Sony X75WL vs Sony Bravia 3 50' (VA)

The luminance chart for the X75WL Sony television showed a maximum value of 350 nits, which unfortunately is not an impressive result. The television does not surprise with its brightness, and all the HDR scenes we tested lacked depth and the appropriate lighting effect that should accompany HDR content. Additionally, the tragic coverage of the DCI-P3 colour palette makes it difficult for the television to reproduce rich colours, which significantly affects the overall viewing experience of HDR content. The lack of adequate brightness and poor colour coverage means that HDR effects are very limited in this model.

Interestingly, in the 50-inch version, the Bravia 3 performs slightly better in terms of brightness than its larger variants. In measurements, it achieved around 370 nits, which still aren’t values that can compete with top-tier TVs, but are sufficient to speak of a semblance of HDR effect. For some users, this level will be acceptable; others will consider it typical for SDR content, where striking highlights or strong contrasts are not expected. So it must be clearly stated that the Bravia 3 is not a TV for those who want to squeeze maximum quality from the most challenging film materials.

However, this doesn’t mean that everything is average. Sony has equipped this model with an additional PFS filter, which works similarly to the solutions used in QLED TVs. As a result, the coverage of the DCI-P3 colour gamut has increased to over 91 percent. In everyday use, this means livelier, more saturated colours and a more pleasant image quality. Even if it lacks strong lighting effects, movies and series can look significantly more appealing than in its predecessor, the X75WL.

Colour reproduction tests for the model Sony X75WL are conducted in film mode, which offers the best picture settings but also has its flaws. The biggest issue with the X75WL Sony is the white balance – for both HD and 4K HDR content – which is characterised by a dominance of blue. As a result, the entire image feels too cool. The colour checker confirms these errors, showing that colours lean towards cooler shades. Regarding brightness characteristics, the contrast gamma is at quite a decent level; however, the same cannot be said for the EOTF curve. There are significant issues with maintaining the appropriate brightness – the image is either too bright or too dim, which affects the visual perception of the content.

Sony Bravia 3 was primarily tested in movie mode, which immediately turned out to be the best choice among the factory settings. It's not a perfect picture, but compared to the eco mode that the TV suggests right out of the box, the difference is clear and positive. In movie mode, one can notice a certain issue: the image appears too warm, which stems from a lack of blue in the white balance. Nevertheless, in SDR content, the final effect can still be considered quite decent and satisfactory for everyday viewing. Much more serious errors emerge in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management combined with limited colour gamut coverage further exposes the shortcomings of the picture in this mode. All of this makes HDR on the Bravia 3 seem unconvincing and can spoil the impression left by the quite decent SDR content settings. Fortunately, this is not a hopeless situation. Various errors can be somewhat mitigated, and some can even be completely corrected through professional calibration. That's why we decided to check how the TV would perform after such adjustments.

X75WL Sony is one of those cases where image calibration may not be heavily spectacular, but it provides a very good improvement in colour perception. The white balance, both for HD and 4K materials, has been significantly improved – we no longer have a strong dominance of cooler shades. The gamma curve also appears more stable, which translates to better image quality. However, the biggest issue remains the EOTF curve, which is responsible for brightness in 4K materials. Due to the technological limitations of the television (IPS panel and lack of local dimming technology), it's hard to talk about significant improvement, as we can't squeeze more out of this model. Despite these limitations, the tonality of the image has been significantly improved.

The calibration allowed us to extract significantly more from the ChooseTV 3 than we could have expected at the beginning. Firstly, we managed to correct the deficiency of blue, which previously caused a noticeable warming of the image. After a slight adjustment in the white balance, most of the errors in the Color Checker measurements for SDR content practically disappeared. The shades of white gained a natural quality, and brightness management in gamma stabilised to an almost ideal level, not exceeding the threshold of human eye perception. Therefore, it can be confidently said that in SDR content, after a few tweaks in the settings, ChooseTV 3 performs really remarkably. Much worse, although still decidedly better than before calibration, are HDR contents. The white balance was managed to be sorted out, however, the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which is immediately noticeable. Colour-wise, the effect has also improved, although it is far from perfect – many errors still exceed the threshold of four, and even five delta E units, which means they remain visible to the human eye. It was already clear earlier that ChooseTV 3 is not a television designed to impress with HDR quality. Nevertheless, it is pleasing that in SDR content, after calibration, the image can look really great, and in this category, the television has positively surprised us.

In the case of low-quality tonal transitions, the Sony X75WL television performs poorly. The lack of any feature to improve tonal transitions results in noticeable imperfections in colour gradation. However, it can be noted that the digital processing is quite good – the image is displayed without overscan, and the overall presentation is relatively good thanks to the added slight sharpness, which some users may appreciate.

Bravia 3 brings more to the Sony TV family than just a shared name. It stands out primarily with its ability to enhance the quality of weaker materials thanks to the processor used. Of course, we won't find the advanced XR chip known from more expensive models here, but even so, it's fair to say that the image in lower resolutions looked surprisingly good. Scaling worked effectively, and most parts of the screen were devoid of the typical excessive edge tearing found in budget constructions. The feature that improves the fluidity of tonal transitions is also noteworthy. At the high setting, it performs quite well, effectively masking gradient imperfections without a significant loss of detail. It does occasionally happen that the algorithm smoothingly blurs elements that should remain sharp – for example, faces – however, in the overall assessment, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to those watching lower quality content.

The X75WL Sony television features a 60 Hz panel, making it more suitable for watching movies than for fast-paced gaming. This model includes a motion smoother called Motionflow, which allows the user to adjust the picture on a 10-point scale. Smoothness adds intermediate frames, thus increasing motion fluidity, and the image becomes more theatrical while minimising the judder effect. Clarity reduces motion blur, which is especially useful during fast-paced scenes, such as sports or dynamic action in films. With this feature, the user can tailor the fluidity and sharpness of motion to their own preferences.

The fluidity of motion has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that might appeal to those who are more sensitive to the way images are displayed. This refers to the proprietary motion smoother, Motion Flow, which offers users a lot of adjustment options. With it, you can make the picture smoother, almost theatrical, or stick to a more cinematic style with the characteristic judder, which many people simply associate with a filmic vibe. These functions work for content with lower frame rates, such as movies and series recorded at 24 or 30 frames per second, which is the type of material we encounter on a daily basis. It is precisely in this area that the motion smoother proves to be one of the most important features for everyday use of the television, and here the Bravia 3 performs really well.

X75WL is not the best TV for gamers. It only has the ALLM (Auto Low Latency Mode) feature and a basic Game Bar, which are not sufficient to satisfy more demanding users. In this price range, one would expect support for features such as VRR or 120 Hz refresh rates – although in FULLHD, which are already standard – unfortunately, they are lacking here. This is a big downside for Sony, as the competition offers much more for gamers in a similar budget.

Bravia 3 isn't gear for eSports enthusiasts or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports closes the topic before it even has a chance to develop. This is a TV for the casual gamer who, after work, fires up FIFA or racing games, not for someone who measures every frame in a spreadsheet. Nonetheless, Sony has added a few nice extras to ensure it’s not too bare. ALLM works as it should, automatically switching the TV to game mode (low latency). We even find a simple Game Bar here, which is clear and straightforward. However, the biggest curiosity is the PlayStation Portal app. Thanks to it, you can launch games from your PS5 wirelessly and see them on the TV screen straight away. Sounds great, but it only takes a few minutes to feel significant delays. In our opinion, it’s more of a showcase of capabilities than something that can be used on a daily basis. If someone really wants to play, it’s better to plug the console in with an HDMI cable and forget about wireless issues.