TCL C7K / QM7K 55"-85" vs Philips PUS7000

In terms of brightness, the models ranging from 55 to 85 inches in the C7K series are truly impressive. Under optimal testing conditions, the 65-inch screen exceeded 1200 nits, which in practice means that the brightest scenes can dazzle with almost cinematic brilliance. These are not just dry figures from measurements – during screenings, bright skies, explosions, or reflections of light on water looked incredibly striking, often giving the impression that the television exceeds its price range. This is particularly effective in scenes with large areas of illumination, where the screen fills with intense brightness – for instance, in sun-drenched shots or during dynamic action sequences. Viewers looking for strong HDR will definitely be satisfied.

However, scenes that require precise backlight control – with tiny points of light against a dark background – prove to be more challenging. Here, the C7K, despite having over a thousand zones, can still dim brightness to maintain deep blacks. The effect is that in films like Sicario 2 or LIFE of Pi, some details, such as a distant lighthouse or single reflections, may appear less distinct or blend into the surroundings. This is a compromise inherent in MiniLED technology – it provides excellent image depth and blacks at a level not offered by standard LCDs, but this comes at the cost of limited visibility of the tiniest lights.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The new feature in TCL TVs for 2025 is the long-awaited Filmmaker mode, which until now has been found in most competing brands. This is great news, as this mode is regarded as the one that best represents the original vision of the creators and is often recommended by enthusiasts of good picture quality. Unfortunately – as is often the case – the mere presence of it does not guarantee perfection. The Filmmaker mode in the TCL C7K is not without its flaws. One could critique the incorrect white balance, particularly the slight dominance of blue, which caused cool, slightly greyish skin tones. But that was not the biggest issue. The main complaint was the excessive brightness exposure, which is clearly visible on the gamma and EOTF graphs. The picture was simply too bright, at times even blown out, which affected not only the richness of the scenes but also the overall viewing experience. Some details were simply lost, and the whole image looked as if someone had overdone the brightness slider a bit. As always – we decided to see what could be squeezed out of this after calibration. And that’s where it started to get really interesting…

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

After calibration, the TCL C7K put on a really good show, especially when it comes to SDR content. We managed to precisely tune the white balance, colour gamut, and brightness characteristics, resulting in colour errors on the ColorChecker palette dropping below a value of 2. For the uninitiated – this is an almost perfect score, meaning the image is very close to what the creators intended. Unfortunately, things didn’t look as good with 4K HDR content. While we managed to slightly calm down the white balance and correct its previous errors, it still shows that the TV has some "MiniLED traits," especially in brightness management. When we checked how the C7K handles the EOTF curve on actual movie scenes, rather than just synthetic test patterns, it turned out that the screen still has a tendency to slightly brighten the entire image. This affects the overall experience – blacks lose some depth, and the image becomes less contrasty than it should be. Despite these minor shortcomings in HDR content, the overall reception of materials – especially in SDR – is really very good. After calibration, the C7K can display an image that can successfully compete with much more expensive models. Good tuning of colours, natural skin tones, and pleasant brightness make movie sessions and everyday content viewing more than satisfying.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

TCL C7K comes with a feature that, according to the manufacturer, aims to smooth out unwanted colour transitions – something like a rescue for less successful tonal changes. It's called "Gradual Smoothing" and... well, it sounds ambitious, but in practice, it works very poorly. Regardless of whether we set it to low or high, the difference is minimal. And worse still – the feature can cut out elements from the image that should remain. Fortunately, film grain is left untouched, so at least it doesn't smooth everything indiscriminately, but even so – it's best to just turn this option off.

When it comes to upscaling lower resolution content, it's already better. SD and HD materials look quite decent, although at times we felt that the image loses sharpness and becomes too soft – as if something had taken away its clarity. Fortunately, with very low sources (e.g. 576p), there was no overscan effect, meaning the image wasn't artificially cropped – everything fit on the screen as it should.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

TCL C7K handles motion smoothness really well. The panel used in it offers a refresh rate of 144 Hz, which alone suggests that this TV is more than just a regular "60 Hz" panel. Moreover, if we connect the C7K to a computer and set the resolution to Full HD. But we will write more about this in the section for gamers and PC compatibility. Returning to everyday use – both sports and movies look very good here. Thanks to the quick panel and the well-functioning motion smoothening feature, the C7K is great for watching matches as well as for movie screenings. In the menu, we find two sliders – blur reduction and flicker reduction – that allow adjusting the smoothness effect to personal preferences. At lower settings, we get a more cinematic effect, with a slight judder. At higher settings – the image becomes more theatrical, smoothly even to excess. Whatever your taste, everyone can set it to their liking.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

TCL C7K is a TV that on paper looks like the dream gear for a gamer – and most importantly, it also holds up in practice. First, the good news: we have two HDMI 2.1 ports with full bandwidth, so we can easily connect both a console and a computer, making use of all their capabilities. The panel itself supports a refresh rate of 144 Hz, which gives a considerable advantage in fast-paced games. On top of that, it comes with a full suite of gaming features: VRR (variable refresh rate), ALLM (automatic low latency mode), and Dolby Vision support in games. There’s also an HGiG mode that provides an HDR effect aligned with the creators' intentions. GameBar, which is an information bar for gamers. It operates quickly, looks clear (like a Nintendo console👌), and displays what matters most: the current frame rate, VRR status, and even HDR parameters.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.