Samsung The Frame Pro vs LG OLED C6 (WOLED)

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a decent result for a lifestyle model. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, the brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to local dim whole strips, does not handle them very well. It happens that small elements are overly darkened, which weakens the effect, or conversely – they become heavily brightened, but at the cost of losing black depth in that part of the image. This can be compared to light halos reminiscent of a laser beam spreading in dense fog – an effect that is visible and bright but at the same time not very natural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colours are saturated, and the reproduction of the DCI-P3 palette reaches over 92%. Generally, movies or series watched in HDR on The Frame Pro present a rich colour palette, even if contrast and the performance of the lighting algorithms can sometimes draw our attention away.

The HDR performance of the LG C6 is really very good. LG Display’s new WOLED panel has mainly brought a significant increase in brightness. In our unit we measured around 1500 nits and, importantly, the TV can show similar values in many normal movie scenes as well. That gives HDR real punch. Bright highlights, lamps and sunlight can be genuinely intense, and most HDR movies simply look very impressive. Of course it’s still an OLED, so brightness falls in scenes with a lot of white. The fifth scene from the movie The Meg illustrates this well, where the C6 reached around 600 to 700 nits. That’s still a very good result, but it also shows the new panel hasn’t shed all the limitations typical of OLEDs.

Colours

When it comes to colours, it’s also hard to raise major objections. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice colours are very saturated and, importantly, stable regardless of the scene. That’s worth emphasising, because not every TV behaves the same in this respect. In some RGB Mini LED models colour saturation can depend more strongly on image brightness. A wider colour gamut today is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to produce suitably saturated colours in most movie scenes.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the most commonly viewed materials – The Frame Pro performed really well. The white balance and gamma were almost perfectly set, making the image look natural and cohesive. Yes, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed up" character, but in everyday use, it didn't hinder the viewing experience too much. For HDR content, the situation was similar regarding the white balance. It was at a good level, however, the biggest issue turned out to be managing brightness. The EOTF curve was set in such a way that in many scenes the image appeared blown out, and the brightest areas lost detail and resulted in uniform patches of light. This severely affected realism and made colours appear very oversharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their TVs, so we opted for calibration and its results can be seen below.

Right out of the box the LG C6 is quite well set up, especially if you choose the Filmmaker mode. In SDR material the white balance is decent, although as brightness increases there is a slight lack of red. The image becomes a bit cooler, but not enough for it to be very noticeable during normal viewing. More is happening in the brightness characteristic. Gamma is a little low and instead of holding at 2.4, for a large part of the range it sits closer to 2.1–2.2. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a darkened room.

In HDR the situation is a bit more interesting. The start of the greyscale looks very good, but from about 20–30% brightness the white balance starts to drift increasingly. As brightness rises there is more red and a noticeable lack of blue. In the brightest sections the difference is already significant and also affects the reproduction of some colours. The EOTF curve itself is followed quite well through most of the range. The C6 only tends to slightly brighten the image, which we also saw in our film comparisons. The largest deviation appears around the brightest parts, where the TV starts adapting the signal to the panel's capabilities.

The factory Filmmaker setting in HDR is therefore not perfect, but overall performs well. The biggest area for improvement is the white balance, especially at high brightness.

After calibration, the SDR mode looks almost perfect. We managed to eliminate the overly intense red saturation that previously gave the image a somewhat excessively warm character. The colours became more balanced, which translated into a natural and pleasant viewing experience for everyday content – from television to movies and series from streaming services or materials on YouTube. In HDR mode, the EOTF curve required the most work, as the factory settings caused excessive clipping of the entire image. The calibration significantly helped to "tame" this issue – the image stopped being overexposed, and details in the bright areas became more visible. Of course, the limits are set by the design of the television itself, as edge lighting reveals its limitations, and even the smallest elements of light can still appear overly bright or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is much more enjoyable to watch, and it is definitely worth considering if you want to make the most of the television's capabilities.

LG TVs have long responded very well to calibration, and the C6 is no exception. After adjustments we managed to set the white balance practically perfectly, and most colour errors fell below 3, often down to around 2. In practice this means very accurate colour reproduction in both SDR and HDR. An interesting detail only appeared with the HDR brightness response. On a classic EOTF chart everything looks almost perfect and at first glance it would be hard to find fault. Only when we measured the TV’s behaviour using filters based on real film scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many viewers may even see it as a positive, because HDR looks a bit more striking as a result. From the point of view of fidelity to the source material, however, it’s not ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is rather unusual for LG. In previous generations the brand’s TVs typically held very closely to the reference picture curve after calibration. The C6 is still very close to the standard, but that subtle brightness 'boost' can indeed be noticed in films and TV series.

