TCL C655 / C69B 98' vs TCL RM7L

The quality of the HDR effect on TCL C655 / C69B looks quite promising. The average value in the test charts is around 450 nits, which already allows one to feel the brilliance of light effects and better image dynamics. However, as previously mentioned, this effect can be somewhat dampened by slight differences in bright and dark shades due to the lack of local dimming technology. However, the coverage of the DCI-P3 colour gamut at 94% is commendable, and this is possible thanks to the use of a quantum dot (QLED) panel. As a result, the colours are vivid and well-reproduced when watching HDR content.

TCL RM7L is a bright TV. In our measurements its peak brightness hovered around 1600 nits. That’s noticeably less than the C7L, which can get close to 2600 nits, but in real-world film scenes the difference between the models isn’t that large. In less demanding shots, where plenty of bright elements appear on screen, the RM7L can sustain around 1000 nits, and sometimes even a bit more, approaching 1500 nits. It performs worse in dark scenes with small points of light; then their brightness can fall to about 500 nits. This behaviour isn’t random. The TV deliberately dims small elements to better control the backlight and preserve higher contrast. This comes at the expense of their intensity, but it’s typical for TVs with local dimming in a similar price range.

Colour gamut coverage

In HDR brightness isn’t the only thing that matters, colour does too. Here the RM7L has a lot to show. Colours are strongly saturated and the wide colour gamut is one of its main strengths. In our measurements it reached about 96% of DCI-P3 and around 83% of BT.2020. It’s worth remembering, though, that on a TV with this kind of backlight the result can vary depending on the scene. On test patterns colours look best, while in films their saturation can be a little lower than on SQD Mini LED or QD-OLED TVs. The backlight design itself is interesting. The RM7L doesn’t use the classic red, green and blue LED set. TCL used two green LEDs and one blue, with red produced via a PFS phosphor. You can see this in spectrometer measurements, but it doesn’t have a major impact on the picture. Colours are still rendered correctly.

The TCL C655 / C69B television offers a film mode that has been tested for colour reproduction quality. Although this mode is called film mode, unfortunately, it has quite a few issues that a director would definitely not want to see when filming their work. Starting with image analysis, it's worth examining the white balance – both in HD and 4K HDR content, the white balance has significant errors. In both cases, the red colour dominates, which makes the colours too warm, and the overall effect takes on a pink or yellow tint. The Colour Checker test confirms these errors – the colour samples veer into incorrect shades, which impacts the overall colour fidelity. A less significant issue is the brightness characteristic. However, it is also not free of flaws. The gamma chart shows a strong spike at the beginning, which can cause the image to be overly bright, and the EOTF curve responsible for brightness in 4K HDR materials also shows considerable fluctuations – it is evident that the television struggles to maintain the appropriate brightness, but it does not always succeed effectively.

Factory colours were checked in Filmmaker Mode, the best picture setting available to the user. TCL has been using it in its TVs for two years, and its purpose is to reproduce the image as faithfully as possible to the filmmakers' intent. On the RM7L it was indeed the best calibrated mode, though not without faults. The biggest issue was the white balance. An excess of red and blue made the image shift slightly toward pink tones. This was visible in both SDR and HDR. In addition, the brightness response was slightly boosted, so the picture looked a little brighter but at the same time less contrasty than it should.

After calibrating the movie mode of the TCL C655 / C69B television, the white balance has been adjusted, and the colours look as they should – confirmed only by slight deviations in the Colour Checker test. The gamma is really accurate, which means the television shouldn’t have issues with brightness in low-resolution materials. Unfortunately, a similar EOTF characteristic is still visible, which is a natural phenomenon in televisions that do not have local dimming – it’s just difficult for them to "shine" brighter in a given part of the screen. Despite this construction limitation that cannot be bypassed, we recommend adjustments in the settings, as the overall colour presentation looks really very good.

