TCL A400 PRO vs Samsung QN80H

The TCL A400 Pro is a moderately bright TV. Its peak brightness reaches around 600 nits. That level already allows for a real HDR effect and in many films it does deliver a noticeably more appealing picture than in SDR. However, it’s not a level that dazzles by brightness alone. The A400 Pro is not one of those TVs that bombard the viewer with a powerful flash in every dramatic scene. The biggest limitation is visible with small bright elements on a dark background. Because of fairly aggressive zone control, the TV can significantly reduce their brightness, in extreme cases down to around 100 nits. That means small lights, sparks, stars or single highlights can be much less visible than they should be. It should be added, though, that this isn’t done without reason. The A400 Pro does this to keep black levels as deep as possible and to limit the halo effect around bright objects. It’s a deliberate compromise: the TV more often opts for deeper blacks rather than maximising point highlights. On the one hand this is understandable, especially given a limited number of dimming zones, but on the other you should be aware that the HDR effect won’t always be as strong as the peak brightness alone might suggest.

On the plus side, the colours are a strength. The PFS LED filter used here, marketed by the manufacturer as QLED, delivers suitably saturated colours. Our measurements showed about 94% coverage of the DCI-P3 gamut and around 74% of BT.2020, which is a solid result for this class.

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000‑nit mark, which on paper already promises a solid HDR effect. In practice the screen really shows its stuff, although it can't always fully spread its wings (or its backlight 🤔). The best impression comes from bright, wide shots. Sunlit landscapes or heavily lit scenes look really good on it. Brightness then sits around 700 nits, which delivers a noticeable step up compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim those aggressively to protect black depth at all costs. On one hand you get better contrast, on the other... you lose dynamics and the sparkle of fine HDR detail. The TV therefore has plenty of potential, but the local‑dimming algorithm can be too restrictive.

Colour‑gamut coverage

Colour-wise it’s also good. The QN80H uses quantum‑dot technology, and in our measurements it covered 93% of the DCI‑P3 colour space and about 70% of BT.2020. Those results won't drop anyone's jaw today, but in real‑world use they’re more than enough to deliver a vivid and natural picture for most films and series. Colours are suitably saturated and, after proper tuning, they don't look artificial or overly aggressive.

As usual, we carried out colour measurements in the best‑tuned picture mode, Filmmaker Mode, the one intended to be closest to the creators’ intentions. The A400 Pro, of course, also offers other picture modes, but in practice they show much larger colour errors and interfere more with the image character. So we won’t cover them in detail in this part of the review. How does the factory colour reproduction fare? In short: really very well. In fact, looking at our measurements, it’s excellent. Both the white balance and the luminance response were set surprisingly precisely. The errors were so small that during the measurements we genuinely rubbed our eyes in surprise. Such good factory settings don’t happen often, even in televisions running Filmmaker Mode. All the more reason to praise TCL, because the A400 Pro straight out of the box can produce an image very close to how the source material should look. The results were so good you could easily think someone had already given this unit extra attention and tried to calibrate it. Our one bit of nitpicking comes down to a single issue. In SDR material the image was slightly brighter than the reference for a dark room, because the factory gamma was set closer to 2.3 than 2.4. It’s not a large error and most viewers probably won’t even notice it. We should note, however, that we are talking about our specific test unit. There can always be some variation in factory colour between individual units, production batches or screen sizes. We do not assume every A400 Pro will look identical straight out of the box.

The QN80H’s factory settings performed really well, especially compared with most TVs that come through our tests. Of course we took measurements in Filmmaker Mode, and that’s the mode we recommend switching on right after the initial setup. For SDR content our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to spot without test equipment. The only weaker point was the gamma. In brighter parts of the picture the TV brightened them a little too much, so the image sometimes lost some depth. Even so, we wish most TVs looked this good straight out of the box.

It was a bit worse in HDR. The white balance was still set correctly, so the issue wasn’t colour but the way the QN80H managed image brightness. You could see that straight away on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, very small highlights were often dimmed too much at the same time. As a result some fine details simply disappeared. The factory Filmmaker mode in HDR isn’t bad, but it’s definitely not as well tuned as it is in SDR.

Despite the outstanding factory tuning, we couldn't resist checking how the TCL A400 Pro would respond to professional calibration. With such a strong starting point, we were especially curious whether we could squeeze even more from this TV. And here we have to boast: we managed to bring our sample to absurdly low colour errors. Results below 1 are something you don't see every day, even on very good TVs. Such outcomes are more often associated with professional reference monitors than with a lifestyle TV for the living room. In terms of white balance and colour reproduction, the A400 Pro after calibration simply excelled. The only thing we can pick on after closer analysis concerns the brightness response. The TV can vary the luminance level depending on the content being displayed, and quite often the picture is a little darker than it should be according to the reference. This most likely stems from the way the Mini-LED backlight and the local dimming algorithms work in this model. That said, it doesn't ruin the overall impression, because in terms of colour precision the A400 Pro after calibration reached a level that was genuinely hard to expect.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we were able to rein in how the QN80H handled brightness; it had been making most scenes too bright. After calibration the picture is calmer, more natural and much closer to a faithful reproduction.

