Samsung The Frame Pro vs Samsung S90H (WOLED)

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a decent result for a lifestyle model. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, the brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to local dim whole strips, does not handle them very well. It happens that small elements are overly darkened, which weakens the effect, or conversely – they become heavily brightened, but at the cost of losing black depth in that part of the image. This can be compared to light halos reminiscent of a laser beam spreading in dense fog – an effect that is visible and bright but at the same time not very natural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colours are saturated, and the reproduction of the DCI-P3 palette reaches over 92%. Generally, movies or series watched in HDR on The Frame Pro present a rich colour palette, even if contrast and the performance of the lighting algorithms can sometimes draw our attention away.

The Samsung S90H in the WOLED variant is still an exceptionally bright TV for its price bracket, although it is slightly dimmer compared with the QD-OLED version. That difference is not as pronounced as in last year’s F series, where gaps sometimes reached 500 nits. Here the parameters of both panels are very similar, with differences in peak brightness of only about 100–150 nits. In small-window measurements the S90H with the WOLED panel easily reaches close to 1,500 nits. That headroom lets it phenomenally convey the dynamics of HDR effects — blooms, light reflections and explosions have the right punch, exactly as intended by the studio creators. As with most OLED displays, when a very bright scene fills the entire screen, panel protection systems kick in and brightness naturally falls to around 700 nits. It’s worth stressing that this is still an excellent result on the market, often noticeably better than many Mini LED screens in the same segment.

Colour gamut coverage

The biggest difference between the two S90H variants lies in colour reproduction and saturation. This stems directly from the different construction of the WOLED panel, which uses an additional white subpixel. As a result, very high-brightness colours don’t achieve quite the same saturation, and the wide-colour volume is slightly more limited than with QD-OLED. That said, in everyday use these differences will be hard for most viewers to notice. Our measured DCI-P3 coverage on the WOLED panel reaches almost 99%, meaning that for the vast majority of real film scenes both variants will present an almost identical image. The real gap only appears in rarer, especially demanding productions that use the ultra-wide BT.2020 gamut. Because of the WOLED panel’s construction, coverage of that standard is roughly 15% lower compared with the S90HAT with a QD-OLED panel, so the brightest, heavily lit HDR colours may appear a touch less vivid.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the most commonly viewed materials – The Frame Pro performed really well. The white balance and gamma were almost perfectly set, making the image look natural and cohesive. Yes, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed up" character, but in everyday use, it didn't hinder the viewing experience too much. For HDR content, the situation was similar regarding the white balance. It was at a good level, however, the biggest issue turned out to be managing brightness. The EOTF curve was set in such a way that in many scenes the image appeared blown out, and the brightest areas lost detail and resulted in uniform patches of light. This severely affected realism and made colours appear very oversharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their TVs, so we opted for calibration and its results can be seen below.

In Filmmaker mode, which we strongly recommend switching on straight out of the box, the S90H offers very good factory colour tuning. Colours are natural and faithful to the creators' intent, without the annoying oversaturation seen in more aggressive profiles. However, as is often the case without full calibration, there is unit-to-unit variation. In our test the white balance was a little deficient in the blue component, so the image leaned slightly towards warmer, yellowish tones. This was most noticeable in bright scenes, such as the snowy sequences from Star Wars. Additionally, the gamma curve was slightly low at around 2.2, which caused a small lift in shadow detail. In HDR mode the tuning was a bit better, showing only a slight undersaturation in the red region.

After calibration, the SDR mode looks almost perfect. We managed to eliminate the overly intense red saturation that previously gave the image a somewhat excessively warm character. The colours became more balanced, which translated into a natural and pleasant viewing experience for everyday content – from television to movies and series from streaming services or materials on YouTube. In HDR mode, the EOTF curve required the most work, as the factory settings caused excessive clipping of the entire image. The calibration significantly helped to "tame" this issue – the image stopped being overexposed, and details in the bright areas became more visible. Of course, the limits are set by the design of the television itself, as edge lighting reveals its limitations, and even the smallest elements of light can still appear overly bright or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is much more enjoyable to watch, and it is definitely worth considering if you want to make the most of the television's capabilities.

After full calibration, you can safely say the S90H in the WOLED version looks almost perfect. In SDR mode colour errors fall to ultra-low levels and Delta E values very rarely exceed 2. That's a phenomenal result, so if perfectly faithful colour reproduction matters to you, it's definitely worth getting it calibrated. The calibrated HDR mode also performs very well, where the white balance was stabilised and previous deviations eliminated. After professional tuning it's really hard to fault anything, because the TV delivers an image with almost exemplary naturalness and three-dimensionality. The slightly lower score in this category compared with the QD-OLED variant is solely due to the saturation limitation in extremely bright scenes, while the tuning potential and colour fidelity are at the highest level.

