Samsung U8000F (VA) vs Philips PUS7000

While the U8000F with its VA panel can still be praised for decent blacks, there are no such accolades when it comes to brightness—particularly in HDR scenes. The television only achieves a maximum of just under 250 nits, which is simply too low to talk about any impressive light effects. Bright elements appear washed out, and scenes that should shine look rather flat. An interesting situation occurred during our testing of a scene from the movie Sicario 2— the screen noticeably darkened, as if the television was trying to hide its limitations in displaying blacks. One might get the impression that the device artificially darkens the image to improve contrast, but in practice, the effect doesn't make much difference, apart from the fact that we see less on the screen. Additionally, there’s the issue of colours—the U8000F doesn’t support a wide colour gamut, so one shouldn’t expect vibrant, saturated hues known from better models. The HDR image here resembles a slightly brightened SDR and... maybe that’s not such a bad thing. For this model, it’s not worth expecting a cinematic experience—better to treat HDR as a modest addition.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is insufficient to display this format correctly. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it’s better to stick with the latter format to avoid errors in displaying bright scenes, as you will read below. The situation is worsened by the fact that this is a classic LCD model without additional layers that improve colours, such as QLED or PFS. As a result, colours in HDR may seem washed out. Ultimately, this provides a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Samsung U8000F has been tested by us in the best picture mode it offers out of the box – that is, Filmmaker Mode. This profile is supposed to theoretically provide a neutral, cinematic image, free of unnecessary enhancements and artificial beautifications. In the case of SDR content – mainly in HD or SD resolution – the television already presented itself surprisingly reasonably right out of the box. The only noticeable imperfection was brightness management. The gamma chart showed some deviations – slight brightening or dimming of certain tones – but in practice, this did not significantly affect the viewing experience. For a television in this segment, it performs quite well.

However, the situation in HDR mode looks significantly weaker. Although white balance was still acceptable, colour errors were very evident. In the Color Checker test, almost every sample was outside the target point, and the image itself appeared unnatural – colours were skewed, sometimes too cool, and at other times simply dull and lifeless. The main issue lies in hardware limitations – the U8000F does not support the wide colour gamut of DCI-P3, so it is physically unable to reproduce the colours that the HDR standard intends. Unfortunately, this is evident in almost every more demanding scene.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, when we connected the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant shortcomings in displaying reds. Poorly tuned white balance and too low saturation of this colour cause the image to appear too cool. As a result, one might get the impression that the displayed content lacks vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and can make them seem slightly washed out. Fortunately, in the Philips menu, we find plenty of features to improve these aspects, so we immediately proceeded to calibration to see what we could extract from this screen.

Right out of the box, the U8000F offered a pretty decent picture in SDR for its price range. We managed to tweak it a bit further – we reduced a slight purple tint and improved the gamma characteristics, giving it a more natural curve. Despite these adjustments, the TV still has a tendency to overly brighten the brightest details – the gamma chart shows a clear break that cannot be fully corrected.

On the other hand, in HDR mode, it’s noticeably weaker. It's hard to talk about any significant improvement – despite attempts to fine-tune the settings, the picture still presents considerable colour errors. A Delta E exceeding 7 indicates noticeable deviations that we couldn’t effectively reduce. Unfortunately, this is a limitation of the construction itself – the U8000F simply wasn't designed for serious HDR. In daily SDR viewing, it performs quite well, but for HDR content... it’s best not to have overly high expectations.

After professional calibration, it’s evident that the PUS7000 responds well to image adjustments. In this price range, that’s not a given. The effects are best evaluated in two scenarios, depending on the content we plan to watch. SDR performs the best. After our adjustments, the image looks really good. Most colour errors have dropped below level 3, which is the threshold at which discrepancies usually become visible to the naked eye. Movies, series, sports, and regular television present naturally, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable straight away. However, it must be said clearly that the PUS7000 is still not a television suited for proper HDR, and calibration doesn't change much in this regard. The reason lies in the hardware: colours remain too unsaturated. The television lacks solutions that widen the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most evident in reds, which still look washed out. This limitation cannot be circumvented through menu settings, as it stems from the design of the backlighting and the panel itself.

When it comes to how the Samsung U8000F handles lower-quality materials, we have to admit that Samsung has made progress compared to its predecessor from last year – the DU7192 model, which theoretically occupies the same place in the lineup. This year’s model is equipped with a feature that improves the smoothness of tonal transitions, which has been implemented much better than last year. Yes, the television still uses quite strong algorithms that can distort details or remove film grain, but still – it can be confidently said that it works effectively. However, not everything has gone perfectly. The U8000F has noticeable issues with slight image stuttering when watching very old content in very low resolution. If someone plans to play their old VHS tape, they must be prepared for the image to look slightly “choppy”.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths unwanted tonal transitions even at a low setting. However, it has its downside: with too aggressive operation, it can introduce undesirable artifacts on the screen. It would be a good idea to experiment with this setting to find the golden mean between a smooth image and the clarity of details.

The upscaling, or enhancing the quality of lower materials to 4K, is decent. The image after processing is very "soft," which is typical of almost all Philips TVs. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu for a more pronounced effect.

The Samsung U8000F comes with a 60 Hz panel, so right from the start, it's clear that you can't expect miracles. It's simply the standard in this class – sufficient for everyday viewing, but without any fireworks. The TV offers one motion smoothing slider – a function called "Motion Blur Reduction", which allows us to adjust the smoothness of the image in films. Higher settings provide a more "theatrical" and smoothed effect, while lower settings maintain the original character of the film with a slight 24p effect. Interestingly, there is the "LED Clear Motion" feature, or BFI mode – which inserts black frames between the frames of the image to improve motion sharpness. However, in practice, the screen flickers significantly when this is activated, and it's best to treat this as more of an experiment rather than something that genuinely improves the gaming experience.

In this regard, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually the norm, and it's hard to expect more. However, the worst part is that the television has no motion smoothing features. There are no supporting systems in place for either movies or sports. We have to come to terms with the fact that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, motion can appear choppy or unclear. We have no option to enable any smoothers that could alleviate this effect.

[UPDATE] We have updated our 2025 Samsung TV reviews following the release of firmware version 1131, which officially restores the essential HGiG (HDR Gaming Interest Group) support.

Samsung U8000F offers a basic set of features for gamers, which can still prove sufficient for less demanding users. Here we have an automatic gaming mode – when a game is launched on the console, the TV switches to low-latency mode by itself, significantly improving response time. We also find the VRR feature, or variable refresh rate, which operates in the range of 48 to 60 Hz. This means that both Xbox and PS5 will not produce the 'tearing' effect on the screen – as long as we stay within this range.

Unfortunately, that's about it when it comes to advantages. Add-ons like Game Bar or higher refresh rates are reserved for higher models of Samsung from the 2025 line. In theory, the TV also supports the HGiG feature, which should adjust the HDR image to the intentions of game developers. Unfortunately – despite this feature appearing in advertising brochures and store materials – its setup on the Xbox console turned out, in practice, to be... impossible.

Even though the PUS7000 isn’t marketed as a gaming TV, it doesn't perform as poorly in this category as one might expect. True, it doesn't support 120 Hz refresh rates, which is understandable at this price point, but the manufacturer has included several important features that significantly improve the console gaming experience. The most important of these are VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This means the image doesn't "tear" and remains consistent even during sudden drops in frame rates while playing. On the other hand, ALLM is a solution that automatically switches the TV to a mode with the lowest latency immediately after detecting a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick view of current settings and connection status without interrupting gameplay, which is a very convenient solution.