Sony X75WL vs TCL C7L

The luminance chart for the X75WL Sony television showed a maximum value of 350 nits, which unfortunately is not an impressive result. The television does not surprise with its brightness, and all the HDR scenes we tested lacked depth and the appropriate lighting effect that should accompany HDR content. Additionally, the tragic coverage of the DCI-P3 colour palette makes it difficult for the television to reproduce rich colours, which significantly affects the overall viewing experience of HDR content. The lack of adequate brightness and poor colour coverage means that HDR effects are very limited in this model.

TCL C7L is undoubtedly an extremely bright television. In synthetic tests on static patterns, it can achieve peak brightness of around 2800 nits. This is a phenomenal result, considering the price range it occupies. Unfortunately, tests with real movie scenes are not as spectacular as measurements of white squares. Brightness in real HDR footage drops in the C7L model to around 1200 nits. This is still a very good result, as this is the value at which the vast majority of contemporary films are mastered. However, when small, point-like elements appear on the screen, the brightness of these details drastically drops – even to around 400 nits – which somewhat diminishes the HDR effect. The television does this intentionally to maintain a better black level and to avoid a huge light bloom. This is somewhat explainable, but it also shows that Mini LED technology is not completely uncompromising in this regard. As for the HDR effect itself – alongside brightness, colours are of course key here. And these, thanks to the use of new, “super” quantum dots, are simply outstanding and among the best on the market. The television can achieve around 90% coverage of the ultra-wide colour gamut BT.2020 and 99% of the DCI-P3 gamut, easily matching the best RGB MINI-LED screens. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which can often be problematic in competing RGB Mini-LED televisions.

Colour reproduction tests for the model Sony X75WL are conducted in film mode, which offers the best picture settings but also has its flaws. The biggest issue with the X75WL Sony is the white balance – for both HD and 4K HDR content – which is characterised by a dominance of blue. As a result, the entire image feels too cool. The colour checker confirms these errors, showing that colours lean towards cooler shades. Regarding brightness characteristics, the contrast gamma is at quite a decent level; however, the same cannot be said for the EOTF curve. There are significant issues with maintaining the appropriate brightness – the image is either too bright or too dim, which affects the visual perception of the content.

When it comes to out-of-the-box colours, a new feature in TCL TVs – including the C7L model – is the presence of a new picture mode called Filmmaker Mode. This is significant news, as such a mode was not previously available from this manufacturer. By design, as the name suggests, the picture in this setting is intended to be delivered with the full intent of the film's creator. After our tests, we can confirm that it is undeniably the best built-in mode in this TV if you value true-to-life colour reproduction straight out of the box. However, we certainly wouldn’t say it is perfect. Like most devices on the market, this C7L also had its factory faults. The white balance in Filmmaker Mode leaned towards a slightly greenish-yellow hue, mainly due to an excess of green component and a noticeable lack of blue. Of course, for the average viewer, this won’t be a drastic flaw, but if you value perfect whites, natural skin tones, and harnessing the full potential of these new "super" quantum dots from the structure, then the TV is begging for professional calibration.

X75WL Sony is one of those cases where image calibration may not be heavily spectacular, but it provides a very good improvement in colour perception. The white balance, both for HD and 4K materials, has been significantly improved – we no longer have a strong dominance of cooler shades. The gamma curve also appears more stable, which translates to better image quality. However, the biggest issue remains the EOTF curve, which is responsible for brightness in 4K materials. Due to the technological limitations of the television (IPS panel and lack of local dimming technology), it's hard to talk about significant improvement, as we can't squeeze more out of this model. Despite these limitations, the tonality of the image has been significantly improved.

After conducting a professional calibration, we were able to greatly improve the situation in the factory Filmmaker Mode. Following our adjustments, the errors in the ColorChecker test and across the entire wide colour gamut dropped below the threshold of human perception – that is, below a value of 3, which is indeed a very good result. The TCL C7L definitely benefits from such a treatment in terms of colour fidelity, and it's hard to deny that. However, the management of brightness in HDR content after calibration appears to be a bit worse. As I described earlier – even though we set this model up properly, when we turn on real film scenes on the television, it can manage its brightness in quite a peculiar way. It often brightens certain elements on the screen in a manner inconsistent with the creator's intent, which is visibly apparent on the EOTF graphs measured in specific films. Despite this flaw – or rather, this specific characteristic of the television – one cannot take away from it: after calibration, the C7L was able to reproduce the colours flawlessly.

