Samsung The Frame Pro vs Samsung QN90F / QN92F

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a decent result for a lifestyle model. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, the brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to local dim whole strips, does not handle them very well. It happens that small elements are overly darkened, which weakens the effect, or conversely – they become heavily brightened, but at the cost of losing black depth in that part of the image. This can be compared to light halos reminiscent of a laser beam spreading in dense fog – an effect that is visible and bright but at the same time not very natural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colours are saturated, and the reproduction of the DCI-P3 palette reaches over 92%. Generally, movies or series watched in HDR on The Frame Pro present a rich colour palette, even if contrast and the performance of the lighting algorithms can sometimes draw our attention away.

Samsung QN90F can really shine with brightness. In our measurements, it reached even over 2200 nits, which directly translates to the viewing experience. In practice, this means that when a very bright scene appears in a film – for example, a sunrise in The Meg – the screen looks as if natural light is actually shining on us. This isn't just a number from a table, but a real sense of image intensity! However, the TV can't always deliver its full power. With smaller details, such as spotlights or lamps, brightness drops to 500–700 nits. This is a deliberate decision by the algorithms – by doing this, the contrast between large and small elements is better controlled, and the image doesn't lose balance. Importantly, this is still a huge improvement compared to last year's QN90D, where similar details were almost invisible, shining at just 200 nits. Here, the HDR effect is much more cohesive and credible. The only downside is the colours. The coverage of the DCI-P3 spectrum has plateaued at 91%, which can be considered a rather average result in this price range.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the most commonly viewed materials – The Frame Pro performed really well. The white balance and gamma were almost perfectly set, making the image look natural and cohesive. Yes, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed up" character, but in everyday use, it didn't hinder the viewing experience too much. For HDR content, the situation was similar regarding the white balance. It was at a good level, however, the biggest issue turned out to be managing brightness. The EOTF curve was set in such a way that in many scenes the image appeared blown out, and the brightest areas lost detail and resulted in uniform patches of light. This severely affected realism and made colours appear very oversharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their TVs, so we opted for calibration and its results can be seen below.

The colour reproduction in the QN90F was tested in Filmmaker mode and, as is usually the case with Samsung TVs, this mode proves to be the best starting point straight out of the box. However, this does not mean that we are dealing with an image free of flaws. The white balance in SDR and HDR content was surprisingly good – colours didn't drift in any direction and even in its factory settings it looked solid. However, a problem arose with the gamma and EOTF curves, which determine how the TV manages brightness. Here, the QN90F significantly brightened the entire image, causing the black levels and colours to lose their intensity, and the overall effect resembled that of an applied milky filter. Fortunately, Samsung, unlike many competitors in the miniLED world, provides users with plenty of tools to control settings that we won't find in other manufacturers, such as Chinese brands. Therefore, we decided to see if we could squeeze the full potential out of the QN90F because we know that such a high series is capable of much more.

After calibration, the SDR mode looks almost perfect. We managed to eliminate the overly intense red saturation that previously gave the image a somewhat excessively warm character. The colours became more balanced, which translated into a natural and pleasant viewing experience for everyday content – from television to movies and series from streaming services or materials on YouTube. In HDR mode, the EOTF curve required the most work, as the factory settings caused excessive clipping of the entire image. The calibration significantly helped to "tame" this issue – the image stopped being overexposed, and details in the bright areas became more visible. Of course, the limits are set by the design of the television itself, as edge lighting reveals its limitations, and even the smallest elements of light can still appear overly bright or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is much more enjoyable to watch, and it is definitely worth considering if you want to make the most of the television's capabilities.

After our adjustment of the settings, the QN90F showed what it’s really capable of – and we have to admit, it’s one of the best images we’ve seen on a miniLED screen this year. As we mentioned earlier, the white balance wasn’t a big issue even in the factory settings, but it was only after gamma calibration that we were able to get close to reference values. The same goes for HDR content, where the EOTF curve post-adjustment presents mature and consistent results. Indeed, in some films, you can notice that the smallest elements of the image are slightly brightened, and with a limited number of local dimming zones, there's still a risk of halo effect. However, it’s important to remember that such phenomena are characteristic of all miniLED TVs and it’s difficult to expect miracles even from the QN90F. The most important thing is that after calibration, the television displays an image that confidently competes with many OLED screens available on the market in terms of expressing the director's vision.

Although in 4K HDR materials the fluidity of tonal transitions in the ChooseTV Pro is not a problem at all, naturally with weaker signal quality – such as with television, HD materials, or older Full HD films – imperfections may occur. Therefore, it's crucial how the television handles these limitations thanks to the image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a visible yet not overdone way. However, it's important to remember that Samsung has a tendency to be aggressive – even at the lowest level of this feature, it can "eat" film grain. So, it's wise to use it with caution and adjust the settings according to the material being watched.