Although in 4K HDR materials the fluidity of tonal transitions in the ChooseTV Pro is not a problem at all, naturally with weaker signal quality – such as with television, HD materials, or older Full HD films – imperfections may occur. Therefore, it's crucial how the television handles these limitations thanks to the image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a visible yet not overdone way. However, it's important to remember that Samsung has a tendency to be aggressive – even at the lowest level of this feature, it can "eat" film grain. So, it's wise to use it with caution and adjust the settings according to the material being watched.

The upscaling itself is of a high standard. The ChooseTV Pro effectively boosts older materials to a native 4K resolution, maintaining good sharpness and clarity. Movies and series in lower quality simply look better here. However, it's worth mentioning a minor downside – typical for many Samsung televisions. With very old sources in poor quality, you may notice some cropping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's good to know that it may occur.

Here the LG C6 has taken a really big step forward. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very close. That's a big plus, because in this area LG's processor this year performs excellently. The "Smooth Gradation" function works particularly well. With heavily compressed material it can effectively hide ugly tonal banding and artefacts that often appear, for example, in lower-quality streaming. It's best to leave it on the "Low" setting. Then the improvement is clear, and the TV doesn't yet start blurring fine detail. Higher levels smooth the image more aggressively, but can already remove some of the natural texture of objects on screen. Upscaling itself also performs very well. Lower-resolution content is properly sharpened, edges look clean, and the processor quite effectively reconstructs fine details. In that respect the C6 is really close to LG's best TVs and the differences compared with the G6 are small.

The fluidity of movement in The Frame Pro is not only due to the panel itself, which operates at a refresh rate of up to 144 Hz, but also the image processor and motion smoothing system. It is thanks to this that we can adjust the way movies or sports broadcasts are displayed to our own preferences. Available are sliders for blur reduction and motion judder reduction – the first function enhances the sharpness of fast movements, while the second helps to soften the effect of the "jumping" image during camera pans. Everyone can choose between a cinematic character of motion and a smoother, more "television" style.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sport and consoles we’ll of course be limited to 120 Hz at most, but even then it’s hard to fault the motion clarity. As you’d expect from an OLED, the panel’s response time is near-instant. Moving objects therefore don’t leave the characteristic smearing you still see on LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during dynamic movement.

For movies and TV, LG has also included a motion smoothing system called TruMotion. In the user settings you’ll find two separate sliders. De-Judder is primarily for low-frame-rate material, namely movies and TV series at 24 fps. You can use it to slightly reduce the characteristic judder or increase it if you prefer a much smoother picture. De-Blur, on the other hand, is useful for higher-frame-rate content, mainly sports broadcasts and 50/60 fps TV.

Samsung The Frame Pro doesn’t pretend to be just a “living room” TV; gamers will also find something for themselves here. The manufacturer has ensured a full package of gaming features: we have support for variable refresh rate (VRR), auto low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on-the-fly – from refresh rates to active image processing modes. Are there downsides? Yes, The Frame Pro doesn’t support Dolby Vision in game mode, but it’s hard to consider this a serious issue – most gamers use HDR10 anyway... so the HGIG mode. Exactly. The biggest surprise was the latest software update. Samsung... completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user cannot enable settings designed with consoles in mind. This is a step backwards, which may disappoint more aware gamers hoping for full compliance with HGiG guidelines. We can only hope that this mistake will be quickly fixed.

An interesting feature of The Frame Pro is also the unusual placement of HDMI 2.1 ports. We have as many as five at our disposal – four are located in the One Connect module, and the fifth, in micro HDMI form, is located directly on the TV. This solution is quite unusual but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimises any potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond counts. We have written separately about input lag, but we can reveal here that by connecting the equipment directly to the TV, we get the absolute maximum response speed from it.

LG has long focused heavily on gamers, and the C6 essentially lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can even run at 165 Hz. On top of that there’s VRR from 40 to 165 Hz, ALLM and a properly functioning HGiG. Another big plus is support for Dolby Vision in games, so the Xbox Series X can use that format without giving up game mode. The package is rounded out by the Game Bar, which lets you quickly check key signal parameters and change settings without leaving your game. In terms of features alone, the C6 is one of those TVs it’s really hard to fault. Whether you play on PlayStation, Xbox or PC, practically everything you could expect from a modern gaming TV is available here.