Although in 4K HDR materials the fluidity of tonal transitions in the ChooseTV Pro is not a problem at all, naturally with weaker signal quality – such as with television, HD materials, or older Full HD films – imperfections may occur. Therefore, it's crucial how the television handles these limitations thanks to the image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a visible yet not overdone way. However, it's important to remember that Samsung has a tendency to be aggressive – even at the lowest level of this feature, it can "eat" film grain. So, it's wise to use it with caution and adjust the settings according to the material being watched.

The upscaling itself is of a high standard. The ChooseTV Pro effectively boosts older materials to a native 4K resolution, maintaining good sharpness and clarity. Movies and series in lower quality simply look better here. However, it's worth mentioning a minor downside – typical for many Samsung televisions. With very old sources in poor quality, you may notice some cropping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's good to know that it may occur.

When it comes to banding reduction itself, Samsung has kept the same solutions known from last year’s models. The dedicated gradient-smoothing function works quite well and can effectively mask unwanted tonal transitions, which can be useful on a WOLED panel that’s somewhat more prone to banding. However, it’s important to remember it acts aggressively. This mechanism, aside from the artefacts themselves, can remove fine film grain and subtly soften detail. Ultimately it’s a trade-off, but if you want perfectly faithful image reproduction, it’s safer to leave this option off.

There’s also no breakthrough in scaling. The S90H uses the same NQ4 Gen3 processor as its predecessor, so upscaling quality was almost identical. The chip sharpens lower-resolution material very well, pulling a satisfying level of detail out of it. However, Samsung still hasn’t solved the old overscan problem. For some older recordings or archival footage the edges of the image can be slightly cropped. It’s a minor drawback, but it’s a shame the manufacturer still hasn’t fixed it.

The fluidity of movement in The Frame Pro is not only due to the panel itself, which operates at a refresh rate of up to 144 Hz, but also the image processor and motion smoothing system. It is thanks to this that we can adjust the way movies or sports broadcasts are displayed to our own preferences. Available are sliders for blur reduction and motion judder reduction – the first function enhances the sharpness of fast movements, while the second helps to soften the effect of the "jumping" image during camera pans. Everyone can choose between a cinematic character of motion and a smoother, more "television" style.

When it comes to motion handling the S90H is simply excellent. This year's panel offers its refresh rate boosted to 165 Hz, although in practice the benefit will mainly be for gamers connecting a powerful PC. For movies, TV series or sports broadcasts such a high refresh rate makes no difference and the picture looks exactly the same as at the standard 120 Hz. Regardless of the source, the OLED panel's lightning-fast response time does the job. Motion is clean, and the ghosting or smearing seen on LCDs simply doesn't occur here.

Samsung The Frame Pro doesn’t pretend to be just a “living room” TV; gamers will also find something for themselves here. The manufacturer has ensured a full package of gaming features: we have support for variable refresh rate (VRR), auto low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on-the-fly – from refresh rates to active image processing modes. Are there downsides? Yes, The Frame Pro doesn’t support Dolby Vision in game mode, but it’s hard to consider this a serious issue – most gamers use HDR10 anyway... so the HGIG mode. Exactly. The biggest surprise was the latest software update. Samsung... completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user cannot enable settings designed with consoles in mind. This is a step backwards, which may disappoint more aware gamers hoping for full compliance with HGiG guidelines. We can only hope that this mistake will be quickly fixed.

An interesting feature of The Frame Pro is also the unusual placement of HDMI 2.1 ports. We have as many as five at our disposal – four are located in the One Connect module, and the fifth, in micro HDMI form, is located directly on the TV. This solution is quite unusual but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimises any potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond counts. We have written separately about input lag, but we can reveal here that by connecting the equipment directly to the TV, we get the absolute maximum response speed from it.

Gamers should feel right at home with the S90H, because Samsung has left few reasons to complain in this area. The TV has four HDMI 2.1 ports, each supporting VRR, ALLM and high refresh rates. There's also the Game Bar, a handy menu that lets you quickly check key parameters and change settings without leaving the game. Importantly, Samsung has also improved HGiG. In last year's models it could cause issues when used with a console, but on the S90H it now works as it should. What really stands out against the competition is Game Motion Plus. It's a specialised motion-smoothing mode for games that works best with titles running at 30 or 60 frames per second. Motion becomes noticeably smoother and latency remains at a reasonable level. In our measurements it was under 50 ms, so gaming is still comfortable. That's important, because on many TVs enabling a similar smoothing feature causes such a big increase in input lag that controls become noticeably sluggish. Samsung has managed to find a good compromise here. There's still no Dolby Vision Gaming, but in practice Game Motion Plus may prove to be the more useful feature.