TCL C69K / Q6C vs TCL A400 PRO

In terms of brightness, TCL C69K / Q6C is a moderate model. In optimal movie conditions, it shows its full potential, reaching a maximum of around 600 nits. In scenes with large, intense light sources, the HDR effect can be truly satisfying, giving a cinematic glow. However, it's important to keep in mind that when managing the backlight zones, there are situations where parts of the image are dimmed, and at times become barely visible. This suggests that there is still a lack of proper optimization of the algorithms, although considering the technical parameters in this price range, the overall construction still looks very good.

The TCL A400 Pro is a moderately bright TV. Its peak brightness reaches around 600 nits. That level already allows for a real HDR effect and in many films it does deliver a noticeably more appealing picture than in SDR. However, it’s not a level that dazzles by brightness alone. The A400 Pro is not one of those TVs that bombard the viewer with a powerful flash in every dramatic scene. The biggest limitation is visible with small bright elements on a dark background. Because of fairly aggressive zone control, the TV can significantly reduce their brightness, in extreme cases down to around 100 nits. That means small lights, sparks, stars or single highlights can be much less visible than they should be. It should be added, though, that this isn’t done without reason. The A400 Pro does this to keep black levels as deep as possible and to limit the halo effect around bright objects. It’s a deliberate compromise: the TV more often opts for deeper blacks rather than maximising point highlights. On the one hand this is understandable, especially given a limited number of dimming zones, but on the other you should be aware that the HDR effect won’t always be as strong as the peak brightness alone might suggest.

On the plus side, the colours are a strength. The PFS LED filter used here, marketed by the manufacturer as QLED, delivers suitably saturated colours. Our measurements showed about 94% coverage of the DCI-P3 gamut and around 74% of BT.2020, which is a solid result for this class.

The Filmmaker Mode, which has been introduced in this year's TCL TVs (including the C69K / Q6C), is definitely the best choice "to start with". This is the mode we recommend for everyday movie and series viewing. Unfortunately, as is often the case, best does not mean perfect. In SDR materials, the image turned out to be too warm, with a strong red tint in the white balance. The opposite impression was had with HDR content – here the image became cooler than it should have been, due to an excess of blue. Additionally, there is the brightness characteristic, which at times resulted in overexposures. In practice, this translated to fairly noticeable errors in color tests, which is difficult to accept in a mode branded as "by the creators".

As usual, we carried out colour measurements in the best‑tuned picture mode, Filmmaker Mode, the one intended to be closest to the creators’ intentions. The A400 Pro, of course, also offers other picture modes, but in practice they show much larger colour errors and interfere more with the image character. So we won’t cover them in detail in this part of the review. How does the factory colour reproduction fare? In short: really very well. In fact, looking at our measurements, it’s excellent. Both the white balance and the luminance response were set surprisingly precisely. The errors were so small that during the measurements we genuinely rubbed our eyes in surprise. Such good factory settings don’t happen often, even in televisions running Filmmaker Mode. All the more reason to praise TCL, because the A400 Pro straight out of the box can produce an image very close to how the source material should look. The results were so good you could easily think someone had already given this unit extra attention and tried to calibrate it. Our one bit of nitpicking comes down to a single issue. In SDR material the image was slightly brighter than the reference for a dark room, because the factory gamma was set closer to 2.3 than 2.4. It’s not a large error and most viewers probably won’t even notice it. We should note, however, that we are talking about our specific test unit. There can always be some variation in factory colour between individual units, production batches or screen sizes. We do not assume every A400 Pro will look identical straight out of the box.

Through white balance adjustment, we were able to significantly reduce the tendency of ChooseTV C69K / Q6C to distort colours, which resulted in a very good final outcome. After calibration, the problem of excessive warming of scenes in SDR and over-cooling of the image in HDR disappeared. However, it's worth analysing the brightness characteristics more closely. While in SDR content there are few complaints – the picture looks really good, especially in older films, TV programmes, or on YouTube – it performs much worse with HDR content. Analysis of the EOTF curve suggests that everything is fine, but in practice (EOTF in films), the limitations of the actual construction become evident. This model tends to excessively brighten small parts of the frame, while in other situations, it darkens the entire scene too much. The effect of calibration is therefore undeniable, and in terms of colourimetry, ChooseTV C69K / Q6C gains a lot. Unfortunately, certain limitations arising from local dimming management simply cannot be bypassed.

Despite the outstanding factory tuning, we couldn't resist checking how the TCL A400 Pro would respond to professional calibration. With such a strong starting point, we were especially curious whether we could squeeze even more from this TV. And here we have to boast: we managed to bring our sample to absurdly low colour errors. Results below 1 are something you don't see every day, even on very good TVs. Such outcomes are more often associated with professional reference monitors than with a lifestyle TV for the living room. In terms of white balance and colour reproduction, the A400 Pro after calibration simply excelled. The only thing we can pick on after closer analysis concerns the brightness response. The TV can vary the luminance level depending on the content being displayed, and quite often the picture is a little darker than it should be according to the reference. This most likely stems from the way the Mini-LED backlight and the local dimming algorithms work in this model. That said, it doesn't ruin the overall impression, because in terms of colour precision the A400 Pro after calibration reached a level that was genuinely hard to expect.

