Sony BRAVIA 7 II vs Hisense U7S / U77SE

Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode for watching, Professional, we measured about 2,000 nits of peak brightness, so the panel’s capabilities are truly large. Of course, in Mini-LED sets a test-pattern result is only part of the story, because much still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform really well. Depending on the scene, the brightness we measured in films ranged from about 1,100 to as much as 1,700 nits. That’s a level at which HDR has proper punch and bright highlights can be genuinely impressive. It’s not perfect in every situation. With small bright elements on a very dark background, the Bravia 7 II clearly prioritises maintaining good black levels, so their brightness can fall to around 500 nits. It still looks good, but it’s clear the TV doesn’t always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is where True RGB was meant to deliver one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured roughly 98% DCI-P3 coverage and 88% BT.2020, so the potential for showing highly saturated colours is substantial. In RGB TVs the matter is a bit more complex. When we repeated the same measurements with a film-like background applied, gamut coverage dropped to about 92% DCI-P3 and 78% BT.2020. Those are still good numbers, especially for an RGB Mini-LED TV, but they show that the final result largely depends on how the algorithms drive the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain strong saturation. The biggest differences are visible in blue shades, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primaries. True RGB therefore offers genuinely greater potential, but, as with brightness, a lot depends on what’s actually happening on screen.

The Hisense U7S has considerable HDR potential, but it can’t make full use of it in every scene. On a test pattern it reaches about 1100 nits, so the backlight is genuinely strong. In our brighter film scenes we measured around 640 to 745 nits. That’s still enough for the sun or bright highlights to have a distinct bloom and to show an advantage over SDR material. When the TV needs to light a larger portion of the image, it handles it quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area considerably larger than a tiny point on the screen. If the TV were to drive such a zone strongly, it would brighten the surrounding area along with the light. Hisense tries to avoid that and dims the whole zone. Blacks look better as a result, but a small bright object that should draw the eye also loses intensity. That’s why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small highlights are noticeably muted. The U7S therefore prioritises keeping deep blacks, even at the expense of bright details. With this number of zones it’s an understandable compromise, but it’s worth remembering that the peak 1100 nits tells us about the backlight’s capability, not how brightly the TV will show every element of a film.

Colours

Hisense markets the U7S as ULED, but that’s a marketing name; the wider colour gamut here is achieved by a PFS phosphor backlight. In our measurements the TV covered about 91% of the DCI-P3 space and 71% of BT.2020. Those are good results, though a little short of the best screens on the market. The biggest shortfall is in green — the TV doesn’t even reach the DCI-P3 boundary there, so the most intense green hues will be less saturated than they should be. Most colours in HDR films and series still look suitably vivid, however. A positive is the repeatability of the results: gamut coverage on test patterns and in film scenes is practically identical.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available presets. It's not perfect. In SDR the white balance is slightly biased toward magenta, so some scenes look a little warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. As a result the image is a bit too dark in places, especially in the mid-tones. In HDR the situation is better. As brightness increases there's a little too much red, but it isn't something that really jumps out while watching. Overall the Professional mode is a good starting point, though you can get a bit more out of it with calibration.

Factory colours on the Hisense U7S are decent, but there are a few things to fix. In SDR the white balance favours red, so the image looks too warm, in places with a slightly pink tint. You can see this on faces and bright, neutral surfaces. Gamma also runs below the target, so the TV brightens the image, especially in darker areas. That makes it easier to see shadow detail, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral, with midtones lacking blue and the brightest parts lacking red. A bigger problem is the way brightness is reproduced. The EOTF curve shows that a large portion of the midtones is boosted, making the image appear brighter than the source material intends. Color Checker measurements also fare worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colours can therefore look attractive, but they're not always faithful to what we should be seeing. There’s room for improvement and we’ll see how much can be corrected with calibration.

After calibration the Bravia 7 II can look significantly better. First and foremost, we managed to set the white balance very well in both SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users those changes will have the biggest impact on the picture. There is, however, a limitation with the colours themselves. On the Bravia 7 II Sony does not provide access to a traditional CMS that would let us adjust individual hues separately. Much is left to the algorithms controlling the True RGB backlight. If the TV reproduces a specific colour inaccurately, we are not always able to do anything about it. In our measurements this is most apparent in parts of the reds and blues, where errors can still be quite large. That does not, however, undermine the value of calibration. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference from the factory settings is noticeable.

