Samsung The Frame Pro vs Panasonic W95B

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a decent result for a lifestyle model. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, the brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to local dim whole strips, does not handle them very well. It happens that small elements are overly darkened, which weakens the effect, or conversely – they become heavily brightened, but at the cost of losing black depth in that part of the image. This can be compared to light halos reminiscent of a laser beam spreading in dense fog – an effect that is visible and bright but at the same time not very natural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colours are saturated, and the reproduction of the DCI-P3 palette reaches over 92%. Generally, movies or series watched in HDR on The Frame Pro present a rich colour palette, even if contrast and the performance of the lighting algorithms can sometimes draw our attention away.

The Panasonic W95B is truly a bright screen, capable of achieving peak luminance levels of around 1400 nits. In brighter, well-lit movie scenes, this value translates into spectacular HDR effects that can leave a big impression. However, knowing our test setup, you probably see that in very demanding shots – such as the moon in the distance or the lights of a helicopter in a scene from Sicario 2 – the television doesn’t impress. In such situations, brightness drops to around 200 nits, making the HDR effect much less noticeable. This happens because Panasonic focuses on maintaining deep blacks, not illuminating the background – which shouldn’t be a concern for many users. However, it’s important to remember that in such moments, the picture starts to resemble SDR content. The coverage of the colour palette also deserves praise, as it reaches around 93% of the DCI-P3 space thanks to the use of the PFS filter (also known from QLED technology). This means that most films look very good in terms of saturation and colours, maintaining a cinematic quality to the image.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the most commonly viewed materials – The Frame Pro performed really well. The white balance and gamma were almost perfectly set, making the image look natural and cohesive. Yes, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed up" character, but in everyday use, it didn't hinder the viewing experience too much. For HDR content, the situation was similar regarding the white balance. It was at a good level, however, the biggest issue turned out to be managing brightness. The EOTF curve was set in such a way that in many scenes the image appeared blown out, and the brightest areas lost detail and resulted in uniform patches of light. This severely affected realism and made colours appear very oversharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their TVs, so we opted for calibration and its results can be seen below.

In Filmmaker mode, the Panasonic W95B offers an image with quite accurate colour reproduction, although it is not without minor imperfections. The white balance slightly leans towards red, which can cause a subtle warm tint to the image, and the gamma curve is slightly elevated, making the screen appear a bit brighter. It's good that the manufacturer has included this mode – even in its factory configuration, it provides a fairly natural look for films. However, knowing how susceptible Panasonic televisions are to calibration, we decided to check how much the image could be improved after professional tuning.

After calibration, the SDR mode looks almost perfect. We managed to eliminate the overly intense red saturation that previously gave the image a somewhat excessively warm character. The colours became more balanced, which translated into a natural and pleasant viewing experience for everyday content – from television to movies and series from streaming services or materials on YouTube. In HDR mode, the EOTF curve required the most work, as the factory settings caused excessive clipping of the entire image. The calibration significantly helped to "tame" this issue – the image stopped being overexposed, and details in the bright areas became more visible. Of course, the limits are set by the design of the television itself, as edge lighting reveals its limitations, and even the smallest elements of light can still appear overly bright or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is much more enjoyable to watch, and it is definitely worth considering if you want to make the most of the television's capabilities.

After professional calibration, the Panasonic W95B shows what it’s really capable of. Colour errors have mostly dropped below values of 2–3, making them practically invisible to the human eye. The excess red in the white balance has also been corrected, which means the image is no longer slightly tinted pink, and details in dark areas no longer get lost due to excessive dimming in the gamma. The improvement in HDR content is also noticeable – colour saturation is now more stable and doesn’t lean towards blue as distinctly as it did before. It’s truly a fantastic television for watching movies and series in the highest possible quality. While we know that Mini LED screens are not always perfectly suited for this, the W95B is a prime example that with proper tuning, a result close to OLEDs can be achieved.

Although in 4K HDR materials the fluidity of tonal transitions in the ChooseTV Pro is not a problem at all, naturally with weaker signal quality – such as with television, HD materials, or older Full HD films – imperfections may occur. Therefore, it's crucial how the television handles these limitations thanks to the image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a visible yet not overdone way. However, it's important to remember that Samsung has a tendency to be aggressive – even at the lowest level of this feature, it can "eat" film grain. So, it's wise to use it with caution and adjust the settings according to the material being watched.

The upscaling itself is of a high standard. The ChooseTV Pro effectively boosts older materials to a native 4K resolution, maintaining good sharpness and clarity. Movies and series in lower quality simply look better here. However, it's worth mentioning a minor downside – typical for many Samsung televisions. With very old sources in poor quality, you may notice some cropping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's good to know that it may occur.

In terms of image processing, the Panasonic W95B performs exceptionally well. The proprietary processor responsible for digital image processing effectively upscales lower resolution content to 4K, maintaining a high level of detail and a natural look to contours. The end result is impressive – the upscaling is truly top-notch, and Full HD content can look surprisingly good. Also noteworthy is how the TV smooths tonal transitions in low-quality materials. The algorithm doesn’t operate as aggressively as in some competing models, which helps avoid the loss of detail or the blurring of film grain.

The fluidity of movement in The Frame Pro is not only due to the panel itself, which operates at a refresh rate of up to 144 Hz, but also the image processor and motion smoothing system. It is thanks to this that we can adjust the way movies or sports broadcasts are displayed to our own preferences. Available are sliders for blur reduction and motion judder reduction – the first function enhances the sharpness of fast movements, while the second helps to soften the effect of the "jumping" image during camera pans. Everyone can choose between a cinematic character of motion and a smoother, more "television" style.

The 144 Hz panel used in the Panasonic W95B offers excellent smoothness, although in practice, given how television content looks or how new-generation consoles are limited, it’s worth looking at its performance when refreshing at 120 Hz. In this mode, the television performs exceptionally well – despite being a VA panel, which is not known for the fastest pixel response times, motion blur is minimal and difficult to detect with the naked eye.

Samsung The Frame Pro doesn’t pretend to be just a “living room” TV; gamers will also find something for themselves here. The manufacturer has ensured a full package of gaming features: we have support for variable refresh rate (VRR), auto low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on-the-fly – from refresh rates to active image processing modes. Are there downsides? Yes, The Frame Pro doesn’t support Dolby Vision in game mode, but it’s hard to consider this a serious issue – most gamers use HDR10 anyway... so the HGIG mode. Exactly. The biggest surprise was the latest software update. Samsung... completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user cannot enable settings designed with consoles in mind. This is a step backwards, which may disappoint more aware gamers hoping for full compliance with HGiG guidelines. We can only hope that this mistake will be quickly fixed.

An interesting feature of The Frame Pro is also the unusual placement of HDMI 2.1 ports. We have as many as five at our disposal – four are located in the One Connect module, and the fifth, in micro HDMI form, is located directly on the TV. This solution is quite unusual but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimises any potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond counts. We have written separately about input lag, but we can reveal here that by connecting the equipment directly to the TV, we get the absolute maximum response speed from it.

Aside from the previously mentioned issue related to VRR mode, where local dimming does not work, the Panasonic W95B is a true gaming beast. The TV offers practically everything that gamers could expect – perhaps apart from four HDMI 2.1 ports, as there are only two available. On board, we find automatic low latency mode (ALLM), correctly implemented HDR modes for gamers, including HGiG, as well as support for Dolby Vision in games. The whole package is complemented by an interestingly designed Game Bar, presented in the form of circles. It may not be the most visually attractive, but it fulfills its purpose – allowing quick access to key game parameters and adjusting settings without diving into the system menu.