In the case of low-quality tonal transitions, the Sony X75WL television performs poorly. The lack of any feature to improve tonal transitions results in noticeable imperfections in colour gradation. However, it can be noted that the digital processing is quite good – the image is displayed without overscan, and the overall presentation is relatively good thanks to the added slight sharpness, which some users may appreciate.

This point could be called in a sense the Achilles' heel of the C7L model. Unfortunately, this television uses an older chipset from MediaTek – the Pentonic 700 – which has never been known for outstanding digital image processing. This is clearly visible in the functioning of the gradual smoothing feature, which is responsible for reducing jagged edges and removing digital noise. It simply works very poorly – when set to a low level, its effectiveness is practically none. The only small plus here is that the algorithm doesn't mess up anything else in the image and doesn't forcefully blur details. The upscaling, that is, the scaling of the image from lower resolutions to 4K, performs a bit better. It is simply adequate and does not stand out in any particular way against the competition. However, it cannot be denied that the C7L would greatly benefit in this aspect if the manufacturer decided to use the newer Pentonic 800 processor, which is now being found in an increasing number of competitive models.

The X75WL Sony television features a 60 Hz panel, making it more suitable for watching movies than for fast-paced gaming. This model includes a motion smoother called Motionflow, which allows the user to adjust the picture on a 10-point scale. Smoothness adds intermediate frames, thus increasing motion fluidity, and the image becomes more theatrical while minimising the judder effect. Clarity reduces motion blur, which is especially useful during fast-paced scenes, such as sports or dynamic action in films. With this feature, the user can tailor the fluidity and sharpness of motion to their own preferences.

TCL C7L features a native 4K panel with a refresh rate of 144 Hz, which can even ramp up to 288 Hz at lower resolutions when using a PC. These are certainly very high and commendable figures on paper, but in everyday life, it's worth remembering that almost all dynamic content you display on this television will still revolve around a maximum of 120 Hz. To tame this dynamism, the TV menu includes a motion smoothing system called "Motion Clarity." It offers several predefined modes, including a user mode, which we highly recommend setting manually using our tried-and-true guides on our YouTube channel. You’ll find two key sliders available. The first one, "Motion Blur Reduction," is responsible for reducing blurring and improving sharpness in 60fps dynamic content, such as sports broadcasts. The second slider, "Flicker Reduction," allows for the addition of artificial frames in movies and shows recorded at cinematic 24 or 30 frames per second. This naturally allows for the complete elimination of the annoying stutter effect during camera movement shots.

X75WL is not the best TV for gamers. It only has the ALLM (Auto Low Latency Mode) feature and a basic Game Bar, which are not sufficient to satisfy more demanding users. In this price range, one would expect support for features such as VRR or 120 Hz refresh rates – although in FULLHD, which are already standard – unfortunately, they are lacking here. This is a big downside for Sony, as the competition offers much more for gamers in a similar budget.

When it comes to gaming, the TCL C7L is simply an outstanding television for gamers. With the presence of two full-bandwidth HDMI 2.1 ports at 48 Gbps, it provides access to all the key features that console and high-end PC owners require. We have a well-functioning ALLM mode with very low input lag and VRR frame synchronization, which operates within an impressive range from 48 to 288 Hz. Importantly, unlike some competitors, TCL has ensured a proper implementation of the console HDR10 HGIG profile and support for Dolby Vision in games. This is complemented by a very well-designed gamer panel, known as Game Bar, which even allows for editing its appearance and changing the theme to perfectly match the style of your console.

The only thing that can – and should – be critiqued here is the fact that the television only offers two full HDMI 2.1 ports, while the other two are older HDMI 2.0. This creates quite a significant logistical problem. Why? Because one of those fast ports also supports the eARC audio return channel. In practice, this means that if you connect a soundbar or home theatre system to the television, you’ll only have one available HDMI 2.1 port left. If you have two consoles or a console and a powerful computer at home, unfortunately, you’ll have to give something up or constantly juggle cables at the back of the unit while maintaining comfortable audio system control.