Calibrating the Hisense U7S did the most for SDR content. We managed to even out the white balance, so the earlier warm tint is gone and whites and greys look neutral. Gamma now sits very close to the reference, so the TV no longer brightens the image unnecessarily and darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors are below 2. For watching regular TV and SDR films, this delivers a really well calibrated picture. Calibration in HDR wasn’t as smooth. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the film’s brightness a bit on its own. It brightens parts of the image and, depending on the scene and local dimming, can tone down the brightest elements. That couldn’t be eliminated by calibration. This also shows up in the Color Checker results, where many errors remain around 3–4 and some exceed 7. In SDR the result is therefore very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of Sony's biggest advantages over the competition. Sony has for years excelled at digital image processing, and it's clear here too. Above all, the 'Smooth Gradation' function works very well, smoothing weaker tonal transitions in poorer-quality content. The safest setting is low, but we'd comfortably recommend medium as well. The effect is stronger, and the TV still handles fine detail very delicately. Some minor details may be slightly smoothed, but Sony does it much more subtly than many other brands. Upscaling is also very good. Lower-resolution content is nicely upscaled to 4K; the image looks clean and retains a lot of detail. Of course the TV won't magically turn native HD into true 4K, but the Bravia 7 II does very well with what can be pulled from such a source.

The processing of lower-quality material in the Hisense U7S is fairly average. The Pentonic 700 chipset used here doesn't cope particularly well with the effects of heavy compression. There's a "Smooth and Gradient Picture" function in the menu, but its performance leaves a lot to be desired. At the low setting it's hard to see any improvement in tonal transitions, though at least the picture doesn't suffer. Medium and high settings still don't remove visible banding between tones and begin to blur details; in our clips parts of characters' faces even vanished. Interestingly, film grain remains untouched at every level. If you do use this function, stick to the low setting. Its current performance needs refinement, but that's mainly down to the processor used here.

Upscaling to 4K performs much better. Lower-resolution content gains clarity, edges are well reproduced and fine details look sharp. That doesn't mean the TV can recover details that weren't in the recording, but it makes good use of what's provided by the source. Another plus is the lack of edge cropping, even with an SD signal.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you'd expect from a TV of this class. With sport or games at 120 fps the picture is suitably smooth, and for films Sony provides an advanced motion interpolation system. You can therefore adjust the level of interpolation separately and choose whether to retain a more cinematic motion or achieve noticeably greater smoothness. Motion blur itself is a bit worse. The VA panel used isn't among the fastest, and moving objects can show a slight trailing, especially against darker backgrounds. It's not at a level that will seriously disturb normal viewing, but last year's Bravia 7 was better in this regard and had a noticeably faster panel.

Motion handling on the Hisense U7S is decent thanks to its 144 Hz refresh rate. For films there's also a motion smoothing option with adjustable judder and blur reduction. You can keep a more cinematic feel to motion or increase smoothness if choppy camera pans bother you. High refresh is also useful for sport and gaming, but unfortunately it doesn't solve the panel's biggest problem.

The issue is pixel response time. Fast-moving objects leave long, distinct trails, as our UFO test shows. It's worst on dark backgrounds, where the trail is particularly pronounced. So motion can be smooth, but the moving object loses sharpness, and that difference on the U7S is fairly easy to spot.

Bravia 7 II has pretty much everything you'd want from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to low-latency mode. HGiG works correctly, so once you configure HDR on the console the TV won't try to brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Another plus is Dolby Vision in game mode, which will be especially useful for Xbox owners. Sony also includes its own Game Menu, where you can quickly view key signal info, check VRR or change gaming settings without digging through the full TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz. Our biggest complaint is not really about the features but the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 with 48 Gbps bandwidth. One of those is also the eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you only have one full HDMI 2.1 left for a console or PC. With a single console that's fine, but with a PS5, an Xbox and an audio setup it starts to feel cramped. That's hard to justify from Sony. In cheaper TVs two HDMI 2.1 ports can still be accepted, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.

The Hisense U7S has plenty to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz in Full HD, 1440p and 4K, so modern consoles’ capabilities are well utilised. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a lot of choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate doesn’t eliminate. VRR and ALLM are present as well. VRR helps keep the picture tear-free when a game’s frame rate changes. ALLM automatically switches the TV into game mode, so you don’t have to go into the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision at 120 Hz. Importantly, that format does not cause significant input lag here. The Game Bar also looks great. It’s clear and attractive, and lets you quickly check what signal the TV is receiving. Handy gaming settings are close to hand too, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the whole menu.

Our biggest complaint is HGiG. Hisense keeps doing its own tone mapping, which makes setting up HDR on the console confusing. You adjust the checkerboard pattern, and the TV continually alters its appearance. As a result, the point at which the pattern disappears does not correctly indicate the display’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR brightness on the console to around 900 to 1000 nits, rather than rely on the configurator.