Sharp GP7 vs SONY BRAVIA 3 II (XR35M2)

In terms of HDR, Sharp GP7 can surprise us pleasantly. The maximum brightness of around 500 nits is the threshold at which the real advantages of high dynamic range begin to be visible. During our tests, we achieved stable values between 430 and 500 nits, which translated to a clearer distinction of elements in both bright and slightly darker scenes. Additionally, it has a DCI-P3 colour gamut coverage of about 95%, allowing for vibrant, visually pleasing colours. Of course, it isn't top-tier, but for this price range – a big plus.

The Bravia 3 II isn't exactly a TV that tries to impress with brightness. In our measurements it reached around 450 nits, so it's well short of the brightest models on the market. That doesn't mean HDR is just a paper feature here. Compared with standard SDR material, the brightest parts of the image can already punch through noticeably, and highlights, light sources and stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where the screen contains lots of bright elements. Then the Bravia 3 II can give a taste of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of bold, spectacular HDR we’re left with a merely competent picture.

Colours

The Bravia 3 II uses a QLED panel, although technically it doesn't employ a traditional quantum-dot layer. Instead Sony has used a PFS phosphor-based solution, which performs a very similar role: it allows for more saturated reds and greens, and thus reproduces a much wider colour gamut. In our measurements coverage of the DCI-P3 gamut was about 94%, and of the very wide BT.2020 around 74.4%. Those are good results for this class of hardware, which means the Bravia 3 II has no problem showing suitably saturated colours in HDR material. Colours don't look washed out, and the more intense hues can look really attractive.

Out of the box, in movie mode, GP7 doesn't fare badly at all. In HD materials, we noticed slight disturbances in white balance - drops in red and blue that made the image take on a somewhat greenish hue. This is noticeable, for instance, on the faces of characters, which become less lifelike. The gamma is slightly brighter in places, resulting in less deep blacks. In 4K HDR content, a cooler, bluish tone also emerges, making the colours appear less natural. On the other hand, looking at it from a "straight out of the box" perspective, these settings aren't bad - a few minor adjustments will suffice, and with the help of special tools, we will try to improve them.

In Professional mode the Bravia 3 II delivers a fairly good level of colour reproduction straight out of the box. In SDR the most noticeable issue is a slightly low gamma, which makes the midtones a little brighter. The white balance isn't perfect either; as brightness increases a bit of blue and red drops away, so whites can sometimes appear a touch warmer with a faint greenish tint. These aren't mistakes that immediately jump out when watching a film. Average error values hover around 3, so the factory setup can be considered quite good. The situation in HDR is similar. Here too there's a slight lack of blue, so the picture is marginally warmer than the reference, but the difference isn't large enough to be distracting during normal viewing.

Calibration really makes a difference in Sharp GP7. After making adjustments, we achieved a better white balance in HD content, and the colours started to look much more natural, with minimal deviations and no clear dominance of individual hues. In 4K HDR, the change isn't as spectacular, but it's still noticeable. The gamma has been brought to a more neutral level, although a slight boost in the brightest details on the screen is still evident. The inability to control dynamic tone mapping limits our manoeuvrability, but nonetheless, this is a significant step forward compared to the factory settings.

After calibration you can get a lot out of SDR material. The white balance was set almost perfectly, gamma practically matches the reference value, and average colour errors fell from around 3 to about 1. That’s already the level at which differences from the reference image are very hard to spot in practice. The Bravia 3 II therefore shows that despite its place in Sony’s range it has quite a bit of potential for precise picture tuning. Improvement is also visible in HDR, although here you can’t avoid all the limitations of the TV itself. Once the colours are evened out it’s easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II gently darkens parts of the image. That isn’t ideal from a reference point of view, but in this particular TV it also has an advantage. With no local dimming and average black levels this behaviour slightly reduces the visibility of the backlight in darker scenes and helps preserve a stronger sense of contrast. You could say Sony is partly masking the limitations of the panel this way, rather than trying at all costs to stick to the reference brightness.

The TV can scale lower quality content quite well. Our test patterns were well reproduced, and although there was minimal banding with fine, delicate shapes (such as thin branches), it still looked satisfactory. Additionally, Sharp GP7 offers a “10-bit colour reproduction” feature to smooth tonal transitions in poor quality materials. It is useful, but at the cost of some details, so we recommend turning it on only when we're really watching something of poor quality.

Bravia 3 II is Sony's first TV to use the new MediaTek Pentonic 800 chip, and you can see a few changes in the image processing. Starting with the basics: the upscaling itself is decent. The TV can sensibly upscale lower-resolution material and doesn't have a strong tendency to over‑emphasise jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming material the picture therefore remains quite attractive.

We have more reservations about the digital image processing. In this model Sony has replaced the well-known "Smooth Gradation" function with a new setting called "Digital Noise Reduction". Its job is basically the same: to smooth out ugly tonal transitions and artifacts caused by heavy compression. Unfortunately, this function performs noticeably worse than before. At the "Large" setting (the only one that had any visible effect) the TV can smooth away too many image elements at once, which causes film grain to disappear and object textures or even skin to start looking unnatural. Worse still, the effect is not particularly stable. When there's more motion in a scene, the function's effect noticeably weakens and at times it looks as if the TV stops intervening in the image altogether. So for everyday viewing we wouldn't recommend using it at a high level. It can help on static shots, but the trade-off is often too much loss of detail.

With a 60 Hz panel and average response time, it's hard to expect miraculous smoothness. In dynamic tests, like the one with the “little green man”, it’s clear that the picture can blur and occasionally lose sharpness. For watching movies and series, this is acceptable, especially since you can use the motion smoother with three levels of adjustment. However, if we care about ultra-smooth sports broadcasts or super-responsive gameplay, we might feel a bit dissatisfied.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Sony has, however, managed that issue very well here. Fast-moving objects remain sharp, and the characteristic motion trails and blur are reduced to a very low level, if not to zero. It's one of the least motion-blur-prone LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series, the Bravia 9 II.

Let's not kid ourselves – GP7 Sharp is not a television for the most demanding console gamers. Yes, we have ALLM, which automatically switches the TV to low latency mode, but it lacks VRR or G-Sync. We also won't find any advanced menu to help adjust settings during gameplay. Dolby Vision in games? It's there, but with such a large input lag that it's hard to talk about comfort. If we play occasionally and don't aim for the highest standards, it can be managed, but tech enthusiasts will face disappointment.

The Sony Bravia 3 II is a very good TV for gamers, although not everything has been solved the way we’d like. The biggest change concerns the connectors. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the problems that has hung over this manufacturer’s TVs for years. You can connect several devices at once and on each input use the device’s full capabilities, including VRR and ALLM. There’s also a simple Game Bar that lets you check the key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. That won’t be an issue for everyone, but people using that resolution on a console or PC—for example to get higher frame rates in certain games—will have to choose 1080p. We have more reservations about HGiG support. Sony doesn’t let you disable tone mapping on the Bravia 3 II, so the TV keeps processing HDR even when you’d prefer to leave that task to the console. It’s easiest to spot during HDR setup—the checkerboard test pattern doesn’t disappear at the point where it should based on the TV’s actual capabilities. That doesn’t mean HDR in games will look bad. You just need to set up a little differently and, rather than relying on the pattern, manually set the peak brightness to about 450 nits. So the issue can be worked around, but you should know about it before you start configuring your console.