In terms of image scaling, TCL C69K / Q6C performs quite well. Lower quality content is presented acceptably, and due to the lack of overscan issues, the image is displayed in full without any cropping. However, don’t expect miracles – materials of very low quality won’t gain a second life here, as the image processor has its limitations.

On thin lines and details, there is noticeable jaggedness, which reveals the lack of more advanced image enhancement algorithms. It's also a shame that the C69K / Q6C lacks a feature for smoothing tonal transitions. As a result, in older films or video materials, color banding can be visible and may become distracting during extended viewing.

Digital image processing is unfortunately one of the weaker points of the TCL A400 Pro. That does not mean the TV performs badly, but it’s hard to call it anything clearly above standard. The upscaling itself is acceptable: edges are fairly well smoothed, the picture does not look overly sharp or “pixelated”, and lower-quality material can be watched without major discomfort. At the same time the overall image has a slightly soft character and you don’t see the kind of precision that the best image processors in more expensive TVs can offer.

Handling of tonal transitions caused by heavy compression is much worse. TCL equipped the A400 Pro with a “Gradual Smoothing” feature that in theory should reduce visible colour banding and artefacts in lower-quality material. In practice, however, its effectiveness is very limited. It does not improve tonal transitions in any noticeable way, and at higher settings it can further smooth image detail, giving it an artificial, slightly blurred character. For that reason we think it’s best to leave this feature off. The A400 Pro copes decently with basic image scaling, but if you often watch heavily compressed material with visible posterisation, this model will not be one of the best choices.

The use of a 144 Hz panel in TCL C69K / Q6C is a significant advantage in this price range. This represents an important step forward compared to its predecessor (C655 PRO), which only offered 60 Hz at 4K. The difference is particularly noticeable when watching sports or gaming – the ball, players, and dynamic action in games are displayed more clearly and without losing detail. An interesting feature is also the panel's ability to operate at 240 Hz (which the manufacturer does not officially mention) – we will revisit this topic in relation to the PC gaming mode. TCL has also added a feature for movie fans: “Motion Clarity.” This allows users to adjust the picture to their own preferences using two simple sliders. We can either leave the visible film frame or opt for a very smooth one, "

The TCL A400 Pro is equipped with a 144 Hz panel, but in practice we're most interested in how it performs at 120 Hz. That's the refresh rate most consoles, as well as many sports broadcasts and high-motion sources, are limited to today. In that range the TV performs quite well. Motion clarity is really good, especially after properly configuring the motion smoothing. The 'Motion Clarity' function improves smoothness. Its settings include two sliders that let you tailor the motion smoothing to your preferences, separately for low-frame-rate and high-frame-rate content. This allows you to achieve either a more cinematic look or a noticeably smoother image. If you don't want to fiddle with manual configuration, you can use built-in presets such as Low, Medium, High, Cinema or Nature.

TCL C69K / Q6C is a television that can confidently be called equipment designed for gamers. Here we have 4K at 144 Hz, VRR support, automatic game mode (ALLM), and Dolby Vision Gaming. Additionally, there's a practical Game Bar, which is a panel with the most important settings within easy reach – handy when we want to change something quickly during gameplay (e.g., aspect ratio: Yes, it can be done!). The wide range of VRR, reaching up to 240 Hz, is noteworthy. However, this option is mainly for PC gamers looking to go below native 4K resolution. In this case, the television can spread its wings and show additional smoothness, particularly in fast e-sport titles. For consoles, we stick to the standard limit of 120 Hz, but even so, the possibilities are truly extensive. The only minor criticism is slight ghosting that can sometimes be seen in dynamic scenes. Other than that, C69K / Q6C offers everything gamers expect from a television.

In terms of gaming features the TCL A400 Pro performs brilliantly. The TV has practically everything you’d expect from a gaming TV today: support for 4K at high refresh rates, VRR, ALLM, correct implementation of HDR formats in games, including Dolby Vision, and HGiG. That means it works well with both next‑gen consoles and PCs. Another plus is the inclusion of a Game Bar, a dedicated panel with the most important settings for gamers. From it you can quickly check basic information about the signal, refresh rate or active features, and customise the appearance and behaviour of some settings to your preferences. It’s a solution that may not change picture quality by itself, but it greatly improves the convenience of using the TV while gaming. The only thing to criticise is the number of full HDMI 2.1 ports. The A400 Pro has only two such ports out of four, and one of them also serves as eARC. In practice this means that if you want to connect two next‑gen consoles and a soundbar you may run into some limitations. In that scenario you’ll need to either swap devices or use extra equipment, such as an AV receiver or a soundbar with HDMI inputs. Even so, it’s hard not to rate the A400 Pro very highly as a gaming TV. The gaming feature set here is genuinely powerful.