 processor, which is now appearing in an increasing number of rival models.

Digital image processing is unfortunately one of the weaker points of the TCL A400 Pro. That does not mean the TV performs badly, but it’s hard to call it anything clearly above standard. The upscaling itself is acceptable: edges are fairly well smoothed, the picture does not look overly sharp or “pixelated”, and lower-quality material can be watched without major discomfort. At the same time the overall image has a slightly soft character and you don’t see the kind of precision that the best image processors in more expensive TVs can offer.

Handling of tonal transitions caused by heavy compression is much worse. TCL equipped the A400 Pro with a “Gradual Smoothing” feature that in theory should reduce visible colour banding and artefacts in lower-quality material. In practice, however, its effectiveness is very limited. It does not improve tonal transitions in any noticeable way, and at higher settings it can further smooth image detail, giving it an artificial, slightly blurred character. For that reason we think it’s best to leave this feature off. The A400 Pro copes decently with basic image scaling, but if you often watch heavily compressed material with visible posterisation, this model will not be one of the best choices.

TCL C7L uses a native 4K panel with a 144 Hz refresh rate, which at lower resolutions when used with a PC can even reach 288 Hz. These are, of course, very high figures and look good on paper, but in everyday use it's worth remembering that almost all dynamic content you play on this TV will still run at around a maximum of 120 Hz. To tame that motion, the TV's menu includes a motion smoothing system called "Motion Clarity". It offers several preset modes, including a user mode that we strongly recommend you set manually using our tried-and-tested guides on our YouTube channel. You get two key sliders there. The first, "Blur Reduction", reduces smearing and improves sharpness in dynamic 60 fps material, such as live sports broadcasts. The second slider, "Flicker Reduction", lets you add artificial frames to films and series shot at cinematic 24 or 30 frames per second. That, of course, completely gets rid of the annoying judder during camera-move shots.

The TCL A400 Pro is equipped with a 144 Hz panel, but in practice we're most interested in how it performs at 120 Hz. That's the refresh rate most consoles, as well as many sports broadcasts and high-motion sources, are limited to today. In that range the TV performs quite well. Motion clarity is really good, especially after properly configuring the motion smoothing. The 'Motion Clarity' function improves smoothness. Its settings include two sliders that let you tailor the motion smoothing to your preferences, separately for low-frame-rate and high-frame-rate content. This allows you to achieve either a more cinematic look or a noticeably smoother image. If you don't want to fiddle with manual configuration, you can use built-in presets such as Low, Medium, High, Cinema or Nature.

When it comes to gaming, the TCL C7L is simply an outstanding TV for players. With two full‑bandwidth HDMI 2.1 ports at 48 Gbps, you get access to all the key features required by console owners and high‑end PCs. It offers a well‑working ALLM mode with very low input lag and VRR frame sync that operates across an impressive 48 to 288 Hz range. Importantly, unlike some rivals, TCL has implemented the console HDR10 HGIG profile correctly and supports Dolby Vision in games. The package is rounded off by a very well designed player panel, the Game Bar, which even lets you edit its appearance and change the theme so it perfectly matches the look of your console.

The only thing you can — and should — criticise is that the TV only provides two full HDMI 2.1 ports, while the other two are older HDMI 2.0. That creates quite a practical problem, because one of those fast ports also handles the eARC (enhanced Audio Return Channel). In practice, that means if you connect a soundbar or home theatre system to the TV, you’ll be left with only one free HDMI 2.1 input. If you have two consoles or a console and a powerful PC at home, you’ll unfortunately have to give something up or keep swapping cables at the back if you want convenient control of your audio system.

In terms of gaming features the TCL A400 Pro performs brilliantly. The TV has practically everything you’d expect from a gaming TV today: support for 4K at high refresh rates, VRR, ALLM, correct implementation of HDR formats in games, including Dolby Vision, and HGiG. That means it works well with both next‑gen consoles and PCs. Another plus is the inclusion of a Game Bar, a dedicated panel with the most important settings for gamers. From it you can quickly check basic information about the signal, refresh rate or active features, and customise the appearance and behaviour of some settings to your preferences. It’s a solution that may not change picture quality by itself, but it greatly improves the convenience of using the TV while gaming. The only thing to criticise is the number of full HDMI 2.1 ports. The A400 Pro has only two such ports out of four, and one of them also serves as eARC. In practice this means that if you want to connect two next‑gen consoles and a soundbar you may run into some limitations. In that scenario you’ll need to either swap devices or use extra equipment, such as an AV receiver or a soundbar with HDMI inputs. Even so, it’s hard not to rate the A400 Pro very highly as a gaming TV. The gaming feature set here is genuinely powerful.