Thanks to a fairly extensive calibration menu we managed to correct the vast majority of the issues described earlier. The biggest change was the white balance. After calibration it looks very good, so the image has lost its pinkish tint and become much more neutral. The luminance response has also improved. Both the SDR gamma and the HDR EOTF curve are now much closer to the reference values. The picture is no longer unnecessarily bright, and darker parts look more natural and have greater depth. Better luminance accuracy has also affected the colours, which after calibration are noticeably more accurate. Not everything could be set perfectly though. In HDR material the RM7L still interprets part of the signal in its own way and doesn’t always stick exactly to the reference curve. You can see this mainly in some darker scenes, where the TV can either slightly lift the shadows or darken them completely. That’s where the earlier impression of a slightly brightened, less contrasty image came from. Even so, the calibration delivers a very good result here. It removes the most visible errors and, above all, makes the picture much closer to how it should look.

The TCL C655 / C69B TV handles tonal transitions well in lower quality materials. The “Gradual Smoothing” function at its lowest setting effectively eliminates visible banding, but it also results in a loss of detail, for example, in the texture of objects. A plus is that it does not interfere with film grain, allowing the image to maintain a natural look.

In terms of digital processing, the TV adds a significant amount of artificial sharpness, which may appeal to those who prefer a vivid image. For those who prefer a more subtle rendering of details, this may be a drawback. Another downside is the quite aggressive overscan – the image is cropped, which leads to the loss of fragments at the edges and limits the field of view.

Upscaling and digital image processing are not the RM7L’s strong points. TCL has used a MediaTek Pentonic 700 chipset here, labelled MT5896, which isn’t among the best processors at handling lower-quality sources. The biggest issues appear with heavily compressed content from YouTube or regular broadcast TV. The processor can’t effectively hide posterisation and the characteristic banding between shades. The feature meant to smooth these issues does little to help and can also interfere with the picture too much, smoothing faces and fine textures, for example. For that reason it’s best not to use it.

Plain upscaling to 4K looks better. Lower-quality sources are reasonably sharp and retain a sufficient amount of detail. It’s not on a par with the best processors on the market, but for everyday viewing the result is perfectly acceptable.

Unlike the smaller versions, the 98” model stands out with significantly better motion fluidity. Instead of the standard 60 Hz, this colossal screen is equipped with a full 144 Hz panel, which opens up entirely new possibilities – for both gamers and movie lovers. With its full motion smoother, the television delivers incredible image fluidity, eliminating ghosting and improving the comfort of watching dynamic scenes. It's worth noting that this technology operates across the full refresh rate range, meaning there's no need to compromise between fluidity and quality. Additionally, the "Flicker Reduction" feature allows you to adjust the fluidity to your own preferences – you can choose a more cinematic effect with visible frame rate or a maximally smooth image.

The RM7L uses a 144 Hz VA panel, so right from the start it's well prepared for sports, games and other dynamic content. The high refresh rate also gives the motion interpolation more room to work, so it can generate additional frames. On the RM7L it performs well and, when set correctly, can noticeably improve motion smoothness without producing an excessive soap opera effect.

The 98-inch TCL C655 / C69B is excellently equipped for gamers. Full-featured HDMI 2.1 ports and a 144 Hz panel allow for gaming in 4K at 120 Hz, providing the smoothness and responsiveness that will impress even the most demanding.

The TV supports variable refresh rate (VRR), eliminating screen tearing, while the automatic low latency mode (ALLM) ensures that gaming starts instantly, without the need for manual adjustment of settings. There is also support for Dolby Vision and HGiG, ensuring that the image quality in games is even better – details are sharp, colours are natural, and contrast is perfectly balanced.

Additionally, the TV offers a dedicated gaming panel that allows for quick adjustment of picture settings without the need to exit the game. It’s a device that meets practically all the requirements of the modern gamer.

When it comes to gamer-focused features, there's almost nothing but praise for the RM7L. The TV supports ALLM, VRR, Dolby Vision Gaming and works correctly with HGiG, so it's hard to point to any major gaps in that area. In practice that means automatic switching to a low-latency mode, smoother motion with variable frame rates and accurate brightness reproduction in HDR games. There's also a handy Game Bar. From it you can quickly check the frame rate, VRR status, signal format and aspect ratio, and change key settings without leaving the game. TCL has added a few extra options too, such as an on-screen reticle and brightening of dark areas, which can be useful in some titles. The biggest downside comes from using the Pentonic 700 processor. Only two of the four HDMI ports support the full HDMI 2.1 standard. With a single console that won't be a big issue, but if you hook up two consoles and a PC you might run out of ports, especially since one of those ports may also be needed for eARC and a soundbar.