SONY BRAVIA 3 vs Samsung QN80H

Bravia 3 does not hide the fact that it belongs to a group of TVs that are rather modest in terms of brightness. Our measurements showed around 370 nits, which is a value balancing on the brink where any HDR effect can still be discussed. For some, this is an acceptable level, while for others it is more typical for SDR materials, where spectacular flashes or vivid contrasts are not expected. The impression is that this is not a TV for those focused on the highest image quality in demanding film content. However, this does not mean that there are no advantages to be found here. Compared to its predecessor, the X75WL, the Bravia 3 has gained an additional PFS filter, which works similarly to solutions known from QLED technology. Thanks to this, the DCI-P3 color gamut has been significantly expanded, reaching over 91 percent, which in practice results in more saturated colours and a more pleasing texture of the image. As a result, even everyday content looks a bit more vibrant, and films and series can surprise with their colourful presentation, despite limitations in brightness itself.

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000‑nit mark, which on paper already promises a solid HDR effect. In practice the screen really shows its stuff, although it can't always fully spread its wings (or its backlight 🤔). The best impression comes from bright, wide shots. Sunlit landscapes or heavily lit scenes look really good on it. Brightness then sits around 700 nits, which delivers a noticeable step up compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim those aggressively to protect black depth at all costs. On one hand you get better contrast, on the other... you lose dynamics and the sparkle of fine HDR detail. The TV therefore has plenty of potential, but the local‑dimming algorithm can be too restrictive.

Colour‑gamut coverage

Colour-wise it’s also good. The QN80H uses quantum‑dot technology, and in our measurements it covered 93% of the DCI‑P3 colour space and about 70% of BT.2020. Those results won't drop anyone's jaw today, but in real‑world use they’re more than enough to deliver a vivid and natural picture for most films and series. Colours are suitably saturated and, after proper tuning, they don't look artificial or overly aggressive.

We primarily tested the Sony Bravia 3 in movie mode, which immediately turned out to be the best choice among the factory settings. It's not a perfect picture, but compared to the eco mode that the TV suggests straight out of the box, the difference is evident and definitely better. In movie mode, there is a noticeable issue: the picture seems too warm, which is due to the lack of blue colour in the white balance. Nevertheless, in SDR content, the final effect can still be considered quite decent and satisfactory for everyday viewing. Much more serious errors arise in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management, combined with limited colour gamut coverage, further exposes the shortcomings of the picture in this mode. All of this makes HDR on the Bravia 3 look unconvincing and can ruin the impression left by the otherwise quite decent SDR content settings. Fortunately, it’s not a hopeless situation. Various errors can be somewhat mitigated, and some can even be completely corrected through professional calibration. That's why we decided to check how the TV would perform after such adjustments.

The QN80H’s factory settings performed really well, especially compared with most TVs that come through our tests. Of course we took measurements in Filmmaker Mode, and that’s the mode we recommend switching on right after the initial setup. For SDR content our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to spot without test equipment. The only weaker point was the gamma. In brighter parts of the picture the TV brightened them a little too much, so the image sometimes lost some depth. Even so, we wish most TVs looked this good straight out of the box.

It was a bit worse in HDR. The white balance was still set correctly, so the issue wasn’t colour but the way the QN80H managed image brightness. You could see that straight away on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, very small highlights were often dimmed too much at the same time. As a result some fine details simply disappeared. The factory Filmmaker mode in HDR isn’t bad, but it’s definitely not as well tuned as it is in SDR.

Calibration allowed us to extract significantly more from ChooseTV 3 than we could have expected at the beginning. First and foremost, it managed to address the deficiency of blue, which previously caused a noticeable warming of the image. After a slight adjustment in white balance, most errors in the Color Checker measurements for SDR content practically disappeared. The whites took on a natural tone, and brightness management in gamma stabilised to an almost ideal level, not exceeding the threshold of what the human eye can perceive. So it is safe to say that in SDR content, after a few adjustments in the settings, ChooseTV 3 performs really well. It fares much worse, although still definitely better than before calibration, when it comes to HDR content. The white balance has been brought in line, but the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which is immediately noticeable. Colour-wise, the effect has also improved, although it is far from perfect – many errors still exceed the threshold of four, and even five delta E units, remaining visible to the human eye. It was already clear earlier that ChooseTV 3 is not a television designed to impress with HDR quality. Nevertheless, it is pleasing that in SDR content, after calibration, the picture can look really great and in this category, the television pleasantly surprised us.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we were able to rein in how the QN80H handled brightness; it had been making most scenes too bright. After calibration the picture is calmer, more natural and much closer to a faithful reproduction.