The upscaling itself is of a high standard. The ChooseTV Pro effectively boosts older materials to a native 4K resolution, maintaining good sharpness and clarity. Movies and series in lower quality simply look better here. However, it's worth mentioning a minor downside – typical for many Samsung televisions. With very old sources in poor quality, you may notice some cropping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's good to know that it may occur.

QN90F handles upscaling very well. Materials in lower resolutions, even SD, are enhanced to a clear and sharp image, where a lot of background detail can be seen. This is a big advantage, as the TV makes older content or everyday television look significantly better than on most budget screens. However, the issue of overscan remains, which is the cropping of the screen edges that cannot be turned off on Samsungs. This can cause some subtitles on the screen to disappear or Auntie's face from the wedding on a VHS tape to be slightly cropped. 😉

The digital image processing also performs well. In the menu, we find a feature called "noise reduction," which can smooth tonal transitions and improve the viewing of lower quality materials, such as those from YouTube. In the medium setting, the effect is most beneficial – it doesn't heavily interfere with details while simultaneously eliminating the problem of "banding" in colours. However, it's worth noting that the feature can be quite aggressive and removes natural film grain in older movies, so it's best to use it sparingly.

The fluidity of movement in The Frame Pro is not only due to the panel itself, which operates at a refresh rate of up to 144 Hz, but also the image processor and motion smoothing system. It is thanks to this that we can adjust the way movies or sports broadcasts are displayed to our own preferences. Available are sliders for blur reduction and motion judder reduction – the first function enhances the sharpness of fast movements, while the second helps to soften the effect of the "jumping" image during camera pans. Everyone can choose between a cinematic character of motion and a smoother, more "television" style.

QN90F has been equipped with a panel that has a maximum refresh rate of 165 Hz, and while this advantage will mainly be appreciated by PC gamers, it’s still worth highlighting. In movies or sports broadcasts, we are limited to the classic 120 Hz, but this is not a cause for concern. In practice, the additional motion smoother is more significant here. Thanks to the "Motion Clarity" setting, we can adjust the picture to our own preferences. The blur reduction option is responsible for fluidity and ghosting in sports. Meanwhile, the "judder reduction" function improves motion fluidity in productions recorded at 24 frames, namely films and series. If we set it high, the film looks smoother and more fluid than it was actually shot. Lower values, on the other hand, preserve its cinematic "rawness" with the visible film frame.

Samsung The Frame Pro doesn’t pretend to be just a “living room” TV; gamers will also find something for themselves here. The manufacturer has ensured a full package of gaming features: we have support for variable refresh rate (VRR), auto low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on-the-fly – from refresh rates to active image processing modes. Are there downsides? Yes, The Frame Pro doesn’t support Dolby Vision in game mode, but it’s hard to consider this a serious issue – most gamers use HDR10 anyway... so the HGIG mode. Exactly. The biggest surprise was the latest software update. Samsung... completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user cannot enable settings designed with consoles in mind. This is a step backwards, which may disappoint more aware gamers hoping for full compliance with HGiG guidelines. We can only hope that this mistake will be quickly fixed.

An interesting feature of The Frame Pro is also the unusual placement of HDMI 2.1 ports. We have as many as five at our disposal – four are located in the One Connect module, and the fifth, in micro HDMI form, is located directly on the TV. This solution is quite unusual but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimises any potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond counts. We have written separately about input lag, but we can reveal here that by connecting the equipment directly to the TV, we get the absolute maximum response speed from it.

QN90F has almost everything to become the perfect TV for gamers. Things like four HDMI ports, VRR, ALLM, or refresh rates reaching up to 165 Hz need no reminder. The Game Motion Plus mode deserves a big thumbs up, which is the proprietary motion smoothing technology for games. With it, you can add a few 'artificial' frames and make the image generated from the console look smoother than it should. This is a very unique solution in the world of TVs – competing systems usually do not offer this – and that's why Samsung has had a strong selling point among gamers for years, even despite the lack of support for the still niche Dolby Vision in games.

[UPDATE] We have updated our tests of Samsung TVs from the 2025 range due to the release of firmware version 1131, which restored the crucial HGiG feature for gamers.

So why do we refer to it as an 'almost' perfect screen? Unfortunately, just like in recent Samsung models, we've noticed a problem with the lack of HGiG functionality. This is a solution that allows the TV to leave control over tone mapping to the console, so that games look exactly as the creators intended. Worse still, this feature was previously present and disappeared after software updates. Instead of minor fixes, we got a step backward. It's a shame, because if it weren't for this lack, the QN90F could have been a truly ideal choice for gamers in the miniLED category.