Sony X75WL vs Philips PUS8500

The luminance chart for the X75WL Sony television showed a maximum value of 350 nits, which unfortunately is not an impressive result. The television does not surprise with its brightness, and all the HDR scenes we tested lacked depth and the appropriate lighting effect that should accompany HDR content. Additionally, the tragic coverage of the DCI-P3 colour palette makes it difficult for the television to reproduce rich colours, which significantly affects the overall viewing experience of HDR content. The lack of adequate brightness and poor colour coverage means that HDR effects are very limited in this model.

When it comes to HDR performance on the PUS8560, it's safe to say that it's rather average. The brightness of the panel is around 350 nits, so we consider this to be the absolute minimum for watching content in this format. However, it’s not a result that will impress viewers looking for the best possible picture.

On the plus side, it's worth noting that the PUS8500 series – including the PUS8560/12 tested here – is marketed as a QLED television. And indeed, we can expect a wider colour gamut here. This model is equipped with an additional filter (PFS), and the DCI-P3 coverage of around 90% should suffice for most users. This filter operates very similarly to quantum dots. As a result, colours are quite well-saturated. It's not an outstanding result, but it's entirely sufficient for watching movies and series from streaming platforms.

Colour reproduction tests for the model Sony X75WL are conducted in film mode, which offers the best picture settings but also has its flaws. The biggest issue with the X75WL Sony is the white balance – for both HD and 4K HDR content – which is characterised by a dominance of blue. As a result, the entire image feels too cool. The colour checker confirms these errors, showing that colours lean towards cooler shades. Regarding brightness characteristics, the contrast gamma is at quite a decent level; however, the same cannot be said for the EOTF curve. There are significant issues with maintaining the appropriate brightness – the image is either too bright or too dim, which affects the visual perception of the content.

We tested the television on the best available factory settings, that is, in Film/Filmmaker mode – this is the mode we recommend for everyday viewing. Unfortunately, it is not without its flaws. Both in HD and HDR content, the image had a distinct tendency to pinkness, caused by an excess of red and blue in the white balance. Another issue turned out to be excessive brightness of the image, as confirmed by both the gamma graph and the EOTF curve. This characteristic was responsible for the loss of detail and washed-out colours in more challenging HDR scenes we mentioned earlier. All of this led to quite significant colour reproduction errors – in extreme cases, the delta E value exceeded 7, while the threshold for visibility of errors for the human eye is about 3. This situation can be improved through calibration, and you can read about its effects below.

X75WL Sony is one of those cases where image calibration may not be heavily spectacular, but it provides a very good improvement in colour perception. The white balance, both for HD and 4K materials, has been significantly improved – we no longer have a strong dominance of cooler shades. The gamma curve also appears more stable, which translates to better image quality. However, the biggest issue remains the EOTF curve, which is responsible for brightness in 4K materials. Due to the technological limitations of the television (IPS panel and lack of local dimming technology), it's hard to talk about significant improvement, as we can't squeeze more out of this model. Despite these limitations, the tonality of the image has been significantly improved.

The Dutch manufacturer offers quite a large dose of settings in its products, so as usual, we decided to tinker with them a bit. The effects are immediately noticeable – we managed to correct the white balance, which made the image cease to appear overly pinkish. The brightness characteristics were also partially equalised, of course within the limits that the television itself allows. The picture is no longer so excessively brightened, and the overall reception after calibration is definitely better than in the factory settings of the Filmmaker mode.

You could only nitpick about the characteristics of the EOTF curve, which still indicates that the image tends to brighten HDR content. Despite our efforts, the darkest parts of the scenes can still be too bright, and the brightest ones do not always reach their full contrast potential. However, it must be clearly stated that we are dealing with a typically budget-oriented design – one cannot expect reference-quality rendering of HDR content from it.

Calibration has definitely helped this model – it improved the balance, toned down the aggressive colour palette, and brought the image closer to what one can expect from a well-configured movie mode. However, there are certain limitations that cannot be overcome.

In the case of low-quality tonal transitions, the Sony X75WL television performs poorly. The lack of any feature to improve tonal transitions results in noticeable imperfections in colour gradation. However, it can be noted that the digital processing is quite good – the image is displayed without overscan, and the overall presentation is relatively good thanks to the added slight sharpness, which some users may appreciate.

Philips PUS8560 offers a deinterlacing function, hidden under the name “distortion reduction”. And while it indeed serves its purpose, smoothing out problematic tonal transitions, it operates a bit too broadly. In practice, it affects not just colourful gradients but also softens faces, clothing textures, and furniture surfaces. This undermines the authenticity of the image – especially in films where natural texture is of great importance. However, if someone is looking for smoothing at any cost, it’s best to set this option to “Low”. For cinema image enthusiasts – we definitely do not recommend it.

On the plus side, the quality of scaling older materials is worth noting – the PUS8560 model handles them surprisingly well. The image retains a natural softness without artificially boosted sharpness. It’s also worth mentioning that the TV correctly displays very low-resolution content, avoiding issues with image cropping (so-called overscan).

The X75WL Sony television features a 60 Hz panel, making it more suitable for watching movies than for fast-paced gaming. This model includes a motion smoother called Motionflow, which allows the user to adjust the picture on a 10-point scale. Smoothness adds intermediate frames, thus increasing motion fluidity, and the image becomes more theatrical while minimising the judder effect. Clarity reduces motion blur, which is especially useful during fast-paced scenes, such as sports or dynamic action in films. With this feature, the user can tailor the fluidity and sharpness of motion to their own preferences.

The Philips PUS8560 is a television equipped with a 60 Hz refresh rate panel, which already limits its capabilities for displaying dynamic content right from the start. Watching sports or playing on a console is not one of the more enjoyable experiences. The situation is further worsened by the absence of any option to improve film fluidity. In the menu, you won’t find settings that would allow for the activation of motion smoothing or even a slight motion blur for films recorded at 24 frames per second. You can imagine the effect. The image can appear choppy, especially in shots with panoramic camera movements.

X75WL is not the best TV for gamers. It only has the ALLM (Auto Low Latency Mode) feature and a basic Game Bar, which are not sufficient to satisfy more demanding users. In this price range, one would expect support for features such as VRR or 120 Hz refresh rates – although in FULLHD, which are already standard – unfortunately, they are lacking here. This is a big downside for Sony, as the competition offers much more for gamers in a similar budget.

Although the Philips PUS8560 is not designed with gamers in mind, the manufacturer has equipped it with a few features that may prove useful when connecting a console. Onboard, we find automatic switching to game mode (ALLM), as well as a simple connection status information bar – the so-called Game Bar. It doesn't make a particularly visual impression, but it serves its purpose. The presence of variable refresh rate (VRR), operating in the range of 48 to 60 Hz, may come as a surprise. This is not a wide range, but for less demanding games or titles with unstable frame rates, VRR can help reduce the tearing effect. However, this is the only element that can be considered beyond the minimum.

It must be clearly stated that the PUS8560 is not equipment for gamers looking for a responsive screen and full support for modern console features. It lacks HDMI 2.1 ports, the refresh rate is limited to 60 Hz, and the panel's response time is not among the fastest. This model may at best suit people who play occasionally and want to enjoy the Ambilight system.