Bravia 3 brings something more to the Sony television family than just a shared name. It stands out primarily for its ability to enhance the quality of weaker materials thanks to the processor used. Of course, we won’t find the advanced XR chip known from more expensive models here, but nonetheless, it must be said that the image in lower resolution looked surprisingly good. The scaling worked effectively, and most areas of the screen were free from the typical excessive edge roughness found in budget constructions.

Also worthy of attention is the function that improves the smoothness of tonal transitions. In high setting, it works really well, effectively masking gradation imperfections without significant loss of detail. It does happen that the algorithm overzealously smooths elements that should remain sharp – for example, faces – however, in the overall assessment, the effect is beneficial. The best results were achieved precisely at the highest setting, and this is the option we could recommend to those watching lower-quality content.

The digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we've already seen in previous Samsung models and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without making it feel like the TV is trying to forcibly enhance the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, especially in low-bitrate streaming. However, you should remember it doesn't work without side effects. It can remove some film grain and slightly smooth the picture. So with a good-quality source we'd leave this feature turned off. If, however, banding and uneven tonal transitions bother you more than the loss of some grain, "Noise Reduction" can be a really useful addition.

Motion smoothness has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has included something that may appeal to those more sensitive to the way images are displayed. I'm talking about the proprietary motion smoother, Motion Flow, which gives the user plenty of adjustment options. With it, one can make the image smoother, almost theatrical, or stick to a more cinematic style with characteristic judder that many people simply associate with a filmic atmosphere. These functions work with content at lower frame rates, such as films and series recorded at 24 or 30 frames per second, which is the material we deal with on a daily basis. This is precisely where the motion smoother proves to be one of the most important features in everyday TV usage, and here, the Bravia 3 performs really decently.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes the image at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach up to 240 Hz. That's new for Samsung TVs and a handy extra for people who want to use the TV for PC gaming. We were more interested, though, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. It does very well. The panel doesn't suffer much from the smearing typical of VA panels; faint trails behind moving objects are mostly visible on dark backgrounds. That's not something that would interfere with normal sports watching or gaming. The TV also has a motion smoothing system that Samsung calls "Picture Clarity". You can set judder reduction and blur reduction separately, so it's easy to tune it for films, sport or your own preferences.

Bravia 3 is not gear for e-sports enthusiasts or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports shuts down the conversation before it even gets started. This is a TV for casual gamers who, after work, will fire up FIFA or racing games, not for someone who measures every frame in a spreadsheet. Nonetheless, Sony has thrown in a few nice additions so it’s not completely sparse. ALLM works as it should, automatically switching the TV to game mode (low latency). We even find a simple Game Bar here, which is clear and intuitive. However, the biggest curiosity here is the PlayStation Portal app. Thanks to this, you can launch PS5 games wirelessly and see them right on the TV screen. It sounds great, but it only takes a few minutes to feel significant lag. In our opinion, it's more of a showcase of capabilities than something that can be used day-to-day. If someone really wants to game, it's better to plug the console in with an HDMI cable and forget about wireless issues.

The Samsung QN80H is a TV that performs very strongly when it comes to gamer-focused features. The biggest new feature for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still investing heavily in the gaming side of its TVs. The list of advantages doesn't end there. The QN80H has four full HDMI 2.1 ports, which at this price point still isn't standard. So you can connect multiple consoles, a PC or a soundbar at once and not worry about which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which could matter especially for Xbox Series X owners. However, this isn't a flaw that rules the QN80H out as a gaming TV. Samsung does have a feature that most manufacturers still lack, namely its proprietary motion smoothing, Game Motion Plus. This motion smoother also works in game mode, improving the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby's codec, especially in more demanding games that don't offer a 60 fps mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped gaming TVs in its class.