Digital image processing is unfortunately one of the weaker points of the TCL A400 Pro. That does not mean the TV performs badly, but it’s hard to call it anything clearly above standard. The upscaling itself is acceptable: edges are fairly well smoothed, the picture does not look overly sharp or “pixelated”, and lower-quality material can be watched without major discomfort. At the same time the overall image has a slightly soft character and you don’t see the kind of precision that the best image processors in more expensive TVs can offer.

Handling of tonal transitions caused by heavy compression is much worse. TCL equipped the A400 Pro with a “Gradual Smoothing” feature that in theory should reduce visible colour banding and artefacts in lower-quality material. In practice, however, its effectiveness is very limited. It does not improve tonal transitions in any noticeable way, and at higher settings it can further smooth image detail, giving it an artificial, slightly blurred character. For that reason we think it’s best to leave this feature off. The A400 Pro copes decently with basic image scaling, but if you often watch heavily compressed material with visible posterisation, this model will not be one of the best choices.

The digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we've already seen in previous Samsung models and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without making it feel like the TV is trying to forcibly enhance the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, especially in low-bitrate streaming. However, you should remember it doesn't work without side effects. It can remove some film grain and slightly smooth the picture. So with a good-quality source we'd leave this feature turned off. If, however, banding and uneven tonal transitions bother you more than the loss of some grain, "Noise Reduction" can be a really useful addition.

The TCL A400 Pro is equipped with a 144 Hz panel, but in practice we're most interested in how it performs at 120 Hz. That's the refresh rate most consoles, as well as many sports broadcasts and high-motion sources, are limited to today. In that range the TV performs quite well. Motion clarity is really good, especially after properly configuring the motion smoothing. The 'Motion Clarity' function improves smoothness. Its settings include two sliders that let you tailor the motion smoothing to your preferences, separately for low-frame-rate and high-frame-rate content. This allows you to achieve either a more cinematic look or a noticeably smoother image. If you don't want to fiddle with manual configuration, you can use built-in presets such as Low, Medium, High, Cinema or Nature.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes the image at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach up to 240 Hz. That's new for Samsung TVs and a handy extra for people who want to use the TV for PC gaming. We were more interested, though, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. It does very well. The panel doesn't suffer much from the smearing typical of VA panels; faint trails behind moving objects are mostly visible on dark backgrounds. That's not something that would interfere with normal sports watching or gaming. The TV also has a motion smoothing system that Samsung calls "Picture Clarity". You can set judder reduction and blur reduction separately, so it's easy to tune it for films, sport or your own preferences.

In terms of gaming features the TCL A400 Pro performs brilliantly. The TV has practically everything you’d expect from a gaming TV today: support for 4K at high refresh rates, VRR, ALLM, correct implementation of HDR formats in games, including Dolby Vision, and HGiG. That means it works well with both next‑gen consoles and PCs. Another plus is the inclusion of a Game Bar, a dedicated panel with the most important settings for gamers. From it you can quickly check basic information about the signal, refresh rate or active features, and customise the appearance and behaviour of some settings to your preferences. It’s a solution that may not change picture quality by itself, but it greatly improves the convenience of using the TV while gaming. The only thing to criticise is the number of full HDMI 2.1 ports. The A400 Pro has only two such ports out of four, and one of them also serves as eARC. In practice this means that if you want to connect two next‑gen consoles and a soundbar you may run into some limitations. In that scenario you’ll need to either swap devices or use extra equipment, such as an AV receiver or a soundbar with HDMI inputs. Even so, it’s hard not to rate the A400 Pro very highly as a gaming TV. The gaming feature set here is genuinely powerful.

The Samsung QN80H is a TV that performs very strongly when it comes to gamer-focused features. The biggest new feature for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still investing heavily in the gaming side of its TVs. The list of advantages doesn't end there. The QN80H has four full HDMI 2.1 ports, which at this price point still isn't standard. So you can connect multiple consoles, a PC or a soundbar at once and not worry about which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which could matter especially for Xbox Series X owners. However, this isn't a flaw that rules the QN80H out as a gaming TV. Samsung does have a feature that most manufacturers still lack, namely its proprietary motion smoothing, Game Motion Plus. This motion smoother also works in game mode, improving the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby's codec, especially in more demanding games that don't offer a 60 fps mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped gaming TVs in its class.